• DIN EN 14879-5 E : 2007

    Current The latest, up-to-date edition.

    ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 5: LININGS ON CONCRETE COMPONENTS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2007

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Concepts and selection criteria
       4.1 Surface protection types and systems
       4.2 Selection criteria
       4.3 Load profile
    5 Concepts
       5.1 Lining materials
       5.2 Lining materials manufacturer
       5.3 Applicator
    6 Materials
       6.1 Materials for bonded linings
       6.2 Materials for mechanically fixed linings
       6.3 Materials for loose linings
    7 Application
       7.1 Bonded linings
       7.2 Mechanically fixed linings
       7.3 Loose linings
    8 Designations
    9 Testing
       9.1 General
       9.2 Suitability testing
       9.3 Checking the substrate
       9.4 Receiving of lining materials
       9.5 In-process testing of lining
       9.6 Checking the completed lining
       9.7 Tests during the application works
       9.8 Inspection report
    10 Suitability verification and tests
       10.1 Requirements
       10.2 Tests
    Annex A (informative)
    Annex B (informative) - Selection criteria for surface protection
                            systems
            B.1 Load profiles and suitable surface protection systems
                for floors and walls
            B.2 Load profiles and suitable surface protection systems for
                secondary containments
            B.3 Load profiles and suitable protection for production plant
                floors
            B.4 Load profiles and suitable protection for collecting basins,
                gutters, channels, pipes etc.
            B.5 Load profiles and suitable protection for containers
    Annex C (informative) - Sample form for acceptance inspection report
    Annex D (normative) - Overview of verification of suitability for
                            linings
    Annex E (normative) - Test fluid groups for verification of suitability for
                            material/media combinations
    Annex F (normative) - Media lists for elastomer linings
    Annex G (normative) - Testing the dissipation capability
            G.1 General
                G.1.1 Dissipation resistance
                G.1.2 Ground dissipating resistance
            G.2 Testing the dissipation resistance of test samples
                G.2.1 Instruments
                G.2.2 Test procedure
                G.2.3 Test report
            G.3 Measuring the ground dissipation resistance on the
                laid surface protection system
                G.3.1 Instruments
                G.3.2 Preparation
                G.3.3 Test procedure
                G.3.4 Test report
    Annex H (informative) - Check list and sample form for inspection
                            schedule
    Annex I (informative) - A-deviations
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines the requirements for and methods of testing of organic linings which are applied to concrete process engineering equipment that will come in contact with aggressive chemical substances (liquids, solids and gases).

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes DIN 28052-4 E. (01/2008)
    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 75-1:2013 Plastics Determination of temperature of deflection under load Part 1: General test method
    ISO 6721-2:2008 Plastics Determination of dynamic mechanical properties Part 2: Torsion-pendulum method
    DVS 2212-2:1992-05 Examination of plastic welders - Examination group II - Hot gas extrusion welding
    ISO 813:2016 Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method
    EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods
    DIN IEC 60093 : 1993 METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
    EN 14879-1:2005 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
    DVS 2212-1:2015-12 Qualifi cation testing of plastics welders - Qualification Test Groups I and II
    EN ISO 6721-2:2008 Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:2008)
    EN 14879-3:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
    ISO 23529:2016 Rubber General procedures for preparing and conditioning test pieces for physical test methods
    EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
    EN 977:1997 Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids
    EN ISO 75-1:2013 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
    EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
    DIN IEC 60167 : 1993 METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; INSULATION RESISTANCE OF SOLID MATERIALS
    PREN 14879-6 : DRAFT 2009 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
    ISO 846:1997 Plastics Evaluation of the action of microorganisms
    EN ISO 22088-4:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006)
    IEC 60167:1964 Methods of test for the determination of the insulation resistance of solid insulating materials
    ISO 15013:2007 Plastics Extruded sheets of polypropylene (PP) Requirements and test methods
    IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
    EN ISO 14632 : 1998 EXTRUDED SHEETS OF POLYETHYLENE (PE-HD) - REQUIREMENTS AND TEST METHODS
    ISO 14632:1998 Extruded sheets of polyethylene (PE-HD) Requirements and test methods
    ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
    ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
    EN 14879-4:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
    EN 10204:2004 Metallic products - Types of inspection documents
    EN ISO 846 : 1997 PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS
    ISO 22088-4:2006 Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method
    EN 13067:2012 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
    ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
    ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
    EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
    EN ISO 15013:2007 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007)
    EN ISO 1133:2005 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS
    EN 1766:2017 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
    ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
    ISO 178:2010 Plastics Determination of flexural properties
    EN ISO 527-3:1995/AC:2002 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
    ISO 1133:2005 Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
    EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
    EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
    EN 13813:2002 Screed material and floor screeds - Screed material - Properties and requirements
    ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
    ASTM D 1693 : 2015 : REDLINE Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective