DIN EN ISO 6808:2014-10
Current
Current
The latest, up-to-date edition.
PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014)
Available format(s)
Hardcopy , PDF
Language(s)
German
Published date
01-10-2014
€84.61
Excluding VAT
| Committee |
TC 45
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| BS EN ISO 6808:2014 | Identical |
| I.S. EN ISO 6808:2014 | Identical |
| NEN EN ISO 6808 : 2014 | Identical |
| ISO 6808:2014 | Identical |
| NF EN ISO 6808 : 2014 | Identical |
| NS EN ISO 6808 : 2014 | Identical |
| NBN EN ISO 6808 : 2014 | Identical |
| EN ISO 6808:2014 | Identical |
| UNE-EN ISO 6808:2015 | Identical |
| DIN ISO 23529:2012-10 | RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS (ISO 23529:2010) |
| ISO 23529:2016 | Rubber — General procedures for preparing and conditioning test pieces for physical test methods |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| ISO 7233:2016 | Rubber and plastics hoses and hose assemblies — Determination of resistance to vacuum |
| ISO 8331:2016 | Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use and maintenance |
| DIN ISO 1817:2016-11 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF THE EFFECT OF LIQUIDS (ISO 1817:2015) |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies — Vocabulary |
| ISO 10619-1:2011 | Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature |
| DIN EN ISO 8331:2015-10 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE (ISO 8331:2016) |
| ISO 10619-2:2011 | Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures |
| DIN EN ISO 527-3:2003-07 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS |
| ISO 176:2005 | Plastics — Determination of loss of plasticizers — Activated carbon method |
| ISO/TR 17784:2003 | Rubber and plastics hoses and hose assemblies — Guide for use by purchasers, assemblers, installers and operating personnel |
| DIN EN ISO 7233:2015-10 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM (ISO 7233:2016) |
| ISO 7751:2016 | Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure |
| DIN EN ISO 176:2005-05 | Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005); German version EN ISO 176:2005 |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies — Hydrostatic testing |
| ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
| ISO 527-3:1995 | Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets |
| DIN EN ISO 1402:2010-04 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
| DIN EN ISO 10619-2:2012-03 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 2: BENDING TESTS AT SUB-AMBIENT TEMPERATURES (ISO 10619-2:2011) |
| ISO 8031:2009 | Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity |
| DIN EN ISO 10619-1:2012-03 | RUBBER AND PLASTICS HOSES AND TUBING - MEASUREMENT OF FLEXIBILITY AND STIFFNESS - PART 1: BENDING TESTS AT AMBIENT TEMPERATURE (ISO 10619-1:2011) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic — Determination of the effect of liquids |
| DIN EN ISO 7751:2015-10 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - RATIOS OF PROOF AND BURST PRESSURE TO MAXIMUM WORKING PRESSURE (ISO 7751:2016) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.