BS EN ISO 10438-1:2003
Current
The latest, up-to-date edition.
Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements
Hardcopy , PDF
English
24-12-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, abbreviated terms and definitions
3.1 Terms and definitions
3.2 Abbreviated terms
4 General
4.1 Dimensions and units
4.2 Design
4.3 System selection
4.4 Pressure design code
4.5 Basic design
4.6 Welding
4.7 Statutory requirements
4.8 Documentation requirements
5 Piping
5.1 General
5.2 Oil piping
5.3 Instrument piping and tubing
5.4 Process piping
5.5 Intercoolers and aftercoolers
6 Instrumentation, control and electrical systems
6.1 General
6.2 Alarm, shutdown and control systems
6.3 Instrumentation
6.4 Electrical systems
7 Inspection testing, and preparation for shipment
7.1 General
7.2 Inspection
7.3 Testing
7.4 Preparation for shipment
8 Vendor's data
8.1 General
8.2 Proposals
8.3 Contract data
Annex A (informative) Datasheets
Annex B (informative) Symbols
Annex C (informative) Vendor drawing and data
requirements (VDDR)
Annex D (informative) Oil or gas filter performance
and oil-system cleanliness testing
Annex E (informative) International materials specifications
Annex F (informative) Explanation of reservoir levels
Bibliography
Defines general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications.
| Committee |
PSE/17/-/6
|
| DevelopmentNote |
Supersedes 99/714230 DC. (01/2004)
|
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN ISO 10438-1:2007 | Identical |
| DIN EN ISO 10438-1:2010-08 | Identical |
| NS EN ISO 10438-1 : 2ED 2007 | Identical |
| NEN EN ISO 10438-1 : 2008 | Identical |
| ISO 10438-1:2007 | Identical |
| NBN EN ISO 10438-1 : 2008 | Identical |
| API 614 : 2008 | Identical |
| UNI EN ISO 10438-1 : 2009 | Identical |
| EN ISO 10438-1:2007 | Identical |
| SN EN ISO 10438-1:2008 | Identical |
| NF EN ISO 10438-1 : 2009 | Identical |
| ISO 10438-1:2003 | Identical |
| EN ISO 10438-1:2003 | Identical |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| API 661 : 2015 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
| ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| ASTM A 181/A181M : 2014 : REDLINE | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
| ISO 16812:2007 | Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers |
| API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
| NAS1638:2011 | CLEANLINESS REQUIREMENTS OF PARTS USED IN HYDRAULIC SYSTEMS |
| API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| NEMA 250 : 2014 | ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM) |
| ASME B31.3:2016 | PROCESS PIPING |
| API std 602 : 2015 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| API STD 600 : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| ISO 10438-3:2007 | Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems |
| ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
| API 578 : 2010 | GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| API 617 : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| API 660 : 2015 | SHELL-AND-TUBE HEAT EXCHANGERS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| API 551 : 2016 | PROCESS MEASUREMENT |
| API 526 : 2017 | FLANGED STEEL PRESSURE-RELIEF VALVES |
| ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ISO 10438-4:2007 | Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support systems |
| API 686 : 2009 | RECOMMENDED PRACTICE FOR MACHINERY INSTALLATION AND INSTALLATION DESIGN |
| SAE AS 4059F : 2013 | AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
| ISO 13706:2011 | Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers |
| TEMA STANDARDS : 9ED 2007 | STANDARDS OF THE TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION |
| ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
| API 594 : 2017 | CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| ISA 18.1 : 1979 | ANNUNCIATOR SEQUENCES AND SPECIFICATIONS |
| CEN/TR 14549:2004 | Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive |
| API 520-2 : 2015 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
| ISO 10438-2:2007 | Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.