DIN EN 877:2010-01
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008)
Available format(s)
Hardcopy , PDF
Language(s)
English, German
Published date
01-01-2010
Superseded date
28-09-2022
Superseded by
€169.91
Excluding VAT
| DevelopmentNote |
Supersedes DIN 19522-2, DIN EN 877-1 and DIN EN 877-2. Together with DIN 19522 supersedes DIN 19522-1. (03/2000) DRAFT 2012 issued in January 2012 is now cancelled. (06/2016)
|
| DocumentType |
Standard
|
| Pages |
59
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 877 : 1999 AMD 1 2006 | Identical |
| NS EN 877 : 1999 AC 2008 | Identical |
| NBN EN 877 : 1999 COR 2008 | Identical |
| NEN EN 877 : 1999 AMD 1/C1 2008 | Identical |
| BS EN 877 : 1999 | Identical |
| I.S. EN 877:2000 | Identical |
| ONORM EN 877 : 2008 | Identical |
| UNE-EN 877:2000 | Identical |
| DIN 1986-4:2011-12 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 4: FIELDS OF APPLICATION OF SEWAGE PIPES AND FITTINGS OF DIFFERENT MATERIALS |
| DIN HDBK 50 : 9ED 2000 | ABWASSERTECHNIK 2 - ROHRE UND FORMSTUECKE FUER DIE GEBAEUDEENTWAESSERUNG |
| DIN 1986-4:2019-08 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 4: FIELDS OF APPLICATION OF SEWAGE PIPES AND FITTINGS OF DIFFERENT MATERIALS |
| DIN HDBK 13-2 : 11ED 2017 | ABWASSERTECHNIK 2 - ROHRE UND FORMSTUECKE FUER DIE GEBAEUDEENTWAESSERUNG |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 7724-1:1984 | Paints and varnishes — Colorimetry — Part 1: Principles |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| EN 605 : 1992 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
| ISO 1716:2010 | Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value) |
| EN 20898-1 : 1991 | MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS AND STUDS |
| EN 598:2007+A1:2009 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
| DIN 19522:2010-12 | Cast iron drainage pipes and fittings without socket (SML) |
| ISO 2808:2007 | Paints and varnishes — Determination of film thickness |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 45011:1998 | General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996) |
| ISO 7724-2:1984 | Paints and varnishes — Colorimetry — Part 2: Colour measurement |
| ISO 11925-2:2010 | Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test |
| DIN EN ISO 4628-2:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING (ISO 4628-2:2016) |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| ISO 6708:1995 | Pipework components — Definition and selection of DN (nominal size) |
| EN 20898-2 : 1993 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 45011 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
| DIN ISO 1817:2016-11 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF THE EFFECT OF LIQUIDS (ISO 1817:2015) |
| ISO/IEC 17011:2004 | Conformity assessment — General requirements for accreditation bodies accrediting conformity assessment bodies |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| ISO 4628-3:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
| ISO 7253:1996 | Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
| EN 476:2011 | General requirements for components used in drains and sewers |
| ISO 7724-3:1984 | Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences |
| EN 1366-3:2009 | Fire resistance tests for service installations - Part 3: Penetration seals |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
| EN 14366:2004 | Laboratory measurement of noise from waste water installations |
| ISO 185:2005 | Grey cast irons — Classification |
| EN 10003-1 : 1994 | METALLIC MATERIALS - BRINELL HARDNESS TEST - TEST METHOD |
| PREN 1366-3 : DRAFT 1993 | FIRE TESTS FOR BUILDING ELEMENTS AND COMPONENTS - FIRE RESISTANCE TESTING OF SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS |
| ISO 2409:2013 | Paints and varnishes — Cross-cut test |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| DIN 6174:2007-10 | COLORIMETRIC EVALUATION OF COLOUR COORDINATES AND COLOUR DIFFERENCES ACCORDING TO THE APPROXIMATELY UNIFORM |
| ISO 4628-2:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic — Determination of the effect of liquids |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| DIN 5033-2:1992-05 | COLORIMETRY, STANDARD COLORIMETRIC SYSTEMS |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.