CSA ISO 19904-1 : 2007 : R2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
Hardcopy , PDF
26-09-2020
English, French
01-01-2017
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Overall considerations
6 Basic design requirements
7 Actions and action effects
8 Global analysis
9 Structural considerations
10 Fatigue analysis and design
11 Monohulls
12 Semi-submersibles
13 Spars
14 Conversion and reuse
15 Hydrostatic stability and compartmentation
16 Mechanical systems
17 Stationkeeping systems
18 In-service inspection, monitoring and maintenance
Annex A (informative) - Additional information and
guidance
Bibliography
Provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions: - production; - storage and/or offloading; - drilling and production; - production, storage and offloading; - drilling, production, storage and offloading.
| DocumentType |
Standard
|
| Pages |
204
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 19904-1:2006 | Identical |
| BS 7448-1:1991 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials |
| BV NR494 : R02 | RULES FOR THE CLASSIFICATION OF OFFSHORE LOADING & OFFLOADING BUOYS |
| ISO 17643:2015 | Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis |
| ISO 19901-2:2017 | Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria |
| ISO 19900:2013 | Petroleum and natural gas industries General requirements for offshore structures |
| BV NR384 : R01 | HULL STRUCTURE DESIGN - ALUMINIUM ALLOY SHIPS (CHAPTER 12) |
| ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
| ISO 9089:1989 | Marine structures Mobile offshore units Anchor winches |
| BV NR184 : R00 | RULES FOR THE CLASSIFICATION AND CERTIFICATION OF LIFTING APPLIANCES OF SHIPS AND OFFSHORE UNITS |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| BV NI171 : R00 | SLOSHING ON BOARD SHIP PARTIAL FILLING STUDY |
| ISO 10420:1994 | Petroleum and natural gas industries — Flexible pipe systems for subsea and marine riser applications |
| API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
| BS 8010-3:1993 | Code of practice for pipelines Pipelines subsea: design, construction and installation |
| API BULL 2V : 2004 | DESIGN OF FLAT PLATE STRUCTURES |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| ISO 19901-7:2013 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units |
| ISO 6361-1:2011 | Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| ISO 2394:2015 | General principles on reliability for structures |
| ISO 17636:2003 | Non-destructive testing of welds Radiographic testing of fusion-welded joints |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| EN 12473:2014 | General principles of cathodic protection in seawater |
| ISO 19903:2006 | Petroleum and natural gas industries Fixed concrete offshore structures |
| NACE RP 01 76 : 2003 | CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| CFR 49(PTS186-199) : 0 | TRANSPORTATION |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| BV NI299 : R00 | GUIDELINES ON DOCUMENTS TO BE SUBMITTED FOR STABILITY STUDY |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| ISO 13535:2000 | Petroleum and natural gas industries Drilling and production equipment Hoisting equipment |
| API 8C : 2012 | DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2) |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| BV NR423 : R00 | CORROSION PROTECTION OF STEEL OFFSHORE UNITS AND INSTALLATIONS |
| BV NR497 : R00 | HULL STRUCTURE OF PRODUCTION, STORAGE AND OFFLOADING SURFACE UNITS |
| API RP 16Q : 2017 | DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS |
| ISO 2103:1986 | Loads due to use and occupancy in residential and public buildings |
| BV NR446 : R00 | RULES FOR THE CLASSIFICATION OF OFFSHORE UNITS - INTRODUCTION |
| API RP 17B : 2014 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
| ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
| BS 7448-2:1997 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials |
| BV NI409 : R00 | GUIDELINES FOR CORROSION PROTECTION OF SEAWATER BALLAST TANKS AND HOLD SPACES |
| API 2C : 2012 | OFFSHORE PEDESTAL-MOUNTED CRANES |
| API BULL 2U : 2004 | BULLETIN ON STABILITY DESIGN OF CYLINDRICAL SHELLS |
| BV NI393 : R01 | FATIGUE STRENGTH OF WELDED SHIP STRUCTURES |
| BV NR460 : R00 | SAFETY FEATURES OF OFFSHORE UNITS AND INSTALLATIONS |
| EN 13173:2001 | Cathodic protection for steel offshore floating structures |
| API 14G : 2007 | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| ISO 19901-5:2016 | Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and construction |
| BV NR445 : 2016 | RULES FOR THE CLASSIFICATION OF OFFSHORE UNITS (FULL PACKAGE) |
| ISO 19901-1:2015 | Petroleum and natural gas industries Specific requirements for offshore structures Part 1: Metocean design and operating considerations |
| ISO 13628-5:2009 | Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals |
| BV NI165 : R00 | ULTRASONIC TESTING OF HULL BUTT WELDS |
| ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
| API 2FPS : 2011 | PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS |
| PREN 13852 : DRAFT 2000 | CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| ISO 17638:2016 | Non-destructive testing of welds Magnetic particle testing |
| API 2D : 2014 | OPERATION AND MAINTENANCE OF OFFSHORE CRANES |
| ISO 76:2006 | Rolling bearings Static load ratings |
| API 17D : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
| API 8A : 1997 | SPECIFICATION FOR DRILLING AND PRODUCTION HOISTING EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.