BS EN 1172:2011
Current
The latest, up-to-date edition.
Copper and copper alloys. Sheet and strip for building purposes
Hardcopy , PDF
English
31-12-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Marking, packaging, labelling
Bibliography
Defines requirements for copper sheet and strip in thicknesses from 0,4 mm up to and including 1 mm and in widths up to and including 1250 mm.
| Committee |
NFE/34
|
| DevelopmentNote |
Supersedes 93/312326 DC. Together with BS EN 1652, BS EN 1653 and BS EN 1654 supersedes BS 2870(1980). (08/2005)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies requirements for copper sheet and strip in thicknesses from 0,4mm up to and including 1mm and in widths up to and including 1250mm.
This European Standard is applicable to sheet and strip for use in building construction, e.g. for roof drainage systems, gutters, down pipes, roof coverings, external wall claddings, dormer windows, verges, chimney flashings and roof valleys.
| Standards | Relationship |
| I.S. EN 1172:2011 | Identical |
| NEN EN 1172 : 2011 | Identical |
| NF EN 1172 : 2012 | Identical |
| UNI EN 1172 : 2012 | Identical |
| UNE-EN 1172:2012 | Identical |
| NBN EN 1172 : 2012 | Identical |
| EN 1172:2011 | Identical |
| SN EN 1172 : 2012 | Identical |
| NS EN 1172 : 2011 | Identical |
| DIN EN 1172:2012-02 | Identical |
| BS 6229:2003 | Flat roofs with continuously supported coverings. Code of practice |
| BS 6915(2001) : 2001 | DESIGN AND CONSTRUCTION OF FULLY SUPPORTED LEAD SHEET ROOF AND WALL COVERINGS - CODE OF PRACTICE |
| BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| DEFSTAN 02-522/2(2004) : 2004 | VERSATILE CONSOLE SYSTEM (VCS) ENGINEERING MANUAL - CATEGORY 2 |
| BS 5534(2003) : 2003 | CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
| 13/30260276 DC : 0 | BS 5642-2:1983+A1 - SILLS AND COPINGS - PART 2: SPECIFICATION FOR COPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 5628-3:2005 | Code of practice for the use of masonry Materials and components, design and workmanship |
| 10/30168896 DC : 0 | PD 6697 - RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES TO BS EN 1996-1-1 AND BS EN 1996-2 |
| EEMUA 105 : 2014 | FACTORY STAIRWAYS, LADDERS AND HANDRAILS (INCLUDING ACCESS PLATFORMS AND RAMPS) |
| DEFSTAN 22-64/3(2004) : 2004 | SPECIFICATION FOR HYDROMETERS (METAL TYPE) NS CAT NOS 0253/2176, 220-579 AND 220-5800 |
| 13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| PD 6697:2010 | Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2 |
| DEFSTAN 22-64/2(2001) : 2001 | SPECIFICATION FOR HYDROMETERS (METAL TYPE) NS CAT NOS O550/2176, O550-99-220-5799 AND O550-99-220-5800 |
| 05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| 02/105033 DC : DRAFT AUG 2002 | BS 5534 - CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 6507-2:2005 | Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines |
| ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 197-3:1983 | Copper and copper alloys — Terms and definitions — Part 3: Wrought products |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 4739:1985 | Wrought copper and copper alloy products — Selection and preparation of specimens and test pieces for mechanical testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.