• Shopping Cart
    There are no items in your cart

CEN/TR 16110:2010

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste

Withdrawn date

07-02-2024

Published date

15-12-2010

Sorry this product is not available in your region.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General information provided by the content of the
  guidance document
5 Sampling, transport, storage and sample preparation
6 Leaching procedures for ecotoxicological testing
7 Ecotoxicological testing
8 Selected field of applications
Bibliography

Ecotoxicity tests can be applied to wastes to identify their potential hazardous properties with respect to the environment or to assess the risk related to a site-specific exposure scenario. This document provides guidance for the selection and use of ecotoxicity tests for both applications. This document focuses on the following selected field of applications:a)Basic ecotoxicological characterization;b)Site-specific exposure scenario;c)Landfill management:1)monitoring of leachates;2)mineral waste going to non-controlled landfill sites.d)Re-use of waste:1)use of sludge in agriculture;2)use of mineral waste in road construction.The user should be aware that other fields of application can also be covered by ecotoxicological testing not being in the scope of the document. The ecotoxicological assessment of waste within other scenarios might need the development of other test strategies. Depending on the waste type and the assessment goal, relevant criteria are described for the selection of a test strategy and the suitable ecotoxicity test(s).This document also provides guidance for individual ecotoxicity test protocols to meet the specific demands of waste testing (e.g. limitations, test design, confounding factors).The tests recommended represent a minimum test battery that may be accomplished by additional tests or even be replaced by others according to the waste, the intended use or protection goal envisaged.

Committee
CEN/TC 444
DocumentType
Technical Report
PublisherName
Comite Europeen de Normalisation
Status
Withdrawn

CEN/TR 17105:2017 Construction products - Assessment of release of dangerous substances - Guidance on the use of ecotoxicity tests applied to construction products
PD CEN/TR 17105:2017 Construction products. Assessment of release of dangerous substances. Guidance on the use of ecotoxicity tests applied to construction products
UNI EN 16457 : 2014 CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT
I.S. EN 16457:2014 CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT
UNE-EN 16457:2014 Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report
S.R. CEN/TR 17105:2017 CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - GUIDANCE ON THE USE OF ECOTOXICITY TESTS APPLIED TO CONSTRUCTION PRODUCTS
12/30263896 DC : 0 BS EN 16457 - CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT
DIN EN 16457:2014-07 CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT
EN 16457:2014 Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report
DIN EN 16457 E : 2014 CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT
BS EN 16457:2014 Characterization of waste. Framework for the preparation and application of a testing programme. Objectives, planning and report

EN ISO 11348-3:2008 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria (ISO 11348-3:2007)
CEN/TR 15310-2:2006 Characterization of waste - Sampling of waste materials - Part 2: Guidance on sampling techniques
ISO/TS 21268-3:2007 Soil quality Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 3: Up-flow percolation test
EN 12457-2:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
ISO 11074:2015 Soil quality — Vocabulary
ISO 11348-1:2007 Water quality Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) Part 1: Method using freshly prepared bacteria
CEN/TS 14429:2005 Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with initial acid/base addition
ISO 20079:2005 Water quality — Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) — Duckweed growth inhibition test
ISO 11269-2:2012 Soil quality — Determination of the effects of pollutants on soil flora — Part 2: Effects of contaminated soil on the emergence and early growth of higher plants
ISO 11348-2:2007 Water quality Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) Part 2: Method using liquid-dried bacteria
ISO 20665:2008 Water quality — Determination of chronic toxicity to Ceriodaphnia dubia
ISO 8692:2012 Water quality — Fresh water algal growth inhibition test with unicellular green algae
CEN/TR 13097:2010 Characterization of sludges - Good practice for sludge utilisation in agriculture
ISO/TS 21268-1:2007 Soil quality Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter
EN ISO 20079:2006 Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test (ISO 20079:2005)
ISO/TS 21268-4:2007 Soil quality Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 4: Influence of pH on leaching with initial acid/base addition
ISO 6341:2012 Water quality — Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) — Acute toxicity test
CEN/TR 15310-1:2006 Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions
ISO 16387:2014 Soil quality — Effects of contaminants on Enchytraeidae (Enchytraeus sp.) — Determination of effects on reproduction
ISO 18772:2008 Soil quality — Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials
EN ISO 11348-2:2008 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria (ISO 11348-2:2007)
CEN ISO/TS 21268-3:2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 3: Up-flow percolation test (ISO/TS 21268-3:2007)
ISO 17616:2008 Soil quality Guidance on the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil materials
EN 12457-4:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
ISO 11267:2014 Soil quality — Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants
CEN ISO/TS 21268-2:2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter (ISO/TS 21268-2:2007)
CEN/TR 15584:2007 Characterisation of sludges - Guide to risk assessment especially in relation to use and disposal of sludges
ISO 14238:2012 Soil quality — Biological methods — Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes
ISO 5667-3:2012 Water quality Sampling Part 3: Preservation and handling of water samples
EN ISO 11348-1:2008 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria (ISO 11348-1:2007)
ISO 15799:2003 Soil quality Guidance on the ecotoxicological characterization of soils and soil materials
ISO 11348-3:2007 Water quality Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) Part 3: Method using freeze-dried bacteria
ISO/TS 21268-2:2007 Soil quality Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter
EN 12457-1:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
ISO 11268-2:2012 Soil quality — Effects of pollutants on earthworms — Part 2: Determination of effects on reproduction of Eisenia fetida/Eisenia andrei
ISO 10390:2005 Soil quality Determination of pH
EN 12920:2006+A1:2008 Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions
EN ISO 8692:2012 Water quality - Fresh water algal growth inhibition test with unicellular green algae (ISO 8692:2012)
CEN ISO/TS 21268-1:2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter (ISO/TS 21268-1:2007)
EN 12457-3:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
ISO 5667-16:2017 Water quality — Sampling — Part 16: Guidance on biotesting of samples
CEN ISO/TS 21268-4:2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 4: Influence of pH on leaching with initial acid/base addition (ISO/TS 21268-4:2007)
CEN/TS 14405 : 2004 CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS)
CEN/TR 15310-3:2006 Characterization of waste - Sampling of waste materials - Part 3: Guidance on procedures for sub-sampling in the field
EN 14899:2005 Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan
CEN/TR 15310-4:2006 Characterization of waste - Sampling of waste materials - Part 4: Guidance on procedures for sample packaging, storage, preservation, transport and delivery
ISO 10706:2000 Water quality Determination of long term toxicity of substances to Daphnia magna Straus (Cladocera, Crustacea)
EN ISO 6341:2012 Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO 6341:2012)
CEN/TR 15310-5:2006 Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.