• OIML D 11 : 2013

    Current The latest, up-to-date edition.

    GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS

    Available format(s): 

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Organisation Internationale de Metrologie Legale

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Introduction
    2 Scope and field of application
    3 Terminology
    4 Instructions for use of this Document in drafting
       OIML Recommendations
    5 Requirements for measuring instruments with
       respect to their environment
    6 Type evaluation
    7 Initial verification
    8 Determination of test levels
    9 Instrument performance tests (general)
    10 Climate related performance tests
    11 Mechanical performance tests
    12 External wiring and mains power supply related
       performance tests
    13 Electromagnetic environment related disturbances
    14 Battery and non-mains power supply related
       performance tests
    Annex A (Informative) - Documentation for type
            evaluation
    Annex B (Informative) - Durability assessment
    Annex C (Informative) - Facility for tests on barometric
            pressure
    Annex D (Informative) - Bibliography and notes

    Abstract - (Show below) - (Hide below)

    Gives the OIML Technical Committees, Subcommittees and Project Groups with guidance for establishing appropriate metrological performance testing requirements for influence quantities which may affect the measuring instruments covered by OIML Recommendations. Also gives guidance to OIML Member States in the implementation of OIML Recommendations in their national laws, in particular in their choice on the applicability and severity of performance requirements, as far as these are not prescribed in the OIML Recommendations, but are left to national legislation.

    General Product Information - (Show below) - (Hide below)

    Committee TC 5/SC 1
    Development Note French Version of 2013 edition issued on 27/03/2015. (03/2015)
    Document Type Standard
    Publisher Organisation Internationale de Metrologie Legale
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    11/30217192 DC : 0 BS EN ISO 4064-2 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
    NBR 15855 : 2010 MEASUREMENT OF GAS BY MULTIPATH ULTRASONIC METERS
    OIML D 22 : 1991 GUIDE TO PORTABLE INSTRUMENTS FOR ASSESSING AIRBORNE POLLUTANTS ARISING FROM HAZARDOUS WASTES
    OIML R 140 : 2007 MEASURING SYSTEMS FOR GASEOUS FUEL
    BS EN 12261:2002 GAS METERS - TURBINE GAS METERS
    00/122333 DC : DRAFT JUNE 2000 BS EN 13917-1 - WATER METERS WITHIN THE SCOPE OF DIRECTIVES 75/33/EEC AND 79/830/EEC, EQUIPPED WITH ELECTRONIC TOTALISING DEVICES - PART 1: GENERAL REQUIREMENTS
    04/30031093 DC : DRAFT FEB 2004 ISO 4064-3 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST METHODS AND EQUIPMENT
    13/30289289 DC : 0 BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    12/30266709 DC : 0 BS EN ISO 4064-2 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
    11/30217189 DC : 0 BS EN ISO 4064-1 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    BS EN ISO 4064-4 : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1
    OIML R 139-1 : 2014 COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    DIN EN ISO 4064-4 E : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014)
    BS EN 1434-4 : 2015 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
    OIML R 49-1 : 2013 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    UNI CEI EN ISO 4064-4 : 2014 Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1
    00/122334 DC : DRAFT JUNE 2000 BS EN 13917-2 - WATER METERS WITHIN THE SCOPE OF DIRECTIVES 75/33/EEC AND 79/830/EEC, EQUIPPED WITH ELECTRONIC TOTALISING DEVICES - PART 2: PATTERN APPROVAL TESTS
    BS EN ISO 4064-2:2017 Water meters for cold potable water and hot water Test methods
    PREN 12405-1 : DRAFT 2017 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    BS ISO 12242 : 2012 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC TRANSIT-TIME METERS FOR LIQUID
    BS EN 12405-3 : 2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    BS EN ISO 4064-1:2017 Water meters for cold potable water and hot water Metrological and technical requirements
    12/30236609 DC : 0 BS EN ISO 4064-4 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1
    OIML R 115 : 1995 CLINICAL ELECTRICAL THERMOMETERS WITH MAXIMUM DEVICE
    OIML R 50-1 : 2014 CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    OIML R 80-1 : 2009 ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    12/30236613 DC : 0 BS EN ISO 4064-5 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS
    09/30207853 DC : 0 BS EN 12405-2 - GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    I.S. EN ISO 4064-1:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014)
    OIML R 99-1 & 2 : 2008 INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
    NBR 16043-1 : 2012 MEASUREMENT OF WATER FLOW IN FULLY CHARGED CLOSED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: SPECIFICATIONS
    OIML D 31 : 2008 GENERAL REQUIREMENTS FOR SOFTWARE CONTROLLED MEASURING INSTRUMENTS
    OIML R 117-1 : 2007 DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    11/30243902 DC : 0 BS EN 16280 - BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
    12/30266708 DC : 0 BS EN ISO 4064-1 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    UNI EN 12405-2 : 2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    UNI CEI EN ISO 4064-2 : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
    BS EN ISO 4064-5:2017 (published 2017-09) Water meters for cold potable water and hot water Installation requirements
    UNI EN 16280 : 2013 BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
    11/30215951 DC : 0 BS ISO 17089-2 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 2: METERS FOR INDUSTRIAL APPLICATIONS
    ISO 18132-2:2008 Refrigerated light hydrocarbon fluids — General requirements for automatic level gauges — Part 2: Gauges in refrigerated-type shore tanks
    BS EN 16280:2012 (published 2012-11) Breath alcohol test devices for general public. Requirements and test methods
    OIML R 21 : 2007 TAXIMETERS - METROLOGICAL AND TECHNICAL REQUIREMENTS, TEST PROCEDURES AND TEST REPORT FORMAT
    NBR 16043-3 : 2012 MEASUREMENT OF WATER FLOW IN FULLY CHARGED CLOSED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3:TEST METHODS AND EQUIPMENT
    11/30254162 DC : 0 BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    08/30169640 DC : 0 BS ISO 17089-1 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT
    DIN EN 12405-2:2012-10 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    OIML R 137-1 : 2006 GAS METERS - PART 1: REQUIREMENTS
    DIN EN ISO 4064-4:2014-11 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014)
    BS ISO 18132-2:2008 (published 2008-05) Refrigerated light hydrocarbon fluids. General requirements for automatic level gauges Gauges in refrigerated-type shore tanks
    BS EN 12405-2 : 2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    10/30232464 DC : 0 BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
    17/30356728 DC : 0 BS EN 12261 - GAS METERS - TURBINE GAS METERS
    OIML R 146-1 : 2016 PROTEIN MEASURING INSTRUMENTS FOR CEREAL GRAIN AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    BS EN 15964:2011 (published 2011-06) Breath alcohol test devices other than single use devices. Requirements and test methods
    DIN EN 12405-3 E : 2016 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    BS ISO 17089-1:2010 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT
    OIML R 144-2 : 2013 INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 2: METROLOGICAL AND PERFORMANCE TESTS
    OIML R 46-1 & 2 : 2012 ACTIVE ELECTRICAL ENERGY METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
    09/30202737 DC : 0 BS EN 15964 - BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS
    04/30031075 DC : DRAFT FEB 2004 ISO 4064-1 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: SPECIFICATIONS
    UNE-EN ISO 4064-2:2015 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
    ASTM E 3137/E3137M : 2017 Standard Specification for Heat Meter Instrumentation
    UNE-EN 16280:2013 Breath alcohol test devices for general public - Requirements and test methods
    PREN 12405-3 : DRAFT 2013 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    OIML R 76-1 : 2006 NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
    PREN 12261 : DRAFT 2017 GAS METERS - TURBINE GAS METERS
    UNE-EN 12405-2:2013 Gas meters - Conversion devices - Part 2: Energy conversion
    OIML R 143 : 2009 INSTRUMENTS FOR THE CONTINUOUS MEASUREMENT OF SO[2] IN STATIONARY SOURCE EMISSIONS
    OIML R 85-1 & 2 : 2008 AUTOMATIC LEVEL GAUGES FOR MEASURING THE LEVEL OF LIQUID IN STATIONARY STORAGE TANKS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROL AND TESTS
    OIML R 137-1 & 2 : 2012 AMD 2014 GAS METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
    DIN EN 1434-4:2016-02 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
    OIML R 139-2 : 2014 COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
    UNE-EN 15964:2012 Breath alcohol test devices other than single use devices - Requirements and test methods
    UNE-EN 12405-3:2016 Gas meters - Conversion devices - Part 3: Flow computer
    DIN EN 12405-3:2016-04 Gas meters - Conversion devices - Part 3: Flow computer
    OIML R 134-1 : 2006 AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
    OIML R 60 ANNEXES : 2017 METROLOGICAL REGULATION FOR LOAD CELLS ANNEXES
    UNI EN 15964 : 2011 BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS
    OIML R 144-1 : 2013 INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    ISO 12242:2012 Measurement of fluid flow in closed conduits Ultrasonic transit-time meters for liquid
    UNE-EN 12405-1:2006 Gas meters - Conversion devices - Part 1: Volume conversion
    PREN 45501 : DRAFT 2011 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    UNI EN 12405-1 : 2010 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    I.S. EN ISO 4064-5:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS (ISO 4064-5:2014)
    I.S. EN 12405-2:2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    EN 1434-4:2015 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
    I.S. EN 12405-3:2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    I.S. EN 16280:2012 BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 4064-4:2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014)
    I.S. EN 1434-1:2015 HEAT METERS - PART 1: GENERAL REQUIREMENTS
    BS EN 12405-1 : 2005 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    OIML R 139 : 2007 COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES
    OIML R 49-2 : 2013 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
    OIML R 80-2 : 2017 ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 2: METROLOGICAL CONTROLS AND TESTS
    UNI CEI EN ISO 4064-5 : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS
    UNI CEI EN ISO 4064-1 : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    EN 1434-1:2015 HEAT METERS - PART 1: GENERAL REQUIREMENTS
    UNE-EN ISO 4064-1:2015 Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014)
    DIN EN 12261:2007-07 GAS METERS - TURBINE GAS METERS
    UNE-EN 1434-4:2016 Heat meters - Part 4: Pattern approval tests
    OIML B 3 : 2011 OIML BASIC CERTIFICATE SYSTEM FOR OIML TYPE EVALUATION OF MEASURING INSTRUMENTS
    OIML R 35-2 : 2011 MATERIAL MEASURES OF LENGTH FOR GENERAL USE - PART 2: TEST METHODS
    I.S. EN 1434-4:2015 HEAT METERS - PART 4: PATTERN APPROVAL TESTS
    OIML R 35-1 : 2007 AMD 2014 MATERIAL MEASURES OF LENGTH FOR GENERAL USE - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    OIML R 59-1 : 2016 MOISTURE METERS FOR CEREAL GRAINS AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    EN 12261:2018 GAS METERS - TURBINE GAS METERS
    17/30356731 DC : 0 BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    DIN EN 1434-1:2016-02 HEAT METERS - PART 1: GENERAL REQUIREMENTS
    BS EN 1434-1 : 2015 HEAT METERS - PART 1: GENERAL REQUIREMENTS
    OIML R 50-2 : 2014 CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 2: TEST PROCEDURES
    OIML R 114 : 1995 CLINICAL ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT
    OIML R 126 : 2012 EVIDENTIAL BREATH ANALYZERS
    PREN 15964 : DRAFT 2009 BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS
    I.S. EN 15964:2011 BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 4064-2:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
    I.S. EN 12405-1:2005 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    DIN EN ISO 4064-5 E : 2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS (ISO 4064-5:2014)
    ISO 17089-2:2012 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 2: Meters for industrial applications
    EN 12480:2018 Gas meters - Rotary displacement gas meters
    EN 12405-1:2005+A2:2010 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    ISO 17089-1:2010 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement
    API 551 : 2016 PROCESS MEASUREMENT
    I.S. EN 12480:2018 GAS METERS - ROTARY DISPLACEMENT GAS METERS
    UNE-EN 1434-1:2016 Heat meters - Part 1: General requirements
    I.S. EN 12261:2002 GAS METERS - TURBINE GAS METERS
    DIN EN 12645:2015-02 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
    DIN EN 14268 E : 2005 IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
    DIN EN 12405-1:2011-04 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    DIN EN 45501:2016-03 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    DIN EN 14268:2005-11 IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
    BS EN 45501:2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    UNE-EN 12645:2015 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
    BS EN 12645:2014 (published 2014-08) Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing
    ISO 4064-4:2014 Water meters for cold potable water and hot water Part 4: Non-metrological requirements not covered in ISO 4064-1
    ISO 4064-1:2014 Water meters for cold potable water and hot water Part 1: Metrological and technical requirements
    ISO 4064-2:2014 Water meters for cold potable water and hot water Part 2: Test methods
    ISO 4064-5:2014 Water meters for cold potable water and hot water Part 5: Installation requirements
    UNE-EN ISO 4064-4:2015 Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2014)
    DIN EN 1434-4:2019-08 Compteurs d’énergie thermique – Partie 4: Essais en vue de l’approbation de modèle; Version anglaise EN 14344: 2015+A1:2018, Traduction anglaise de DIN EN 1434-4:2019-08
    I.S. EN 12645:2014 TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING
    I.S. EN 45501:2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    EN 12405-2 : 2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    EN 12645:2014 TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING
    EN 12405-3 : 2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    EN 45501 : 2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
    DIN EN ISO 4064-5:2017-10 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS (ISO 4064-5:2014)
    DIN EN ISO 4064-1:2017-10 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014)
    EN ISO 4064-1:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014)
    EN ISO 4064-2:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
    EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods
    EN ISO 4064-5:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS (ISO 4064-5:2014)
    EN 14268:2005/AC:2007 IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
    EN 16280 : 2012 BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
    UNI EN 12645 : 2014 TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING
    UNI EN 14268 : 2006 IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61000-4-8 : 2.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
    IEC 61000-4-19:2014 Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
    ISO 16750-2:2012 Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 2: Electrical loads
    IEC 60068-2-18:2017 Environmental testing - Part 2-18: Tests - Test R and guidance: Water
    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
    ISO 7637-3:2016 Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
    IEC 61000-4-1:2006 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
    ISO 7637-1:2015 Road vehicles Electrical disturbances from conduction and coupling Part 1: Definitions and general considerations
    IEC 60068-3-1:2011 ENVIRONMENTAL TESTING - PART 3-1: SUPPORTING DOCUMENTATION AND GUIDANCE - COLD AND DRY HEAT TESTS
    IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
    IEC 60512-11-8:1995 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS - CLIMATIC TESTS - TEST 11H - SAND AND DUST
    ISO 7637-2:2011 Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only
    IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
    IEC 60721-2-5:1991 Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 5: Dust, sand, salt mist
    IEC 60068-2-11:1981 ENVIRONMENTAL TESTING - TEST KA: SALT MIST
    IEC 61000-4-17:1999+AMD1:2001+AMD2:2008 CSV Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
    IEC 60068-2-31:2008 ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
    IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
    IEC 60512-14-7:1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS - SEALING TESTS - IMPACTING WATER
    IEC TR 61000-2-5:2017 Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments
    IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    IEC 60068-2-47:2005 Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
    IEC 60068-3-8:2003 Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 61000-4-20:2010 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
    IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
    IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    IEC TR 61000-2-1:1990 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
    IEC 61000-2-2:2002+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
    IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
    IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
    IEC 60068-3-4:2001 ENVIRONMENTAL TESTING - PART 3-4: SUPPORTING DOCUMENTATION AND GUIDANCE - DAMP HEAT TESTS
    IEC 61000-4-29:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    OIML V 1 : 2013 INTERNATIONAL VOCABULARY OF TERMS IN LEGAL METROLOGY (VIML)
    OIML V 2-200 : 2012 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
    IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests
    IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective