DIN EN 12420:2014-09
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Copper and copper alloys - Forgings
Hardcopy , PDF
01-12-2024
German, English
01-09-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Nationales Vorwort
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Bezeichnungen
5 Bestellangaben
6 Anforderungen
7 Probenentnahme
8 Prüfverfahren
9 Konformitätserklärung und Prüfbescheinigung
10 Kennzeichnung, Etikettierung, Verpackung
Anhang A (informativ) - Empfohlene Konstruktionsleitfäden
Anhang B (informativ) - Zugeigenschaften
Anhang ZA (informativ) - Zusammenhang zwischen dieser
Europäischen Norm und den grundlegenden
Anforderungen der EU-Richtlinie 97/23/EG über
Druckgeräte (DGRL)
Literaturhinweise
This standard is included in DIN Handbook 456/3.
| DevelopmentNote |
Supersedes DIN 17673-1, DIN 17673-2, DIN 17673-3, DIN 17673-4, DIN 17678-1, DIN 17678-2, DIN 17678-3, DIN 17678-4 and DIN 17933-70 (09/1999)
|
| DocumentType |
Standard
|
| Pages |
61
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI EN 12420 : 2014 | Identical |
| EN 12420:2014 | Identical |
| NS EN 12420 : 2014 | Identical |
| UNE-EN 12420:2015 | Identical |
| NBN EN 12420 : 2014 | Identical |
| I.S. EN 12420:2014 | Identical |
| SN EN 12420:2014 | Identical |
| NEN EN 12420 : 2014 | Identical |
| NF EN 12420 : 2014 | Identical |
| BS EN 12420:2014 | Identical |
| DKI I 008 : 2012 | |
| BWB TL 4210-0028 : 4ED 2000 | FOAM PROPORTIONER, 200 L/MIN AND 400 L/MIN |
| DIN 14461-3:2016-10 | DELIVERY VALVE INSTALLATIONS FOR FIREFIGHTING PURPOSES - PART 3: FIRE HOSE VALVES FOR NOMINAL PRESSURE PN 16 |
| DIN 16272:2004-07 | PN 250 and PN 400 valves with shut-off test connection for pressure gauges |
| DIN HDBK 456/3 : 2ED 2015 | KUPFER 3 - STANGEN, DRAEHTE, PROFILE, GUSSSTUECKE UND SCHMIEDESTUECKE |
| DIN 16263:2004-07 | PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges |
| BWB TL 8345-0047 : 1ED 2006 | |
| DIN 16262:2004-07 | PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges |
| DIN 3387-1:2008-11 | Separable unthreaded pipe connections for metal gas pipes - Part 1: Connections for pipes with smooth ends |
| DIN 3509:2010-06 | Valves for potable water supply in buildings - Draw-off taps (PN 10) - Requirements and tests |
| DIN 3859-1:2005-09 | Compression couplings - Part 1: Technical delivery conditions |
| DIN HDBK 457 : 2ED 2004 | KUPFER 2 - STANGEN, DRAEHTE, PROFILE, GUSSSTUECKE UND SCHMIEDESTUECKE |
| BWB TL 4730-0037 : 1ED 2006 | |
| DIN 86211:2011-02 | Fire valves for PN 16 with fire hose couplings Type C or Type B and with flange connection |
| DIN 16271:2004-07 | PN 250 and PN 400 valves with test connection for pressure gauges |
| DIN 16270:2004-07 | PN 250 and PN 400 valves without test connection for pressure gauges |
| DIN 14303:2013-02 | Aluminium alloy delivery coupling type B with nominal pressure PN 16 |
| DIN 81249-2:2013-05 | CORROSION OF METALS IN SEA WATER AND SEA ATMOSPHERE - PART 2: FREE CORROSION IN SEA WATER |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 14977:2006 | Copper and copper alloys - Detection of tensile stress - 5 % ammonia test |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
| EN 1976:2012 | Copper and copper alloys - Cast unwrought copper products |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 6509:1981 | Corrosion of metals and alloys Determination of dezincification resistance of brass |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN ISO 6509:1995 | Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.