![header thumbnail](/images/publishers\bsi_cover.gif)
BS EN 1559-2:2014
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\bsi_cover.gif)
Founding. Technical conditions of delivery Additional requirements for steel castings
Hardcopy , PDF
English
31-10-2014
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by
the purchaser
5 Designations
6 Manufacture
7 Requirements
8 Inspection
9 Marking
10 Packaging and surface protection
11 Complaints
Annex A (informative) - Mandatory and/or optional
information checklist
Annex B (informative) - Significant technical changes
between this European Standard and the previous
edition
Bibliography
Defines the additional technical delivery conditions for steel castings unless other conditions have been agreed at the time of enquiry and order.
Committee |
ISE/111
|
DevelopmentNote |
Supersedes 95/712664 DC. (08/2004) Supersedes 12/30266615 DC. (10/2014)
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This part of EN1559 specifies the additional technical delivery conditions for steel castings unless other conditions have been agreed at the time of enquiry and order. This European Standard is also applicable to nickel and cobalt alloy castings.
Standards | Relationship |
EN 1559-2:2014 | Identical |
NBN EN 1559-2 : 2014 | Identical |
SN EN 1559-2 : 2014 | Identical |
I.S. EN 1559-2:2014 | Identical |
NEN EN 1559-2 : 2014 | Identical |
NF EN 1559-2 : 2014 | Identical |
UNI EN 1559-2 : 2014 | Identical |
NS EN 1559-2 : 2014 | Identical |
UNE-EN 1559-2:2000 | Identical |
DIN EN 1559-2:2014-12 | Identical |
BS EN 1856-1:2009 | Chimneys. Requirements for metal chimneys System chimney products |
05/30135982 DC : DRAFT JUL 2005 | BS 715 - SPECIFICATION FOR METAL FLUE BOXES FOR GAS FIRED APPLIANCES NOT EXCEEDING 20 KW |
BS 7926:1998 | Quantitative micrographic methods to determine the percentage content of non-metallic inclusions in cast steel |
BS 715:2005 | Specification for metal flue boxes for gas-fired appliances not exceeding 20 kW |
EN 14784-2:2005 | Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays |
EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
EN 12680-2:2003 | Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
EN 12680-1:2003 | Founding - Ultrasonic examination - Part 1: Steel castings for general purposes |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
ISO 5579:2013 | Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
ISO 16810:2012 | Non-destructive testing — Ultrasonic testing — General principles |
EN ISO 9934-1:2016 | Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016) |
EN ISO 19232-1:2013 | Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013) |
EN ISO 16810:2014 | Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012) |
EN ISO 5579:2013 | Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013) |
EN 1370:2011 | Founding - Examination of surface condition |
EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
EN 1371-2:2015 | Founding - Liquid penetrant testing - Part 2: Investment castings |
ISO 9934-1:2016 | Non-destructive testing — Magnetic particle testing — Part 1: General principles |
EN ISO 3651-1 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - PART 1: AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN NITRIC ACID MEDIUM BY MEASUREMENT OF LOSS IN MASS (HUEY TEST) |
ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
EN 1369:2012 | Founding - Magnetic particle testing |
ISO 19232-1:2013 | Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
EN 14784-1:2005 | Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems |
EN 12681 : 2003 | FOUNDING - RADIOGRAPHIC EXAMINATION |
EN 13018:2016 | NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES |
ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
ISO 4990:2015 | Steel castings — General technical delivery requirements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.