BS EN 62040-1-2:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations
Hardcopy , PDF
31-03-2009
English
26-03-2004
1 Scope and specific applications
1.1 Scope
1.2 Specific applications
2 Normative references
3 Definitions
4 General requirements
4.1 UPS design and construction
4.2 User information
4.3 Classification of UPS
4.4 General conditions for tests
4.5 Operating parameters for tests
4.6 Loads for tests
4.7 Components
4.8 Power interfaces
4.9 Marking and instructions
5 Fundamental design requirements
5.1 Protection against electric shock and energy
hazards
5.2 SELV
5.3 Emergency switching device
5.4 Backfeed protection
5.5 Insulation
5.6 Safety extra-low voltage (SELV) circuits
5.7 Limited current circuits
5.8 Provisions for protective earthing
5.9 AC and d.c. power isolation
5.10 Overcurrent and earth fault protection
5.11 Service person protection
5.12 Clearances, creepage distances and distances
through insulation
5.13 External signalling circuits
5.14 Limited power source
6 Wiring, connections and supply
6.1 General
6.2 Connection to power sources
6.3 Wiring terminals for external power conductors
7 Physical requirements
7.1 Enclosure
7.2 Stability
7.3 Construction details
7.4 Resistance to fire
7.5 Battery location
7.6 Temperature rise
8 Electrical requirements and simulated abnormal
conditions
8.1 General
8.2 Electric strength
8.3 Abnormal operating and fault conditions
Annexes
Annex ZA (normative) Normative references to international
publication with their corresponding European
publications
Covers electronic uninterruptible power systems with an electrical energy storage device in the d.c. link.
Committee |
PEL/22
|
DevelopmentNote |
Supersedes 99/202880 DC Supersedes BS EN 50091-1.2. To be read in conjunction with BS EN 60950-1 (03/2003)
|
DocumentType |
Standard
|
Pages |
48
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
applies to electronic uninterruptible power systems (UPS) with an electrical energy storage device in the d.c. link. It is to be used with IEC 60950-1 which is referred to in this standard as \'RD\'.
Standards | Relationship |
EN 62040-1-2:2003/corrigendum:2004 | Identical |
UNE-EN 62040-1-2:2004 | Identical |
NF EN 62040-1-2 : 2004 | Identical |
IEC 62040-1-2:2002 | Identical |
I.S. EN 62040-1-2:2004 | Identical |
DIN EN 62040-1-2 : 2003 | Identical |
SN EN 62040-1-2 : 2003 | Identical |
BS 7430(2011) : 2011 | CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
11/30249994 DC : DRAFT JULY 2011 | BS 7430 - CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS |
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
IEC 62040-1-1:2002 | Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas |
EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
EN 61000-2-2:2002/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS (IEC 61000-2-2:2002/A1:2017) |
EN 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
IEC 62040-2:2016 | Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements |
EN 62040-1-1:2003/corrigendum:2004 | |
IEC 60364-4-482:1982 | Electrical installations of buildings. Part 4: Protection for safety. Chapter 48: Choice of protective measures as a function of external influences. Section 482: Protection against fire |
IEC 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60439-1:1999+AMD1:2004 CSV | Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
IEC 61000-2-2:2002+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
EN 60439-1:1999/A1:2004 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.