BS EN 485-3:2003
Current
The latest, up-to-date edition.
Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on dimensions and form for hot-rolled products
Hardcopy , PDF
English
26-03-2003
Foreword
1 Scope
2 Normative references
3 Tolerances on dimension
3.1 Thickness
3.2 Width
3.3 Length
4 Tolerances on form
4.1 Lateral curvature
4.2 Flatness
4.3 Squareness
Bibliography
Gives the tolerances on form and dimensions for wrought aluminium and aluminium alloy sheet, strip and plate obtained by hot-rolling, for general engineering applications Applicable to products with a thickness from 25 mm up to and including 400 mm.
Committee |
NFE/35
|
DevelopmentNote |
Together with BS EN 485-1, BS EN 485-2, BS EN 485-4, BS EN 515, BS EN 573-1, BS EN 573-2, BS EN 573-3 and BS EN 573-4 supersedes BS 1470(1987) Supersedes 99/710777 DC (04/2003) Reviewed and Confirmed by BSI, May 2007. (04/2007)
|
DocumentType |
Standard
|
Pages |
14
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This part of this European Standard specifies the tolerances on form and dimensions for wrought aluminium and aluminium alloy sheet, strip and plate obtained by hot-rolling, for general engineering applications.
It applies to products with a thickness from 2,5 mm up to and including 400 mm.
It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, etc. sheet and strip or to special applications such as aerospace which are dealt with in separate European Standards.
Technical conditions for inspection and delivery of products covered by this standard are specified in EN 485-1.
NOTE Some of the products listed in the present standard can be subject to patent or patent applications, and their listing herein does not in any way imply the granting of a licence under such patent right.
CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licences on standardised standard products under reasonable and not discriminatory conditions, then this product shall be removed from the corresponding standard.
Standards | Relationship |
EN 485-3:2003 | Identical |
NEN EN 485-3 : 2003 | Identical |
I.S. EN 485-3:2003 | Identical |
NS EN 485-3 : 2ED 2003 | Identical |
SN EN 485-3 : 2003 | Identical |
UNI EN 485-3 : 2005 | Identical |
NF EN 485-3 : 2003 | Identical |
NBN EN 485-3 : 2003 | Identical |
UNE-EN 485-3:2003 | Identical |
DIN EN 485-3:2003-06 | Identical |
DEFSTAN 02-120/2(2002) : INTERIM | REQUIREMENTS FOR WATER CLOSETS, URINALS, BATHROOMS AND WASHING FACILITIES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 95-33/1(2004) : 2004 | ALUMINIUM ALLOY (7019) FOR STRUCTURAL (NON-ARMOUR) APPLICATIONS |
DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
DEFSTAN 95-31/2(2004) : 2004 | ALUMINIUM ALLOY ARMOUR PLATE (7019) |
BS 6229:2003 | Flat roofs with continuously supported coverings. Code of practice |
DEFSTAN 02-840/3(2021):2021 | Requirements for Aluminium Alloy Patterned Treadplate and Treadstrip |
DEFSTAN 02-128/2(2008) : 2008 | FURNITURE AND ASSOCIATED EQUIPMENT REQUIREMENTS FOR HM SHIPS |
08/30176707 DC : DRAFT APR 2008 | BS 336 - SPECIFICATION FOR FIRE HOSE COUPLINGS AND ANCILLARY EQUIPMENT |
DEFSTAN 02-313/1(2000) : 2000 AMD 1 2002 | DIESEL ENGINES FOR MARINE PROPULSION AND AUXILIARY MACHINERY |
DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
EEMUA 105 : 2014 | FACTORY STAIRWAYS, LADDERS AND HANDRAILS (INCLUDING ACCESS PLATFORMS AND RAMPS) |
BS PD5500(2006) : 2006 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
DEFSTAN 95-22/2(2001) : 2001 | ALUMINIUM ALLOY ARMOUR PLATE (HEAT TREATABLE 6-120 MM) |
DEFSTAN 02-121(PT1)/4(2017) : 2017 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES (CATEGORY 2) - PART 1: COMMON REQUIREMENTS |
DEFSTAN 95-22/3(2003) : 2003 | ALUMINIUM ALLOY ARMOUR PLATE (HEAT TREATABLE 6-120 MM) |
DEFSTAN 02-121(PT1)/3(2010) : 2010 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
BS 7818:1995 | Specification for pedestrian restraint systems in metal |
DEFSTAN 02-130/2(2012) : 2012 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
BS 5427-1:1996 | Code of practice for the use of profiled sheet for roof and wall cladding on buildings Design |
BS 5L100(2011) : 2011 | PROCEDURE FOR INSPECTION, TESTING AND ACCEPTANCE OF WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS |
DEFSTAN 95-22/4(2004) : 2004 | ALUMINIUM ALLOY ARMOUR PLATE (HEAT TREATABLE 6-120 MM) |
DEFSTAN 02-121(PT1)/2(2006) : 2006 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
DEFSTAN 02-840/2(2010) : 2010 | REQUIREMENTS FOR ALUMINIUM ALLOY PATTERNED TREADPLATE AND TREADSTRIP |
DEFSTAN 02-522/2(2004) : 2004 | VERSATILE CONSOLE SYSTEM (VCS) ENGINEERING MANUAL - CATEGORY 2 |
DEFSTAN 02-130/1(2007) : 2007 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
DEFSTAN 95-31/1(2002) : 2002 | ALUMINIUM ALLOY ARMOUR PLATE (7019) |
DEFSTAN 02-900(PT0)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
DEFSTAN 02-900(PT0)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.