![header thumbnail](/images/publishers\bsi_cover.gif)
BS EN 14033-1:2017
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\bsi_cover.gif)
Railway applications. Track. Railbound construction and maintenance machines Technical requirements for running
Hardcopy , PDF
English
30-04-2018
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Machine categorization
5 Rolling stock gauge
6 Frame
7 Bogie and running gear
8 Running safety
9 Brakes
10 Buffing and draw gear
11 Operation of track circuits, axle-counters, treadles for
level crossings, hot box detectors and unreleased brake
detectors
12 Running safety equipment
13 Warning equipment and lights
14 Drivers cabs and driving positions
15 Safety design features
16 Environmental conditions
17 Aerodynamic effects
18 Design for recovery purposes
19 Machine marking
20 User information
Annex A (normative) - Application of technical requirements
to machines categories
Annex B (normative) - Special national conditions
Annex C (normative) - Machine diagram with gauge and
critical points
Annex D (normative) - Free space at the end of the machine
Annex E (informative) - Steps, handrails and door handles
Annex F (informative) - Identification plate
Annex G (normative) - Marking
Annex H (normative) - On board safety equipment
Annex I (informative) - Structure of European Standards for
track construction and maintenance machines
Annex J (informative) - Clause by clause comparison with
Commission Regulation (EU) No 1302/2014 (Loc&Pas TSI)
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU Directive
2008/57/EC
Bibliography
Specifies the specific technical railway requirements for running of machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment.
Committee |
RAE/2
|
DevelopmentNote |
Supersedes 08/30189634 DC. (03/2009) Supersedes 14/30258493 DC. (06/2017)
|
DocumentType |
Standard
|
Pages |
120
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard defines the specific technical railway requirements for running of machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment. Special national conditions applicable to specific member states are shown in Annex B.
This European Standard applies to all railbound machines and other vehicles – referred to as machines – running exclusively on the railway (utilizing adhesion between the rail and wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment.
This European Standard applies to machines that are intended to operate signalling and control systems. Other machines are dealt with in other European Standards, see Annex I.
This European Standard is written for 1 435 mm nominal track gauge; special requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, urban railways, railways utilizing other than adhesion between the rail and wheels and road-rail machines which are not included in this standard.
This European Standard covers the railway specific requirements for movements of the machine as a train and movements to reach work sites.
Standards | Relationship |
EN 14033-1:2017 | Identical |
EN 13977:2011 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
EN 14198:2016 | Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives |
EN 15437-1:2009 | Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
EN 15313:2016 | Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance |
EN 15595:2009+A1:2011 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
UIC 527-1 : 3ED 2005 | COACHES, VANS AND WAGONS - DIMENSIONS OF BUFFER HEADS - TRACK LAYOUT ON S-CURVES |
EN 15611:2008+A1:2010 | Railway applications - Braking - Relay valves |
EN 14363:2016 | Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests |
EN 62625-1:2013/A11:2017 | ELECTRONIC RAILWAY EQUIPMENT - ON BOARD DRIVING DATA RECORDING SYSTEM - PART 1: SYSTEM SPECIFICATION (IEC 62625-1:2013) |
UIC 520 : 7ED 2003 | WAGONS, COACHES AND VANS - DRAW GEAR - STANDARDISATION |
EN 14531-1:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles |
EN 15612:2008+A1:2010 | Railway applications - Braking - Brake pipe accelerator valve |
EN 15624:2008+A1:2010 | Railway applications - Braking - Empty-loaded changeover devices |
UIC 515-1 : 2ED 2003 | PASSENGER ROLLING STOCK - TRAILER BOGIES - RUNNING GEAR - GENERAL PROVISIONS APPLICABLE TO THE COMPONENTS OF TRAILERS BOGIES |
EN 14067-4:2013 | Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track |
EN 50121-3-2:2016 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
UIC 541-5 : 4ED 2005 | BRAKES - ELECTROPNEUMATIC BRAKE (EP BRAKE) - ELECTROPNEUMATIC EMERGENCY BRAKE OVERRIDE (EBO) |
EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
EN 13715:2006+A1:2010 | Railway applications - Wheelsets and bogies - Wheels - Tread profile |
EN 15877-1:2012 | Railway applications - Marking on railway vehicles - Part 1: Freight wagons |
EN 50153 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
EN 15839:2012+A1:2015 | Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces |
EN 15153-2:2013 | Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns |
EN 14535-2:2011 | Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements |
EN 286-3:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
EN 15877-2:2013 | Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines |
EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
EN 15220:2016 (edition 2) | Railway applications - Brake indicators |
PREN 15746-2 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
EN 14535-1:2005+A1:2011 | RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS |
UIC 512 : 1979 AMD 2 | ROLLING STOCK - CONDITIONS TO BE FULFILLED IN ORDER TO AVOID DIFFICULTIES IN THE OPERATION OF TRACK CIRCUITS AND TREADLES |
EN 15329:2015 | Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles |
EN 15273-2:2013+A1:2016 | Railway applications - Gauges - Part 2: Rolling stock gauge |
PREN 15746-1 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
EN 15152:2007 | Railway applications - Front windscreens for train cabs |
EN 15273-1:2013+A1:2016/AC:2017 | RAILWAY APPLICATIONS - GAUGES - PART 1: GENERAL - COMMON RULES FOR INFRASTRUCTURE AND ROLLING STOCK |
ISO 8573-1:2010 | Compressed air Part 1: Contaminants and purity classes |
EN 15807:2011 | Railway applications - Pneumatic half couplings |
EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
EN 15179:2007 | Railway applications - Braking - Requirements for the brake system of coaches |
EN 15227:2008+A1:2010 | Railway applications - Crashworthiness requirements for railway vehicle bodies |
EN 14813-1:2006+A1:2010 | Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters |
EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
EN 14531-2:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles |
EN 14601:2005+A1:2010 | Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe |
EN 16116-2:2013 | Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons |
EN 286-4:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
EN 13104:2009+A2:2012 | Railway applications - Wheelsets and bogies - Powered axles - Design method |
UIC 541-03 : 2ED 2015 | BRAKES - SPECIFICATIONS FOR THE CONSTRUCTION OF VARIOUS BRAKE PARTS - DRIVER'S BRAKE VALVE / DRIVER'S BRAKE CONTROLLER |
PREN 15746-4 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 4: TECHNICAL REQUIREMENTS FOR RUNNING, TRAVELLING AND WORKING ON URBAN RAIL |
EN 13261:2009+A1:2010 | Railway applications - Wheelsets and bogies - Axles - Product requirements |
EN 50121-3-1:2017 | Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
EN 15528:2015 | Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure |
EN 15955-2:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
EN 14033-2:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working |
EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
EN 15954-2:2013 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
EN 15153-1 : 2013 COR 2016 | RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 1: HEAD, MARKER AND TAIL LAMPS |
EN 13262:2004+A2:2011 | Railway applications - Wheelsets and bogies - Wheels - Product requirements |
EN 14067-6:2010 | Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment |
EN 16404:2016 | Railway applications - Re-railing and recovery requirements for railway vehicles |
EN 16207:2014 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
EN 15663:2017 | Railway applications - Vehicle reference masses |
EN 15625:2008+A1:2010 | Railway applications - Braking - Automatic variable load sensing devices |
EN 13260:2009+A1:2010 | Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
PREN 15746-3 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 3: TECHNICAL REQUIREMENTS FOR RUNNING |
EN 15806:2010 | Railway applications - Braking - Static brake testing |
EN 12663-1:2010+A1:2014 | Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) |
EN 15955-1 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
UIC 651 : 4ED 2002 | LAYOUT OF DRIVER'S CABS IN LOCOMOTIVES, RAILCARS, MULTIPLE-UNIT TRAINS AND DRIVING TRAILERS |
EN 50238-1 : 2003 COR 2014 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 1: GENERAL |
EN 13103:2009+A2:2012 | Railway applications - Wheelsets and bogies - Non powered axles - Design method |
EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
EN ISO 7010 : 2012 AMD 7 2017 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016) |
EN 13979-1:2003+A2:2011 | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels |
EN 12663-2:2010 | Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons |
EN 13749:2011 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
UIC 541-1 : 8ED 2013 | BRAKES - REGULATIONS CONCERNING THE DESIGN OF BRAKE COMPONENTS |
EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
EN 15954-1 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING |
EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
EN 15355:2008+A1:2010 | Railway applications - Braking - Distributor valves and distributor-isolating devices |
UIC 544-1 : 6ED 2014 | BRAKES - BRAKING PERFORMANCE |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.