DIN EN 14080:2013-09
Current
The latest, up-to-date edition.
TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
Hardcopy , PDF
English, German
01-01-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Requirements for glued laminated products
6 Evaluation of conformity
7 Marking and labelling
Annex A (normative) - Release of Formaldehyde
Annex B (normative) - Additional test methods and requirements
for adhesives
Annex C (normative) - Delamination test of glue lines
Annex D (normative) - Shear test of glue lines
Annex E (normative) - Tests with laminations with or without
finger joints (including compliance criteria)
Annex F (normative) - Bending tests with glued laminated timber,
glued solid timber and glulam with large finger joints
(including compliance criteria)
Annex G (normative) - Measurement of moisture content
Annex H (normative) - Equipment
Annex I (normative) - Minimum production requirements
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Directive
Bibliography
This standard is included in DIN Handbook 80.
| DevelopmentNote |
Supersedes DIN EN 386, DIN EN 387, DIN EN 390, DIN EN 391, DIN EN 392 and DIN EN 1194. (10/2013) Together with DIN EN 15497, it supersedes DIN EN 385. (09/2014)
|
| DocumentType |
Standard
|
| Pages |
107
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 14080 : 2013 | Identical |
| NEN EN 14080 : 2013 | Identical |
| NBN EN 14080 : 2013 | Identical |
| SN EN 14080 : 2013 | Identical |
| UNE-EN 14080:2013 | Identical |
| NS EN 14080 : 2013 + NA 2016 | Identical |
| BS EN 14080:2013 | Identical |
| UNI EN 14080 : 2013 | Identical |
| EN 14080:2013 | Identical |
| I.S. EN 14080:2013 | Identical |
| DIN 18203-3:2008-08 | TOLERANCES IN BUILDING CONSTRUCTIONS - PART 3: BUILDING COMPONENTS OF WOOD AND DERIVED TIMBER PRODUCTS |
| DIN HDBK 80 : 11ED 2017 | ZIMMER- UND HOLZBAUARBEITEN VOB/STLB-BAU - VOB TEIL C: ATV DIN 18299, ATV DIN 18334 |
| EN 13183-3:2005 | Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method |
| PREN 302-4 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
| EN 302-5:2013 | Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions |
| PREN 302-1 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
| PREN 302-3 : DRAFT 2015 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
| EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 15416-3:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| PREN 301 : DRAFT 2015 | ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| EN 14081-4:2009 | Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 13556:2003 | Round and sawn timber - Nomenclature of timbers used in Europe |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| PREN 302-6 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| PREN 15497 : DRAFT 2011 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 350-2:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
| EN 14081-1:2016 | Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
| EN 386:2001 | Glued laminated timber - Performance requirements and minimum production requirements |
| EN 408:2010+A1:2012 | Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties |
| EN 15425:2017 | Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
| EN 338:2016 | Structural timber - Strength classes |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| PREN 16351 : DRAFT 2011 | TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| EN 14358:2016 | Timber structures - Calculation and verification of characteristic values |
| PREN 302-2 : DRAFT 2015 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 2: DETERMINATION OF RESISTANCE TO DELAMINATION |
| EN 15228:2009 | Structural timber - Structural timber preservative treated against biological attack |
| EN 384:2016 | Structural timber - Determination of characteristic values of mechanical properties and density |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.