BS EN 1679-1 : 1998
Current
Current
The latest, up-to-date edition.
RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
Amended by
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-1998
Publisher
€211.19
Excluding VAT
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 General
5 List of hazards
6 Safety requirements and/or measures
7 Operating and maintenance instructions
8 Special requirements
9 Marking
Annex A (normative) - List of hazards
Annex B (informative) - Bibliography
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Defines the safety requirements for compression ignition engines and their essential auxiliaries used in all applications on land, underground and water, except engines used to propel road vehicles and aircraft.
| Committee |
MCE/14/-/2
|
| DevelopmentNote |
Supersedes 94/713051 DC. (09/2005) 1998 Edition Re-Issued in April 2011 & incorporates AMD 1 2011. (04/2011)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 1679-1:1998+A1:2011 | Identical |
| DIN EN 1679-1:2011-09 | Identical |
| NF EN 1679-1 : 1998 + A1 2011 | Identical |
| NBN EN 1679-1 : 1998 + A1 2011 | Identical |
| NS EN 1679-1 : 1998 + A1 2011 | Identical |
| NEN EN 1679-1 : 1998 + A1 2011 | Identical |
| I.S. EN 1679-1:1998 | Identical |
| EN 1679-1:1998 | Equivalent |
| UNE-EN 1679-1:1998 | Identical |
| 11/30218915 DC : DRAFT JAN 2011 | BS 6164 - CODE OF PRACTICE FOR HEALTH AND SAFETY IN TUNNELING IN THE CONSTRUCTION INDUSTRY |
| BS 6164:2011 | Code of practice for health and safety in tunnelling in the construction industry |
| BS 6164:2001 | Code of practice for safety in tunnelling in the construction industry |
| EN ISO 14314:2009 | Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) |
| EN 1834-3:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
| ISO 3046-7:1995 | Reciprocating internal combustion engines — Performance — Part 7: Codes for engine power |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| ISO 8178-5:2015 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels |
| EN ISO 11102-2:2009 | Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| ISO 2710-1:2000 | Reciprocating internal combustion engines — Vocabulary — Part 1: Terms for engine design and operation |
| ISO 2710-2:1999 | Reciprocating internal combustion engines — Vocabulary — Part 2: Terms for engine maintenance |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| ISO 7967-9:2010 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 9: Control and monitoring systems |
| ISO 3411:2007 | Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN ISO 3411:2007 | Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
| EN 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| EN 1834-2:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
| IEC 60331-11:1999+AMD1:2009 CSV | Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 60332-2-2:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
| ISO 8178-1:2017 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions |
| ISO 8178-2:2008 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions |
| ISO 7967-4:2005 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 4: Pressure charging and air/exhaust gas ducting systems |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| ISO 7967-1:2005 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 1: Structure and external covers |
| IEC 60332-2-2:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
| ISO 8999:2001 | Reciprocating internal combustion engines — Graphical symbols |
| ISO 11102-1:1997 | Reciprocating internal combustion engines — Handle starting equipment — Part 1: Safety requirements and tests |
| EN 1175-1:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
| EN 1175-3:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
| ISO 3046-5:2001 | Reciprocating internal combustion engines — Performance — Part 5: Torsional vibrations |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN 1175-2:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks |
| ISO 7967-8:2005 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 8: Starting systems |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| ISO 9611:1996 | Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Measurement of velocity at the contact points of machinery when resiliently mounted |
| ISO 7967-3:2010 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 3: Valves, camshaft drives and actuating mechanisms |
| ISO 14314:2004 | Reciprocal internal combustion engines — Recoil starting equipment — General safety requirements |
| ISO 3046-4:2009 | Reciprocating internal combustion engines — Performance — Part 4: Speed governing |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 12100-2:2003 | Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles |
| IEC 60331-21:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV |
| ISO 13857:2008 | Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs |
| IEC 60332-2-1:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
| ISO 3046-1:2002 | Reciprocating internal combustion engines — Performance — Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods — Additional requirements for engines for general use |
| ISO 8178-7:2015 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 8178-4:2017 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state and transient test cycles for different engine applications |
| ISO 12100-1:2003 | Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology |
| ISO 13850:2015 | Safety of machinery — Emergency stop function — Principles for design |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 60332-2-1:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
| ISO 6826:1997 | Reciprocating internal combustion engines — Fire protection |
| ISO 2867:2011 | Earth-moving machinery — Access systems |
| ISO 6798:1995 | Reciprocating internal combustion engines — Measurement of emitted airborne noise — Engineering method and survey method |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN ISO 11102-1:2009 | Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997) |
| ISO 3046-3:2006 | Reciprocating internal combustion engines — Performance — Part 3: Test measurements |
| ISO 2261:1994 | Reciprocating internal combustion engines — Hand-operated control devices — Standard direction of motion |
| ISO 8178-6:2000 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test |
| ISO 8178-8:2015 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination |
| EN 1834-1:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
| EN 60034-5:2001/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| ISO 11102-2:1997 | Reciprocating internal combustion engines — Handle starting equipment — Part 2: Method of testing the angle of disengagement |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.