DIN EN ISO 11553-2:2009-03
Current
The latest, up-to-date edition.
SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
Hardcopy , PDF
English
01-01-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Gefährdungen
4.1 Inhärente Gefährdungen
4.2 Gefährdungen durch externe Einflüsse
(Störungen)
4.3 Weitere Gefährdungen bei Anwendung
von handgeführten Laserbearbeitungsgeräten
4.3.1 Enge Räume
4.3.2 Arbeiten auf hochgelegenen Arbeitsplätzen
4.3.3 Umwelteinflüsse
5 Sicherheitsanforderungen und -massnahmen
5.1 Allgemeine Anforderungen
5.2 Risikobeurteilung
5.3 Ausführung von korrigierenden Massnahmen
5.3.1 Allgemeine Anforderungen
5.3.2 Schutz vor Gefährdungen durch
Laserstrahlung
5.4 Konstruktionsanforderungen
5.4.1 Gestaltung
5.4.2 Schutzgehäuse
5.4.3 Autorisierungskontrolleinrichtung
5.4.4 Emissions-Warneinrichtung
5.4.5 Justierlaser
5.4.6 Sicherheitseinrichtungen bei
richtungsveränderlicher Strahlung
5.4.7 Not-Aus-Steuerung
5.4.8 Kontrolleinrichtungen und Schaltungen
5.4.9 Vorkehrungen für die Isolierung des
Laserstrahls
5.4.10 Schutz vor gas- und partikelförmigen
Schadstoffen
6 Überprüfung der Sicherheitsanforderungen
und -massnahmen
6.1 Allgemeine Einhaltung
6.2 Einteilung in Steuerungskategorien
6.3 Einteilung in Laserklassen
7 Benutzerinformationen
7.1 Zusätzliche Anforderungen
7.2 Empfehlungen für zusätzliche Benutzerinformationen
8 Beschilderung
Anhang A (informativ) Beispiele für die Risikobeurteilung
Anhang B (informativ) Mögliche Bauformen von
handgeführten Laserbearbeitungsgeräten
B.1 Geräte mit handgeführtem Handhabungssystem,
über eine Laserstrahlführung mit einem
externen Lasergerät verbunden
B.2 Handgeführte Laseranordnung, relativ zum
ortsfesten Werkstück bewegt
B.3 Ortsfeste Laseranordnung, Werkstück relativ
zur Strahlformungseinheit
(Bearbeitungskopf) handbewegt
Literaturhinweise
Anhang ZA (informativ) Zusammenhang zwischen
dieser Europäischen Norm und den
grundlegenden Anforderungen der EG-Richtlinie
98/37/EG
Anhang ZB (informativ) Zusammenhang zwischen
dieser Europäischen Norm und den
grundlegenden Anforderungen der EG-Richtlinie
2006/42/EG
This standard is included in DIN VDE Handbook 277 and DIN VDE Handbook 526.
| DevelopmentNote |
DRAFT 2017 issued in January 2017. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN ISO 11553-2 : 2009 | Identical |
| EN ISO 11553-2:2008 | Identical |
| NEN EN ISO 11553-2 : 2009 | Identical |
| ISO 11553-2:2007 | Identical |
| I.S. EN ISO 11553-2:2008 | Identical |
| UNI EN ISO 11553-2 : 2009 | Identical |
| NF EN ISO 11553-2 : 2009 | Identical |
| UNE-EN ISO 11553-2:2009 | Identical |
| NS EN ISO 11553-2 : 2ED 2008 | Identical |
| BS EN ISO 11553-2:2008 | Identical |
| DIN EN ISO 11553-3:2013-07 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2) (ISO 11553-3:2013) |
| DIN VDE HDBK 526 : 3ED 2014 | OPTISCHE STRAHLUNGSSICHERHEIT UND LASER 2 - ANWENDUNGSSPEZIFISCHE NORMEN - HILFEN, ERLAEUTERUNGEN, CHECKLISTEN |
| DIN HDBK 277 : 3ED 2005 |
| EN 14387:2004+A1:2008 | Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking |
| EN 208 : 1998 | PERSONAL EYE-PROTECTION - EYE-PROTECTORS FOR ADJUSTMENT WORK ON LASERS AND LASER SYSTEMS (LASER ADJUSTMENT EYE-PROTECTORS) |
| DIN EN ISO 11252:2014-02 | LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION (ISO 11252:2013) |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| ISO 3821:2008 | Gas welding equipment Rubber hoses for welding, cutting and allied processes |
| ISO 11252:2013 | Lasers and laser-related equipment — Laser device — Minimum requirements for documentation |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| ISO 3864-2:2016 | Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
| VDI 2242 Blatt 1:1986-04 | Engineering design of products in accordance with ergonomics; fundamentals and procedures |
| DIN EN 1088:2008-10 | SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION |
| DIN 4844-1:2012-06 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: OBSERVATION DISTANCES AND COLORIMETRIC AND PHOTOMETRIC REQUIREMENTS |
| IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV | Safety of laser products - Part 4: Laser guards |
| ISO 13852:1996 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 388 : 1994 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ISO 13851:2002 | Safety of machinery Two-hand control devices Functional aspects and design principles |
| DIN EN 60825 SUPP 14 : 2006 | SAFETY OF LASER PRODUCTS - PART 14: A USER'S GUIDE |
| DIN EN 60204-1 : 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 352-2:2002 | Hearing protectors - General requirements - Part 2: Ear-plugs |
| EN 207:2017 | Personal eye-protection equipment - Filters and eye-protectors against laser radiation (laser eye-protectors) |
| DIN ISO 3864-3:2012-11 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3: DESIGN PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE IN SAFETY SIGNS (ISO 3864-3:2012) |
| DIN EN 1037:2008-11 | SAFETY OF MACHINERY - PREVENTATION OF UNEXPECTED START-UP |
| IEC TR 60825-14:2004 | Safety of laser products - Part 14: A user's guide |
| IEC 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
| EN 169:2002 | Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
| DIN EN 60825-4 : 2011 | SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| ISO 14121:1999 | Safety of machinery Principles of risk assessment |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN 171:2002 | Personal eye-protection - Infrared filters - Transmittance requirements and recommended use |
| EN 352-1:2002 | Hearing protectors - General requirements - Part 1: Ear-Muffs |
| DIN EN 60825-1 : 2015-07 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| EN 340:2003 | Protective clothing - General requirements |
| DIN EN ISO 13849-1:2016-06 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN 170:2002 | Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 7289:2010 | Gas welding equipment Quick-action couplings with shut-off valves for welding, cutting and allied processes |
| ISO 3864-3:2012 | Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| ISO 3253:1998 | Gas welding equipment Hose connections for equipment for welding, cutting and allied processes |
| DIN EN ISO 13850:2016-05 | SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015) |
| ISO 11145:2016 | Optics and photonics Lasers and laser-related equipment Vocabulary and symbols |
| DIN EN ISO 11553-1:2009-03 | Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO 11553-1:2005 | Safety of machinery Laser processing machines Part 1: General safety requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.