BS EN ISO 12215-1:2000
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate
Hardcopy , PDF
03-11-2018
English
15-02-2001
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for material properties of
small craft
Annex ZA (normative) Normative references to
international publications with their
relevant European publications
Applies to thermosetting resins and glass-fibre reinforcement used in the construction of small craft with a length of the hull (LH) not exceeding 24 m, in compliance with ISO 8666. It specifies the minimum requirements for material properties of glass reinforcement and resin matrix and the reference laminate made thereof.
| Committee |
GME/33
|
| DevelopmentNote |
Supersedes 97/710297 DC (06/2005)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
Sets requirements for materials and handling for small craft hull construction.
| Standards | Relationship |
| EN ISO 12215-1:2000 | Identical |
| DIN EN ISO 12215-1:2001-02 | Identical |
| ONORM EN ISO 12215-1 : 2001 | Identical |
| UNE-EN ISO 12215-1:2001 | Identical |
| NEN EN ISO 12215-1 : 2000 | Identical |
| SN EN ISO 12215-1 : 2001 | Identical |
| ISO 12215-1:2000 | Identical |
| UNI EN ISO 12215-1 : 2002 | Identical |
| NF EN ISO 12215-1 : 2001 | Identical |
| I.S. EN ISO 12215-1:2000 | Identical |
| NS EN ISO 12215-1 : 1ED 2000 | Identical |
| NBN EN ISO 12215-1 : 2001 | Identical |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| ISO 75-1:2013 | Plastics Determination of temperature of deflection under load Part 1: General test method |
| ISO 2535:2001 | Plastics Unsaturated-polyester resins Measurement of gel time at ambient temperature |
| EN ISO 62:2008 | Plastics - Determination of water absorption (ISO 62:2008) |
| ISO 3521:1997 | Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage |
| ISO 527-4:1997 | Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| EN ISO 527-4:1997 | Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997) |
| ISO 2884-1:1999 | Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear |
| EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
| EN ISO 75-1:2013 | Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013) |
| EN ISO 14130:1997 | Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method (ISO 14130:1997) |
| ISO 3374:2000 | Reinforcement products Mats and fabrics Determination of mass per unit area |
| ISO 8666:2016 | Small craft Principal data |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| EN ISO 1889:2009 | Reinforcement yarns - Determination of linear density (ISO 1889:2009) |
| EN ISO 75-2:2013 | Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
| ISO 2555:1989 | Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method |
| EN ISO 3521:1999 | Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997) |
| ISO 2078:1993 | Textile glass Yarns Designation |
| ISO 1675:1985 | Plastics — Liquid resins — Determination of density by the pyknometer method |
| ISO 1887:2014 | Textile glass Determination of combustible-matter content |
| ISO 1889:2009 | Reinforcement yarns Determination of linear density |
| ISO 62:2008 | Plastics Determination of water absorption |
| ISO 14130:1997 | Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
| ISO 4901:2011 | Reinforced plastics based on unsaturated-polyester resins Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography |
| DIN 16945:1989-03 | REACTION RESINS - REACTANTS AND REACTION MOULDING MATERIALS - TEST METHODS |
| ISO 178:2010 | Plastics Determination of flexural properties |
| EN ISO 2535:2002 | Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001) |
| ISO 3344:1997 | Reinforcement products — Determination of moisture content |
| EN ISO 3344:1997 | Reinforcement products - Determination of moisture content (ISO 3344:1997) |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.