Skip to content
Please enter a keyword to search

  • EN 1679-1:1998+A1:2011

    Current The latest, up-to-date edition.

    Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines

    Available format(s): 

    Language(s): 

    Published date:  12-01-2011

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Definitions
    4 General
    5 List of hazards
    6 Safety requirements and/or measures
    7 Operating and maintenance instructions
    8 Special requirements
    9 Marking
    Annex A (normative) - List of hazards
    Annex B (informative) - Bibliography
    Annex ZA (informative) - Relationship between this European
             Standard and the Essential Requirements of EU
             Directive 2006/42/EC

    Abstract - (Show below) - (Hide below)

    This standard specifies the safety requirements for compression ignition engines and their essential auxiliaries used in all applications on land, underground and water, except engines used to propel road vehicles and aircraft. The special requirements needed to cover operation in potentially explosive atmospheres are not covered in this standard.The engine in terms of this standard is understood as the prime mover up to its driving extremitie(s) for power take off(s).The hazards relevant to compression ignition engines are identified in annex A.This standard should be referred to in other standards wherever compression ignition engines are used.This European Standard is not applicable to compression ignition engines which are manufactured before the date of its publication as EN.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 270
    Development Note 1998 Edition Re-Issued in January 2011 & incorporates AMD 1 2011. (01/2011)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS ISO 20474-1:2017 Earth-moving machinery. Safety General requirements
    07/30158774 DC : 0 BS EN 791 AMD1 - DRILL RIGS - SAFETY
    10/30211242 DC : 0 BS EN 12601 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
    10/30185766 DC : 0 BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
    DIN EN 1889-2 E : 2009 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
    BS EN 12111:2014 Tunnelling machines. Road headers and continuous miners. Safety requirements
    BS EN 1889-1:2011 Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles
    BS EN 12601:2010 Reciprocating internal combustion engine driven generating sets. Safety
    BS EN 1834-3:2000 Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable dust atmospheres
    DIN EN 12601:2011-07 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
    EN 12601:2010 Reciprocating internal combustion engine driven generating sets - Safety
    01/105373 DC : DRAFT JUL 2001 BS EN 474-1 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    BS ISO 14885:2014 Large yachts. Diesel engines for main propulsion and essential auxiliaries. Safety requirements
    12/30259316 DC : 0 BS ISO 14885 - SHIPS AND MARINE TECHNOLOGY - LARGE YACHTS - AUXILIARY DIESEL ENGINES - SAFETY REQUIREMENTS
    PREN 1889-1 : DRAFT 2010 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
    PREN 12601 : DRAFT 2010 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
    I.S. EN 12111:2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
    I.S. EN 1889-1:2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
    I.S. EN ISO 14314:2009 RECIPROCAL INTERNAL COMBUSTION ENGINES - RECOIL STARTING EQUIPMENT - GENERAL SAFETY REQUIREMENTS
    I.S. EN 1889-2:2003 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
    DIN EN ISO 14314:2010-01 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)
    BS EN ISO 14314:2009 Reciprocal internal combustion engines. Recoil starting equipment. General safety requirements
    UNE-EN 1889-1:2012 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
    DIN EN 1889-1:2011-10 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
    UNI EN 1889-1 : 2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
    UNI EN 12601 : 2011 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
    UNI EN 1889-2 : 2009 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
    UNI EN 12111 : 2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
    UNI EN ISO 14314 : 2010 RECIPROCAL INTERNAL COMBUSTION ENGINES - RECOIL STARTING EQUIPMENT - GENERAL SAFETY REQUIREMENTS
    I.S. EN 12601:2010 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
    ISO 14885:2014 Large yachts Diesel engines for main propulsion and essential auxiliaries Safety requirements
    UNE-EN 12601:2011 Reciprocating internal combustion engine driven generating sets - Safety
    BS EN 1889-2 : 2003 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
    BS EN 1834-1:2000 Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable gas and vapour atmospheres
    ISO 14314:2004 Reciprocal internal combustion engines Recoil starting equipment General safety requirements
    UNE-EN ISO 14314:2010 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)
    BS EN 1834-2:2000 Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
    EN 1834-1:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
    EN 1889-1:2011 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
    EN ISO 14314:2009 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)
    EN 1834-3:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres
    EN 1889-2:2003+A1:2009 Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
    EN 1834-2:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
    DIN EN 1889-1 E : 2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
    DIN EN 1889-2:2009-07 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
    EN 12111:2014 Tunnelling machines - Road headers and continuous miners - Safety requirements

    Standards Referencing This Book - (Show below) - (Hide below)

    EN ISO 14314:2009 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)
    EN 1834-3:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres
    ISO 3046-7:1995 Reciprocating internal combustion engines — Performance — Part 7: Codes for engine power
    EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
    ISO 8178-5:2015 Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels
    EN ISO 11102-2:2009 Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)
    IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
    ISO 2710-1:2000 Reciprocating internal combustion engines Vocabulary Part 1: Terms for engine design and operation
    ISO 2710-2:1999 Reciprocating internal combustion engines Vocabulary Part 2: Terms for engine maintenance
    IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
    ISO 7967-9:2010 Reciprocating internal combustion engines Vocabulary of components and systems Part 9: Control and monitoring systems
    ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
    EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
    EN ISO 3411:2007 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
    EN 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
    EN 1834-2:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
    IEC 60331-11:1999+AMD1:2009 CSV Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
    ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
    EN 60332-2-2:2004 Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
    ISO 8178-1:2017 Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions
    ISO 8178-2:2008 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
    ISO 7967-4:2005 Reciprocating internal combustion engines Vocabulary of components and systems Part 4: Pressure charging and air/exhaust gas ducting systems
    EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
    ISO 7967-1:2005 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 1: Structure and external covers
    IEC 60332-2-2:2004 Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
    ISO 8999:2001 Reciprocating internal combustion engines Graphical symbols
    ISO 11102-1:1997 Reciprocating internal combustion engines Handle starting equipment Part 1: Safety requirements and tests
    EN 1175-1:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
    EN 1175-3:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
    ISO 3046-5:2001 Reciprocating internal combustion engines Performance Part 5: Torsional vibrations
    EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
    EN 1175-2:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
    ISO 7967-8:2005 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 8: Starting systems
    EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
    ISO 9611:1996 Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Measurement of velocity at the contact points of machinery when resiliently mounted
    ISO 7967-3:2010 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 3: Valves, camshaft drives and actuating mechanisms
    ISO 14314:2004 Reciprocal internal combustion engines Recoil starting equipment General safety requirements
    EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    ISO 3046-4:2009 Reciprocating internal combustion engines Performance Part 4: Speed governing
    EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
    ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
    IEC 60331-21:1999 Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
    ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
    EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    IEC 60332-2-1:2004 Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
    ISO 3046-1:2002 Reciprocating internal combustion engines Performance Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods Additional requirements for engines for general use
    ISO 8178-7:2015 Reciprocating internal combustion engines Exhaust emission measurement Part 7: Engine family determination
    EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
    ISO 8178-4:2017 Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    EN 60332-2-1:2004 Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
    ISO 6826:1997 Reciprocating internal combustion engines Fire protection
    ISO 2867:2011 Earth-moving machinery Access systems
    ISO 6798:1995 Reciprocating internal combustion engines Measurement of emitted airborne noise Engineering method and survey method
    EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    EN ISO 11102-1:2009 Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997)
    ISO 3046-3:2006 Reciprocating internal combustion engines Performance Part 3: Test measurements
    ISO 2261:1994 Reciprocating internal combustion engines Hand-operated control devices Standard direction of motion
    ISO 8178-6:2000 Reciprocating internal combustion engines Exhaust emission measurement Part 6: Report of measuring results and test
    EN 286-1:1998/A2:2005 SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES
    ISO 8178-8:2015 Reciprocating internal combustion engines Exhaust emission measurement Part 8: Engine group determination
    EN 1834-1:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
    EN 60034-5:2001/A1:2007 ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION
    ISO 11102-2:1997 Reciprocating internal combustion engines Handle starting equipment Part 2: Method of testing the angle of disengagement
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective