BS EN 45501:2015
Current
The latest, up-to-date edition.
Metrological aspects of non-automatic weighing instruments
Hardcopy , PDF
English
28-02-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
Terminology
1 Scope
2 Principles of the European Standard
3 Metrological requirements
4 Technical requirements for self- or
semi-self-indicating instruments
5 Technical requirements for electronic instruments
6 Technical requirements for non-self-indicating instruments
7 Marking of instruments and modules
8 Metrological controls
Annex A (normative) - Testing procedures for non-automatic
weighing instruments
Annex B (normative) - Additional tests for electronic
instruments
Annex C (normative) - Testing and Evaluation of indicators
and analog data processing devices as modules of
non-automatic weighing instruments
Annex D (normative) - Testing and Evaluation of digital data
processing devices, terminals and digital displays as
modules of non-automatic weighing instruments
Annex E (normative) - Testing and Evaluation of weighing
modules as modules of non-automatic weighing
instruments
Annex F (normative) - (Mandatory for separately tested
modules) Compatibility checking of modules of
non-automatic weighing instruments
Annex G (normative) - Additional examinations and tests
for software-controlled digital devices and instruments
Annex ZZ (informative) - Coverage of Essential
Requirements of EC Directives
Bibliography
Describes the metrological and technical requirements for non-automatic weighing instruments.
| Committee |
CPL/705
|
| DevelopmentNote |
Supersedes BS 1887(1966), BS 4960(1986), BS 6624(1985) and 89/22198 DC (03/2003) Supersedes 11/30254162 DC. (02/2015)
|
| DocumentType |
Standard
|
| Pages |
146
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies the metrological and technical requirements for non-automatic weighing instruments.
It is intended to provide standardized requirements and testing procedures to evaluate the metrological and technical characteristics in a uniform and traceable way.
| Standards | Relationship |
| NF EN 45501 : 2015 | Identical |
| EN 45501 : 2015 | Identical |
| DIN EN 45501:2016-03 | Identical |
| UNE-EN 45501:2016 | Identical |
| NS EN 45501 : 2015 | Identical |
| NEN EN 45501 : 2015 | Identical |
| NBN EN 45501 : 2015 | Identical |
| I.S. EN 45501:2015 | Identical |
| EN 45501:2015 | Identical |
| BS 2782-11.1133B(1997) : 1997 | METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - PLASTICS PIPING SYSTEMS - THERMOPLASTICS VALVES - TEST METHOD FOR THE INTEGRITY OF A VALVE AFTER TEMPERATURE CYCLING UNDER BENDING |
| BS EN 1704:1997 | Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending |
| EN 60068-3-1:2011 | Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| EN 61000-4-1:2007 | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
| OIML D 11 : 2013 | GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS |
| ISO 7637-3:2016 | Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| EN 61000-4-11:2004/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017) |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60068-3-1:2011 | Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
| IEC 60801-4:1988 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 4: Electrical fast transient/burst requirements |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| OIML B 3 : 2011 | OIML BASIC CERTIFICATE SYSTEM FOR OIML TYPE EVALUATION OF MEASURING INSTRUMENTS |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| OIML B 10 : 2011 AMD 2012 | FRAMEWORK FOR A MUTUAL ACCEPTANCE ARRANGEMENT ON OIML TYPE EVALUATIONS |
| IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| OIML R 60 : 2000 ERRATUM 2000 | METROLOGICAL REGULATION FOR LOAD CELLS |
| EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
| IEC 60801-3:1984 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 3: Radiated electromagnetic field requirements |
| EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| EN 60068-3-4:2002 | Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests |
| IEC 60068-2-28:1990 | Environmental testing - Part 2: Tests. Guidance for damp heat tests |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| IEC 60801-2:1991 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.