DIN ISO 5725-1:1997-11
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994)
Amended by
Available format(s)
Hardcopy , PDF
Withdrawn date
02-10-2024
Published date
01-11-1997
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Praktische Auswirkungen der Begriffe für Ringversuche
4.1 Vereinheitlichtes Messverfahren
4.2 Ringversuch
4.3 Identische Untersuchungsobjekte
4.4 Kurze Zeitabstände
4.5 Teilnehmende Labors
4.6 Untersuchungsbedingungen
5 Statistisches Modell
5.1 Grundmodell
5.2 Beziehung zwischen dem Grundmodell und der Präzision
5.3 Alternative Modelle
6 Überlegungen zur Versuchsplanung bezüglich
Genauigkeitsschätzung
6.1 Planung eines Ringversuchs
6.2 Vereinheitlichtes Messverfahren
6.3 Auswahl von Labors für den Ringversuch
6.4 Auswahl des Materials für einen Ringversuch
7 Verwertung von Genauigkeitsdaten
7.1 Bekanntgabe von Richtigkeits- und Präzisionswerten
7.2 Praktische Anwendungen von Richtigkeits- und
Präzisionswerten
Anhang A (normativ) Symbole und Abkürzungen in ISO 5725
Anhang B (normativ) Diagramme der Unsicherheiten von
Präzisionsmassen
Anhang C (informativ) Literaturhinweise
This Standard is included in DIN Handbook 224, 482 and 355.
| DevelopmentNote |
Supersedes DIN ISO 5725 (08/2002)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| ISO 5725-1:1994 | Identical |
| DIN EN ISO 15303:2009-02 | Animal and vegetable fats and oils - Detection and identification of a volatile organic contaminant by GC/MS (ISO 15303:2001) |
| DIN EN ISO 12873:2014-07 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF WAX CONTENT BY CAPILLARY GAS CHROMATOGRAPHY (ISO 12873:2010) |
| DIN EN ISO 5536:2013-08 | Milk fat products - Determination of water content - Karl Fischer method (ISO 5536:2009) |
| DIN EN ISO 12999-1 E : 2014 | ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION (ISO 12999-1:2014) |
| DIN EN 15022-4:2012-01 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 15688:2008-11 | FERTILIZERS - DETERMINATION OF UREASE INHIBITOR N-(N-BUTYL)THIOPHOSPHORIC TRIAMIDE (NBPT) USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) |
| DIN EN 15170:2009-05 | CHARACTERIZATION OF SLUDGES - DETERMINATION OF CALORIFIC VALUE |
| DIN EN ISO 11701:2010-04 | Vegetable fats and oils - Determination of phospholipids content in lecithins by HPLC using a light-scattering detector (ISO 11701:2009) |
| DIN EN 16318:2016-07 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CHROMIUM(6) BY PHOTOMETRY (METHOD A) AND BY ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION (METHOD B) |
| DIN EN 15605:2010-12 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| DIN ISO 22935-3:2012-12 | Milk and milk products - Sensory analysis - Part 3: Guidance on a method for evaluation of compliance with product specifications for sensory properties by scoring (ISO 22935-3:2009) |
| DIN EN ISO 18854:2015-08 | SMALL CRAFT - RECIPROCATING INTERNAL COMBUSTION ENGINES EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS (ISO 18854:2015) |
| DIN EN ISO 13906:2008-11 | ANIMAL FEEDING STUFFS - DETERMINATION OF ACID DETERGENT FIBRE (ADF) AND ACID DETERGENT LIGNIN (ADL) CONTENTS |
| DIN EN ISO 29822 E : 2014 | VEGETABLE FATS AND OILS - ISOMERIC DIACYLGLYCEROLS - DETERMINATION OF RELATIVE AMOUNTS OF 1,2- AND 1,3-DIACYLGLYCEROLS (ISO 29822:2009) |
| DIN EN 15704:2009-06 | LIMING MATERIALS - DETERMINATION OF THE BREAKDOWN OF GRANULATED CALCIUM AND CALCIUM/MAGNESIUM CARBONATES UNDER THE INFLUENCE OF WATER |
| DIN EN 15616:2013-02 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN EN 15479:2009-04 | FERTILIZERS - SPECTROPHOTOMETRIC DETERMINATION OF BIURET IN UREA |
| DIN EN ISO 12999-1:2014-09 | Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014) |
| DIN EN ISO 11132:2017-10 | Sensory analysis - Methodology - Guidelines for monitoring the performance of a quantitative sensory panel (ISO 11132:2012); German version EN ISO 11132:2017 |
| DIN EN 16317:2013-12 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| DIN EN ISO 16634-1:2009-07 | FOOD PRODUCTS - DETERMINATION OF THE TOTAL NITROGEN CONTENT BY COMBUSTION ACCORDING TO THE DUMAS PRINCIPLE AND CALCULATION OF THE CRUDE PROTEIN CONTENT - PART 1: OILSEEDS AND ANIMAL FEEDING STUFFS |
| DIN HDBK 355 : 1ED 2004 | |
| DIN EN ISO 20227:2016-06 (Draft) | WATER QUALITY - DETERMINATION OF THE GROWTH INHIBITION EFFECTS OF WASTE WATERS, NATURAL WATERS AND CHEMICALS ON THE DUCKWEED SPIRODELA POLYRHIZA - METHOD USING A STOCK CULTURE INDEPENDENT MICROBIOTEST (ISO 20227:2017) |
| DIN EN ISO 8199:2008-01 | Water quality - General guidance on the enumeration of micro-organisms by culture (ISO 8199:2005) |
| DIN EN 15024-2:2007-01 | COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| DIN EN ISO 11890-2:2013-07 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| DIN EN ISO 17294-1:2007-02 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
| DIN EN ISO 17932:2011-12 | Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011) |
| DIN EN ISO 1211:2010-11 | Milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1211:2010) |
| DIN EN 14185-2:2006-08 | Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column |
| DIN EN ISO 11609:2016-07 (Draft) | DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:2017) |
| DIN EN 12506:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CI[-], CO, CR, CR(VI), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN |
| DIN EN ISO 662:2016-08 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT (ISO 662:2016) |
| DIN EN 15915:2010-12 | Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN ISO 13366-2:2007-01 | Milk - Enumeration of somatic cells - Part 2: Guidance on the operation of fluoro-opto-electronic counters (ISO 13366-2:2006) |
| DIN EN 14888:2005-10 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM CONTENT |
| DIN EN ISO 734-1:2001-02 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 1: EXTRACTION METHOD WITH HEXANE (OR LIGHT PETROLEUM) |
| DIN EN ISO 734-2:2010-08 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 2: RAPID EXTRACTION METHOD |
| DIN EN ISO 734-1:2007-02 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 1: EXTRACTION METHOD WITH HEXANE (OR LIGHT PETROLEUM) |
| DIN EN 15062:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| DIN EN ISO 665:2001-02 | OILSEEDS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT |
| DIN EN ISO 11691:2010-01 | Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:2009 |
| DIN EN ISO 8968-4:2016-09 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 4: DETERMINATION OF PROTEIN AND NON-PROTEIN NITROGEN CONTENT AND TRUE PROTEIN CONTENT CALCULATION (REFERENCE METHOD) (ISO 8968-4:2016) |
| DIN EN 15948:2015-06 | CEREALS - DETERMINATION OF MOISTURE AND PROTEIN - METHOD USING NEAR-INFRARED-SPECTROSCOPY IN WHOLE KERNELS |
| DIN EN 15909:2010-11 | Fertilizers - Determination of calcium and formate in calcium foliar fertilizers |
| DIN EN 15905:2010-11 | Fertilizers - Determination of 3-methylpyrazole (MP) using high-performance liquid chromatography (HPLC) |
| DIN EN ISO 3656:2017-08 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ULTRAVIOLET ABSORBANCE EXPRESSED AS SPECIFIC UV EXTINCTION (ISO 3656:2011 + AMD 1:2017) |
| DIN EN 12698-1:2007-06 | Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods |
| DIN EN 14939:2006-09 | Copper and copper alloys - Determination of beryllium content - FAAS method |
| DIN EN 16317:2017-05 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF ARSENIC BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| DIN EN ISO 5943:2007-01 | CHEESE AND PROCESSED CHEESE PRODUCTS - DETERMINATION OF CHLORIDE CONTENT - POTENTIOMETRIC TITRATION METHOD |
| DIN EN 14941:2006-09 | Copper and copper alloys - Determination of cobalt content - FAAS method |
| DIN EN 15054:2006-08 | Non fatty foods - Determination of chlormequat and mepiquat - LC-MS method |
| DIN EN 15510:2017-10 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
| VDI 3475 Blatt 2:2005-12 | Emission control - Facilities for biological waste - Composting an anaerobic (co-)digestion - Plant capacities up to approx. 6000 Mg/a |
| DIN EN 15979:2011-04 | Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation |
| DIN EN 16487:2015-02 | ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION |
| DIN EN ISO 11085:2016-02 | CEREALS, CEREALS-BASED PRODUCTS AND ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FAT AND TOTAL FAT CONTENT BY THE RANDALL EXTRACTION METHOD (ISO 11085:2015) |
| VDE 0370-16 : 1999 | INSULATING LIQUIDS - DETERMINATION OF DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| DIN EN ISO 17059:2009-11 | OILSEEDS - EXTRACTION OF OIL AND PREPARATION OF METHYL ESTERS OF TRIGLYCERIDE FATTY ACIDS FOR ANALYSIS BY GAS CHROMATOGRAPHY (RAPID METHOD) |
| DIN ISO 362-2:2010-05 | Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category (ISO 362-2:2009) |
| DIN EN 15916-2:2010-12 | Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN ISO 21068-1:2008-12 | Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 1: General information and sample preparation (ISO 21068-1:2008) |
| DIN EN ISO 6883 E : 2017 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CONVENTIONAL MASS PER VOLUME (LITRE WEIGHT IN AIR) (ISO 6883:2017) |
| DIN EN 15234-1:2011-05 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| DIN ISO 17713-1:2007-10 | METEOROLOGY - WIND MEASUREMENTS - PART 1: WIND TUNNEL TEST METHODS FOR ROTATING ANEMOMETER PERFORMANCE |
| DIN EN ISO 734:2016-05 | Oilseed meals - Determination of oil content - Extraction method with hexane (or light petroleum) (ISO 734:2015) |
| DIN EN 15475:2009-04 | FERTILIZERS - DETERMINATION OF AMMONIACAL NITROGEN |
| DIN EN ISO 12228-1:2014-10 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS (ISO 12228-1:2014) |
| DIN EN 15025:2010-12 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 15477:2015-03 (Draft) | FERTILIZERS - DETERMINATION OF THE WATER-SOLUBLE POTASSIUM CONTENT |
| DIN ISO 19730:2009-07 | SOIL QUALITY - EXTRACTION OF TRACE ELEMENTS FROM SOIL USING AMMONIUM NITRATE SOLUTION |
| DIN EN ISO 12625-15:2015-05 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| DIN 53508:2000-03 | Accelerated ageing of rubber |
| DIN EN ISO 12228-1 E : 2014 | DETERMINATION OF INDIVIDUAL AND TOTAL STEROLS CONTENTS - GAS CHROMATOGRAPHIC METHOD - PART 1: ANIMAL AND VEGETABLE FATS AND OILS (ISO 12228-1:2014) |
| DIN EN 16075:2012-01 | Fertilizers - Determination of N-(2-nitrophenyl)phosphoric triamide (2-NPT) in urea and fertilizers containing urea - Method using high-performance liquid chromatographie (HPLC) |
| DIN EN 15842:2010-06 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| DIN EN 14793:2017-05 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| DIN EN ISO 16014-5:2012-10 | PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012) |
| DIN EN ISO 15351:2010-08 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
| DIN EN 16117-1:2011-12 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % |
| DIN EN ISO 12836:2015-11 | DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
| DIN EN 16319:2016-03 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF CADMIUM, CHROMIUM, LEAD AND NICKEL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) AFTER AQUA REGIA DISSOLUTION |
| DIN EN 16024:2011-06 | Fertilizers - Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
| DIN EN ISO 8534:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD (PYRIDINE FREE) (ISO 8534:2017) |
| DIN EN ISO 27107:2010-08 | Animal and vegetable fats and oils - Determination of peroxide value - Potentiometric end-point determination (ISO 27107:2008, corrected version 2009-05-15) |
| DIN 55957:2016-08 | BINDERS FOR PAINTS AND VARNISHES - METHYLATION AND SILYLATION OF FATTY ACIDS AND ANALYSIS BY GAS CHROMATOGRAPHY |
| DIN EN 15690-2:2009-07 | COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| DIN EN ISO 11816-1:2014-03 | Milk and milk products - Determination of alkaline phosphatase activity - Part 1: Fluorimetric method for milk and milk-based drinks (ISO 11816-1:2013) |
| DIN EN ISO 6885:2016-07 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ANISIDINE VALUE (ISO 6885:2016) |
| DIN EN ISO 22160:2007-08 | MILK AND MILK-BASED DRINKS - DETERMINATION OF ALKALINE PHOSPHATASE ACTIVITY - ENZYMATIC PHOTO-ACTIVATED SYSTEM (EPAS) METHOD |
| DIN EN 1607:2013-05 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF TENSILE STRENGTH PERPENDICULAR TO FACES |
| DIN EN ISO 10519:2015-12 | RAPESEED - DETERMINATION OF CHLOROPHYLL CONTENT - SPECTROMETRIC METHOD (ISO 10519:2015) |
| DIN EN ISO 8968-1:2014-06 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 1: KJELDAHL PRINCIPLE AND CRUDE PROTEIN CALCULATION (ISO 8968-1:2014) |
| DIN EN ISO 6320:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF REFRACTIVE INDEX (ISO 6320:2017) |
| DIN EN ISO 11378-2:2003-02 | TEXTILE FLOOR COVERINGS - LABORATORY SOILING TESTS - PART 2: DRUM TEST (ISO 11378-2:2001 + AMD 1:2017) |
| DIN EN 15360:2007-08 | Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC) |
| DIN EN ISO 20743:2013-12 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| DIN EN 13370:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, CN[-] EASILY LIBERATABLE, F[-] |
| DIN EN ISO 10723:2013-04 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| DIN EN ISO 6647-2:2015-09 | RICE - DETERMINATION OF AMYLOSE CONTENT - PART 2: ROUTINE METHODS (ISO 6647-2:2015) |
| DIN EN ISO 8968-3:2007-09 | Milk - Determination of nitrogen content - Part 3: Block-digestion method (Semi-micro rapid routine method) (ISO 8968-3:2004) |
| DIN EN ISO 13366-1:2008-06 | MILK - ENUMERATION OF SOMATIC CELLS - PART 1: MICROSCOPIC METHOD (REFERENCE METHOD) |
| DIN EN ISO 182-4:2001-02 | PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 4: POTENTIOMETRIC METHOD |
| DIN EN ISO 4625-1:2006-04 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
| DIN EN ISO 24276:2013-10 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - GENERAL REQUIREMENTS AND DEFINITIONS (ISO 24276:2006 + AMD 1:2013) |
| DIN EN ISO 6647-1:2015-09 | RICE - DETERMINATION OF AMYLOSE CONTENT - PART 1: REFERENCE METHOD (ISO 6647-1:2015) |
| DIN EN ISO 7235:2010-01 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| VDI 3478 Blatt 2:2008-04 | Biological waste gas purification - Biological trickle bed-reactors |
| VDI 4210 Blatt 1:1999-06 | Remote sensing - Atmospheric measurements with LIDAR - Measuring gaseous air pollution with DAS LIDAR |
| VDI 3478 Blatt 1:2011-03 | Biological waste gas purification - Bioscrubbers |
| VDI 3786 Blatt 1:2013-08 | Environmental meteorology - Meteorological measurements - Fundamentals |
| VDI 4256 Blatt 1:2010-10 | Bioaerosols and biological agents - Determination of performance characteristics - Culture-based counting methods |
| VDI 3786 Blatt 19:2016-10 (Draft) | Environmental meteorology - Ground-based remote sensing of meteorological parameters - Particle backscatter lidar |
| VDI 3786 Blatt 17:2007-02 | Environmental meteorology - Ground-based remote sensing of the wind vector - Wind profiler radar |
| DIN EN 15517:2008-09 | Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction |
| DIN EN ISO 12779:2013-08 | Lactose - Determination of water content - Karl Fischer method (ISO 12779:2011) |
| DIN ISO 20481:2011-01 | Coffee and coffee products - Determination of the caffeine content using high performance liquid chromatography (HPLC) - Reference method (ISO 20481:2008) |
| DIN EN 15705:2010-07 | Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylene-urea oligomers (method B); German version EN 15705:2010 |
| DIN EN 16192:2012-02 | Characterization of waste - Analysis of eluates |
| DIN EN 15764:2010-04 | Foodstuffs - Determination of trace elements - Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion |
| DIN 55672-2 E : SUSPENDED | GEL PERMEATION CHROMATOGRAPHY (GPC) - PART 2: N,N-DIMETHYLACETAMIDE (DMAC) AS ELUENT |
| DIN EN 15750:2010-02 | Fertilizers - Determination of total nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods |
| DIN 1319-2:2005-10 | Basic concepts in metrology - Part 2: Terminology related to measuring equipment |
| DIN HDBK 482 : 2ED 2015 | |
| DIN EN ISO 29822:2014-07 | VEGETABLE FATS AND OILS - ISOMERIC DIACYLGLYCEROLS - DETERMINATION OF RELATIVE AMOUNTS OF 1,2- AND 1,3-DIACYLGLYCEROLS (ISO 29822:2009) |
| DIN 33897-1:2016-08 | WORKPLACE ATMOSPHERES - ROUTINE METHODS FOR THE DETERMINATION OF THE DUSTINESS OF BULK MATERIALS - PART 1: BASICS |
| DIN EN 15305:2009-01 | NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION |
| DIN EN 15781:2009-11 | Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation |
| DIN 10785:2013-06 | ANALYSIS OF COFFEE AND COFFEE PRODUCTS - DETERMINATION OF ACRYLAMIDE - METHODS USING HPLC-MS/MS AND GC-MS AFTER DERIVATIZATION |
| DIN EN 16278:2012-09 | ANIMAL FEEDING STUFFS - DETERMINATION OF INORGANIC ARSENIC BY HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY (HG-AAS) AFTER MICROWAVE EXTRACTION AND SEPARATION BY SOLID PHASE EXTRACTION (SPE) |
| DIN EN ISO 17678:2010-06 | MILK AND MILK PRODUCTS - DETERMINATION OF MILK FAT PURITY BY GAS CHROMATOGRAPHIC ANALYSIS OF TRIGLYCERIDES (REFERENCE METHOD) |
| DIN EN ISO 6883:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF CONVENTIONAL MASS PER VOLUME (LITRE WEIGHT IN AIR) (ISO 6883:2017) |
| DIN EN 13037:2012-01 | Soil improvers and growing media - Determination of pH |
| DIN EN 13041:2012-01 | Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space |
| DIN EN 13039:2012-01 | Soil improvers and growing media - Determination of organic matter content and ash |
| DIN EN 12441-11:2006-10 | Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method |
| DIN EN ISO 6975:2005-09 | NATURAL GAS - EXTENDED ANALYSIS - GAS-CHROMATOGRAPHIC METHOD |
| DIN EN ISO 16931:2009-08 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF POLYMERIZED TRIACYLGLYCEROLS BY HIGH-PERFORMANCE SIZE-EXCLUSION CHROMATOGRAPHY (HPSEC) |
| DIN EN ISO 13468-2:2006-07 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) |
| DIN EN 1608:2013-05 | Thermal insulating products for building applications - Determination of tensile strength parallel to faces |
| DIN EN ISO 6926:2016-08 | Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) |
| DIN EN ISO 3657:2013-12 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF SAPONIFICATION VALUE (ISO 3657:2013) |
| DIN EN ISO 5764:2009-10 | Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009) |
| DIN EN ISO 11890-1:2007-09 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| DIN EN 15022-3:2006-12 | Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS) |
| DIN EN ISO 2178:2015-01 (Draft) | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
| DIN EN ISO 15189:2014-11 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| DIN EN 12089:2013-06 | THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF BENDING BEHAVIOUR |
| DIN EN 14984:2016-10 | LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
| DIN 55672-1 E : SUSPENDED | GEL PERMEATION CHROMATOGRAPHY (GPC) - PART 1: TETRAHYDROFURAN (THF) AS ELUENT |
| DIN EN ISO 8292-1:2010-08 | Animal and vegetable fats and oils - Determination of solid fat content by pulsed NMR - Part 1: Direct method (ISO 8292-1:2008) |
| DIN EN ISO 8292-2:2010-08 | Animal and vegetable fats and oils - Determination of solid fat content by pulsed NMR - Part 2: Indirect method (ISO 8292-2:2008) |
| DIN EN 16279:2012-09 | Animal feeding stuffs - Determination of fluoride content after hydrochloric acid treatment by ion-sensitive electrode method (ISE) |
| DIN EN 15621:2016-11 (Draft) | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
| DIN EN ISO 2171:2010-08 | Cereals, pulses and by-products - Determination of ash yield by incineration (ISO 2171:2007) |
| DIN EN 15428:2007-11 | Soil improvers and growing media - Determination of particle size distribution |
| DIN EN 15749:2010-02 | Fertilizers - Determination of sulfates content using three different methods |
| DIN 6868-157:2014-11 | Image quality assurance in diagnostic X-ray departments - Part 157: X-ray ordinance acceptance and constancy test of image display systems in their environment |
| DIN ISO 22036:2009-06 | Soil quality - Determination of trace elements in extracts of soil by inductively coupled plasma - atomic emission spectrometry (ICP-AES) (ISO 22036:2008) |
| DIN EN 16711-2:2016-02 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION |
| DIN EN 15478:2009-04 | FERTILIZERS - DETERMINATION OF TOTAL NITROGEN IN UREA |
| DIN EN ISO 12625-16:2015-05 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| DIN ISO 20193:2015-06 | Tobacco and tobacco products - Determination of the width of the strands of cut tobacco (ISO 20193:2012) |
| DIN 51730:2007-09 | Testing of solid fuels - Determination of fusibility of fuel ash |
| DIN EN 15622:2010-06 | Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 16711-1:2016-02 | TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
| DIN EN 15765:2010-04 | Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion |
| DIN EN ISO 11876:2010-12 | Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010) |
| DIN EN ISO 15193:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| DIN EN ISO 3960:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF PEROXIDE VALUE - IODOMETRIC (VISUAL) ENDPOINT DETERMINATION (ISO 3960:2017) |
| DIN EN ISO 12873 E : 2014 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF WAX CONTENT BY CAPILLARY GAS CHROMATOGRAPHY (ISO 12873:2010) |
| DIN 55672-3 E : SUSPENDED | GEL PERMEATION CHROMATOGRAPHY (GPC) - PART 3: WATER AS ELUENT |
| DIN EN ISO 3656:2011-05 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ULTRAVIOLET ABSORBANCE EXPRESSED AS SPECIFIC UV EXTINCTION (ISO 3656:2011 + AMD 1:2017) |
| DIN EN ISO 14637:2007-03 | Milk - Determination of urea content - Enzymatic method using difference in pH (Reference method) (ISO 14637:2004) |
| DIN EN ISO 11689:1997-03 | ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE EMISSION-DATA FOR MACHINERY AND EQUIPMENT |
| DIN EN 826:2013-05 | Thermal insulating products for building applications - Determination of compression behaviour |
| DIN EN ISO 12625-3:2014-09 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014) |
| DIN EN ISO 9167-1:2013-12 | RAPESEED - DETERMINATION OF GLUCOSINOLATE CONTENT - PART 1: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (ISO 9167-1:1992 + AMD 1:2013) |
| DIN EN 15550:2016-11 (Draft) | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| DIN EN 15510:2016-11 (Draft) | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, IRON, ZINC, COPPER, MANGANESE, COBALT, MOLYBDENUM AND LEAD BY ICP-AES |
| DIN EN ISO/IEC 17043:2010-05 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| DIN EN ISO 734-2:2001-02 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - PART 2: RAPID EXTRACTION METHOD |
| EN 15690-2:2009 | Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 14938-2:2010-12 | Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| DIN EN ISO 12872 E : 2014 | OLIVE OILS AND OLIVE-POMACE OILS - DETERMINATION OF THE 2-GLYCERYL MONOPALMITATE CONTENT (ISO 12872:2010) |
| DIN EN ISO 12872:2014-07 | Olive oils and olive-pomace oils - Determination of the 2-glyceryl monopalmitate content (ISO 12872:2010) |
| DIN EN 15023-3:2010-12 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 16117-2:2013-02 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| DIN EN 61620 : 1999 | INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| DIN 53804-1:2002-04 | STATISTICAL EVALUATION - PART 1: CONTINUOUS CHARACTERISTICS |
| DIN EN ISO 22959:2009-10 | Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection (ISO 22959:2009) |
| DIN ISO 20179:2007-10 | Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection (ISO 20179:2005) |
| DIN EN 15703-2:2015-03 | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN EN ISO 18113-1:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| DIN EN 16320:2013-12 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
| DIN EN 15476:2009-04 | FERTILIZERS - DETERMINATION OF NITRIC AND AMMONIACAL NITROGEN ACCORDING TO DEVARDA |
| DIN EN ISO 22630:2016-05 | OILSEED MEALS - DETERMINATION OF OIL CONTENT - RAPID EXTRACTION METHOD (ISO 22630:2015) |
| DIN ISO 8243:2015-12 | CIGARETTES - SAMPLING (ISO 8243:2013) |
| DIN EN 16357:2013-11 | Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid |
| DIN EN ISO 16297:2014-09 | MILK - BACTERIAL COUNT - PROTOCOL FOR THE EVALUATION OF ALTERNATIVE METHODS (ISO 16297:2013) |
| DIN EN 16328:2013-02 | Fertilizers - Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP) - Method using high-performance liquid chromatography (HPLC) |
| DIN ISO 8454:2012-02 | Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method (ISO 8454:2007 + Amd.1:2009) |
| DIN EN 16378:2013-12 | CEREALS - DETERMINATION OF IMPURITIES CONTENT IN MAIZE (ZEA MAYS, L.) AND SORGHUM (SORGHUM BICOLOR, L.) |
| DIN EN 13038:2012-01 | Soil improvers and growing media - Determination of electrical conductivity |
| DIN EN 14940-2:2006-09 | Copper and copper alloys - Determination of chromium content - Part 2: FAAS method |
| DIN EN ISO 9614-1:2009-11 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| DIN EN ISO 9614-3:2009-11 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
| DIN EN 14942-2:2006-09 | Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method |
| DIN EN ISO 15197:2015-12 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013) |
| DIN EN ISO 663:2016-10 (Draft) | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF INSOLUBLE IMPURITIES CONTENT (ISO 663:2017) |
| DIN EN ISO 16035:2005-11 | Animal and vegetable fats and oils - Determination of low-boiling halogenated hydrocarbons in edible oils (ISO 16035:2003) |
| DIN EN 15055:2006-08 | Non fatty foods - Determination of chlormequat and mepiquat - LC-MS/MS method |
| DIN EN ISO 659:2009-11 | Oilseeds - Determination of oil content (Reference method) (ISO 659:2009) |
| DIN EN ISO 15839:2007-02 | Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests (ISO 15839:2003) |
| DIN EN ISO 8069:2007-09 | Dried milk - Determination of content of lactic acid and lactates (ISO 8069:2005) |
| DIN EN ISO 6320:2017-07 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF REFRACTIVE INDEX (ISO 6320:2017) |
| DIN ISO 6673:2007-03 | GREEN COFFEE - DETERMINATION OF LOSS IN MASS AT 105 DEGREES C |
| DIN EN 15621:2017-10 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CALCIUM, SODIUM, PHOSPHORUS, MAGNESIUM, POTASSIUM, SULPHUR, IRON, ZINC, COPPER, MANGANESE AND COBALT AFTER PRESSURE DIGESTION BY ICP-AES |
| DIN EN ISO 13884:2005-11 | Animal and vegetable fats and oils - Determination of isolated trans isomers by infrared spectrometry (ISO 13884:2003) |
| DIN EN 14627:2005-07 | Foodstuffs - Determination of trace elements - Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion |
| DIN EN ISO 1518-1:2011-09 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD (ISO 1518-1:2011) |
| DIN EN 375:2001-06 | INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR PROFESSIONAL USE |
| DIN EN 16320:2017-05 | FERTILIZERS AND LIMING MATERIALS - DETERMINATION OF MERCURY BY VAPOUR GENERATION (VG) AFTER AQUA REGIA DISSOLUTION |
| DIN EN ISO 5983-2:2009-10 | ANIMAL FEEDING STUFFS - DETERMINATION OF NITROGEN CONTENT AND CALCULATION OF CRUDE PROTEIN CONTENT - PART 2: BLOCK DIGESTION AND STEAM DISTILLATION METHOD |
| DIN EN 15550:2017-10 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| DIN EN ISO 8968-1:2002-06 | MILK AND MILK PRODUCTS - DETERMINATION OF NITROGEN CONTENT - PART 1: KJELDAHL PRINCIPLE AND CRUDE PROTEIN CALCULATION (ISO 8968-1:2014) |
| DIN EN ISO 14501:2008-01 | Milk and milk powder - Determination of aflatoxin M1 content - Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography (ISO 14501:2007) |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.