• BS PD IEC TS 62850 : 2013

    Current The latest, up-to-date edition.

    SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - GENERAL REQUIREMENTS FOR EQUIPMENT INTENDED TO BE USED IN EDUCATIONAL ESTABLISHMENTS BY CHILDREN

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2013

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope and object
    2 Normative references
    3 Terms and definitions
    4 Tests
    5 Marking and documentation
    6 Protection against electric shock
    7 Protection against mechanical HAZARDS
    8 Resistance to mechanical stresses
    9 Protection against the spread of fire
    10 Equipment temperature limits and resistance to heat
    11 Protection against HAZARDS from fluids
    12 Protection against radiation, including laser sources, and
       against sonic and ultrasonic pressure
    13 Protection against liberated gases and substances, explosion
       and implosion
    14 Components and subassemblies
    15 Protection by interlocks
    16 HAZARDS resulting from application
    17 RISK assessment
    Annex A (normative) - Measuring circuits for touch current
    Annex B (normative) - Standard test fingers
    Annex C (normative) - Measurement of CLEARANCES and
            CREEPAGE DISTANCES
    Annex D (normative) - Parts between which insulation requirements
            are specified
    Annex E (informative) - Guideline for reduction of POLLUTION
            DEGREES
    Annex F (normative) - ROUTINE TESTS
    Annex G (informative) - Leakage and rupture from fluids under
            pressure
    Annex H (normative) - Qualification of conformal coatings for
            protection against POLLUTION
    Annex I (informative) - Line-to-neutral voltages for common
            MAINS supply systems
    Annex J (informative) - RISK assessment
    Annex K (normative) - Insulation requirements not covered by 6.7
    Annex L (informative) - Index of defined terms
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines general safety requirements for the following types of equipment and their accessories intended to be used in educational establishments by persons between the age of 3 years and the age of 16 years under the supervision of the RESPONSIBLE BODY.

    General Product Information - (Show below) - (Hide below)

    Committee EPL/66
    Development Note Supersedes BS DD61010-100(2007) & 09/30199945 DC. (04/2013)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
    IEC 60112:2003+AMD1:2009 CSV METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
    IEC 61672-2:2013+AMD1:2017 CSV Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
    IEC 60245-1:2003+AMD1:2007 CSV Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
    EN 894-3:2000+A1:2008 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
    UL 1439 : 5 TESTS FOR SHARPNESS OF EDGES ON EQUIPMENT
    IEC 60335-2-24:2010+AMD1:2012+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
    EN 894-2:1997+A1:2008 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS
    UL 2556 : 4 WIRE AND CABLE TEST METHODS
    IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
    UL 746E : 6 POLYMERIC MATERIALS - INDUSTRIAL LAMINATES, FILAMENT WOUND TUBING, VULCANIZED FIBRE, AND MATERIALS USED IN PRINTED-WIRING BOARDS
    IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
    ISO 9614-1:1993 Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points
    ISO 13732-1:2006 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces
    IEC GUIDE 117:2010 Electrotechnical equipment - Temperatures of touchable hot surfaces
    IEC TR 62471-2:2009 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
    EN 349:1993+A1:2008 SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
    ISO 14738:2002 Safety of machinery Anthropometric requirements for the design of workstations at machinery
    ISO 8124-1:2014 Safety of toys Part 1: Safety aspects related to mechanical and physical properties
    IEC 60332-2-2:2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 2-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE SMALL INSULATED WIRE OR CABLE -PROCEDURE FOR DIFFUSION FLAME
    IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
    ANSI B11 TR3 : 2000 RISK ASSESSMENT AND RISK REDUCTION - A GUIDE TO ESTIMATE, EVALUATE AND REDUCE RISKS ASSOCIATED WITH MACHINE TOOLS
    IEC 61243-3:2014 Live working - Voltage detectors - Part 3: Two-pole low-voltage type
    UL 471 : 2010-11 COMMERCIAL REFRIGERATORS AND FREEZERS
    IEC 60027-1:1992 Letters symbols to be used in electrical technology - Part 1: General
    IEC 61010-2-030:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for equipment having testing or measuring circuits
    ISO 14121-1:2007 Safety of machinery Risk assessment Part 1: Principles
    IEC 60227-1:2007 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
    IEC 60332-1-2:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame
    IEC 60085:2007 ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION
    IEC 61180-2:1994 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - PART 2: TEST EQUIPMENT
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    ISO 361:1975 Basic ionizing radiation symbol
    ISO/IEC Guide 50:2014 Safety aspects Guidelines for child safety in standards and other specifications
    ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
    IEC 60447:2004 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
    EN 71-1 : 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
    SEMI S10 : 2015E SAFETY GUIDELINE FOR RISK ASSESSMENT AND RISK EVALUATION PROCESS
    2006/25/EC : 2006 AMD 3 2013 DIRECTIVE 2006/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 5 APRIL 2006 ON THE MINIMUM HEALTH AND SAFETY REQUIREMENTS REGARDING THE EXPOSURE OF WORKERS TO RISKS ARISING FROM PHYSICAL AGENTS (ARTIFICIAL OPTICAL RADIATION) (19TH INDIVIDUAL DIRECTIVE WITHIN THE MEANING OF ARTICLE 16(1) OF DIRECTIVE 89/391/EEC)
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 60364-4-44:2007+AMD1:2015 CSV Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
    IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
    IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
    IEC 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
    ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
    IEC 62471:2006 Photobiological safety of lamps and lamp systems
    ISO 13854:2017 Safety of machinery Minimum gaps to avoid crushing of parts of the human body
    ISO 306:2013 Plastics Thermoplastic materials Determination of Vicat softening temperature (VST)
    IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    IEC 60664-3:2016 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
    IEC 61010-031:2015 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
    IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    IEC 60695-10-2:2014 FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
    IEC 61180-1:1992 High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements
    ISO 14971:2007 Medical devices Application of risk management to medical devices
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    IEC 62598:2011 NUCLEAR INSTRUMENTATION - CONSTRUCTIONAL REQUIREMENTS AND CLASSIFICATION OF RADIOMETRIC GAUGES
    IEC 61032:1997 Protection of persons and equipment by enclosures - Probes for verification
    ASTM F 963 : 2017 : REDLINE Standard Consumer Safety Specification for Toy Safety
    IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
    IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
    IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 62368-1:2014 Audio/video, information and communication technology equipment - Part 1: Safety requirements
    IEC 60990:2016 Methods of measurement of touch current and protective conductor current
    IEC 60335-2-89:2010+AMD1:2012+AMD2:2015 CSV Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
    IEC 60799:1998 ELECTRICAL ACCESSORIES - CORD SETS AND INTERCONNECTION CORD SETS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective