DIN VDE 0805 : 1990 AMD 1 1991
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT INCLUDING ELECTRICAL BUSINESS EQUIPMENT
01-11-1993
12-01-2013
Abschnitte
1 Allgemeines
1.1 Anwendungsbereich und Zweck
1.2 Begriffe
1.3 Allgemeine Anforderungen
1.4 Allgemeine Prüfbedingungen
1.5 Bauteile
1.6 Anschluss an den Versorgungsstromkreis
1.7 Aufschriften und Anleitungen
2 Grundsätzliche konstruktive Anforderungen
2.1 Schutz gegen gefährliche Körperströme (elektrischen
Schlag) und Energiegefahr
2.2 Isolierung
2.3 SELV-Kreise (Sicherheits-Kleinspannungs-Stromkreise)
2.4 Stromkreise mit Strombegrenzung
2.5 Massnahmen zum Anschluss an den Schutzleiter
2.6 Trennung vom Versorgungsstromkreis
2.7 Überstrom- und Kurzschlussschutz in Primärkreisen
2.8 Verriegelungen
2.9 Luft- und Kriechstrecken und Dicke der Isolierung
3 Leitungen, Verbindungen und Anschluss an den
Versorgungsstromkreis
3.1 Leitungen
3.2 Anschluss an den Versorgungsstromkreis
3.3 Anschlussklemmen für äussere Anschlussleiter zum
Versorgungsstromkreis
4 Konstruktive Anforderungen
4.1 Standfestigkeit und mechanische Sicherheit
4.2 Mechanische Festigkeit und Ausgleich innerer
Spannungen
4.3 Konstruktive Einzelheiten
4.4 Brandschutz
5 Erwärmungs- und elektrische Anforderungen
5.1 Erwärmung
5.2 Ableitstrom
5.3 Spannungsfestigkeit
5.4 Bestimmungswidriger Betrieb und Fehlerbedingungen
Anhänge
Anhang A Prüfung der Widerstandsfähigkeit gegenHitze und
Brände
Anhang B Motorprüfung bei bestimmungswidrigen Bedingungen
Anhang C Transformatoren
Anhang D Messgerät für die Prüfung des Ableitstroms
Anhang E Prüfung der Temperaturerhöhung einer Wicklung
Anhang F Messung der Luft- und Kriechstrecken
Anhang G Ableitstrom bei Geräten in IT-Systemen
Anhang H Ionisierende Strahlung
Anhang J Anleitung zum Schutz gegen das Eindringen von
Wasser
Anhang K Tabelle der elektrochemischen Spannungsreihe
Anhang L Temperaturabhängige Vorrichtungen
Anhang M Beispiele von Normallastbedingungen für elektrische
Büromaschinen
Anhang ZA (normativ) Andere in dieser Norm zitierte
internationale Veröffentlichungen
Anhang ZB (informativ) Besondere nationale Bedingungen zu EN
Anhang ZC (informativ) Nationale Abweichungen zu EN
| DevelopmentNote |
DIN VDE 0805 DRAFT AMD 16 (1999-10) and DRAFT AMD 17 (1999-12) are superseded by DIN EN 60950-1. Supersedes DIN IEC 60380. (06/2004)
|
| DocumentType |
Draft
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| VDE 0805 : 2001 | Identical |
| VDE 0834 : 1991 | LUMINOUS CALL SYSTEMS - INSTALLATIONS IN HOSPITALS, NURSING HOMES AND SIMILAR INSTITUTIONS, ERECTION AND OPERATION |
| VDE 0831 : 2006 | ELECTRIC SIGNALLING SYSTEMS FOR RAILROADS |
| DIN VDE 0834 : 1991 | LUMINOUS CALL SYSTEMS - INSTALLATIONS IN HOSPITALS, NURSING HOMES AND SIMILAR INSTITUTIONS - ERECTION AND OPERATION |
| DIN VDE 0281-402 : 1988 | PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - PVC-SHEATHED FLEXIBLE CORD 05VV |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC 60038:2009 | IEC standard voltages |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| DIN VDE 0630 : 1992 | SWITCHES FOR APPLIANCES FOR A RATED VOLTAGE NOT EXCEEDING 500 V AND A RATED CURRENT NOT EXCEEDING 63 A |
| IEC 60328:1972 | Switches for appliances |
| DIN VDE 0800-5 : 1991 | TELECOMMUNICATIONS - ADDITIONAL REQUIREMENTS FOR POWER SUPPLY |
| DIN VDE 0100-707 : DRAFT 89 | ERECTION OF POWER INSTALLATIONS WITH NOMINAL VOLTAGES UP TO 1000 V; EARTHING REQUIREMENTS FOR THE INSTALLATION OF DATA PROCESSING EQUIPMENT |
| DIN IEC 60038 : 2002 | IEC STANDARD VOLTAGES |
| DIN VDE 0110-2 : 1989 | ISOLATIONSKOORDINATION FUER ELEKTRISCHE BETRIEBSMITTEL IN NIEDERSPANNUNGSANLAGEN; BEMESSUNG DER LUFT- UND KRIECHSTRECKEN |
| DIN VDE 0110-1 : 1997 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
| DIN 40011:1989-08 | ELECTRICAL ENGINEERING - EARTH, PROTECTIVE CONDUCTOR, NOISELESS EARTH - FRAME OR CHASSIS, CLASS 2 EQUIPMENT - GRAPHICAL SYMBOLS ON ELECTRICAL EQUIPMENT |
| HD 214 : 200S2 | RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| DIN VDE 0551-1 : 1989 | ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS |
| DIN 49464-1 : 1966 | TWO-POLE PLUG 2,5 A, 250 V FOR CLASS 2 APPLIANCES - DIMENSIONS |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| HD 196 : 200S1 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES |
| DIN 40050:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| DIN VDE 0800-2 : 1985 | TELECOMMUNICATIONS - EARTHING AND EQUIPOTENTIAL BONDING |
| DIN VDE 0470-1 : 1992 | |
| IEC 60364-5-51:2005 | Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules |
| DIN VDE 0100-510 : 2014-10 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES (IEC 60364-5-51:2005, MODIFIED) |
| DIN-FACHBERICHT 4-1 : 1988 | GRAPHISCHE SYMBOLE NACH DIN 30600 - TEIL 1: BILDZEICHEN - UEBERSICHT |
| DIN 7728-1:1988-01 | PLASTICS - SYMBOLS AND CODES FOR POLYMERS AND THEIR SPECIAL CHARACTERISTICS |
| DIN 13-13:1983-10 | ISO METRIC SCREW THREADS - SELECTED SIZES FOR SCREWS, BOLTS AND NUTS FROM 1 TO 52 MM SCREW THREAD DIAMETER AND LIMITS OF SIZES |
| DIN 40200:1981-10 | NOMINAL VALUE, LIMITING VALUE, RATED VALUE, RATING - CONCEPTS |
| DIN VDE 0100-300 : 1996 | ERECTION OF POWER INSTALLATIONS WITH NOMINAL VOLTAGES UP TO 1000 V - PART 3: ASSESSMENT OF GENERAL CHARACTERISTICS OF INSTALLATIONS |
| DIN VDE 0281-401 : 1985 | PVC CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - PVC-SHEATHED FLEXIBLE CORD 03VV |
| IEC GUIDE 105:1985 | Principles concerning the safety of equipment electricallyconnected to a telecommunications network |
| DIN VDE 0878-3 : 1989 | RADIO INTERFERENCE SUPPRESSION OF TELECOMMUNICATION SYSTEMS AND APPARATUS - LIMITS AND METHODS OF MEASUREMENT OF RADIO INTERFERENCE |
| VDE 0303-1 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| VDE 0301-1 : 2008 | ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION |
| DIN 40010:1990-08 | ELECTRICAL ENGINEERING; VDE TEST MARKS; MARKING ON ELECTRICAL EQUIPMENT |
| HD 22-4 : 200S4 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 4: CORDS AND FLEXIBLE CABLES |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| DIN 6814-3:2016-08 | TERMS IN THE FIELD OF RADIOLOGICAL TECHNIQUE - PART 3: DOSIMETRY |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| DIN VDE 0800-1 : 1989 | TELECOMMUNICATIONS - GENERAL CONCEPTS - REQUIREMENTS AND TESTS FOR THE SAFETY OF FACILITIES AND APPARATUS |
| ISO 216:2007 | Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| DIN 30600:1985-11 | GRAPHICAL SYMBOLS - REGISTRATION, DESIGNATION |
| DIN VDE 0837 : 1986 | STRAHLUNGSSICHERHEIT VON LASER-EINRICHTUNGEN; KLASSIFIZIERUNG VON ANLAGEN, ANFORDERUNGEN, BENUTZER-RICHTLINIEN |
| IEC 60707:1999 | Flammability of solid non-metallic materials when exposed to flame sources - List of test methods |
| HD 444.2.2 : 200S2 | FIRE HAZARD TESTING - TEST METHODS - NEEDLE-FLAME TEST |
| DIN VDE 0800-8 : 1989 | TELECOMMUNICATIONS; APPLICATION OF KU VALUES |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| DIN 40004:1983-07 | VOLTAGE AND CURRENT; ABBREVIATIONS AND SIGNS |
| ISO 7001:2007 | Graphical symbols — Public information symbols |
| IEC 60245-4:2011 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables |
| IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
| IEC 60364-3:1993 | Electrical installations of buildings - Part 3: Assessment of general characteristics |
| DIN 6730:2016-05 (Draft) | PAPER, BOARD AND PULPS - VOCABULARY |
| DIN VDE 0620 : 1992 | PLUGS AND SOCKET-OUTLETS UP TO 400 V 25 A |
| ISO 4046:1978 | Paper, board, pulp and related terms — Vocabulary |
| DIN 476:1976-12 | TRIMMED SIZES OF PAPER |
| HD 365 : 200S3 | CLASSIFICATION OF DEGREES OF PROTECTION PROVIDED BY ENCLOSURES |
| DIN VDE 0804 : 1989 AMD 1 1992 | TELECOMMUNICATIONS - ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| DIN VDE 0100-200 : 2006-06 | LOW-VOLTAGE INSTALLATIONS - PART 200: DEFINITIONS |
| HD 195 : 200S6 | SAFETY REQUIREMENTS FOR MAINS OPERATED ELECTRONIC AND RELATED APPARATUS FOR HOUSEHOLD AND SIMILAR GENERAL USE |
| IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
| DIN VDE 0800-9 : 1989 | TELECOMMUNICATIONS; KU-VALUES OF SAFETY RELEVANT COMPONENTS AND INSULATIONS |
| DIN 31005:1985-04 | SAFETY DESIGN OF TECHNICAL PRODUCTS - LOCKING DEVICES - COUPLINGS |
| IEC 60364-7-707:1984 | Electrical installations of buildings. Part 7: Requirements for special installations or locations. Section 707: Earthing requirements for the installation of data processing equipment |
| HD 482 : 200S1 | RADIATION SAFETY OF LASER PRODUCTS, EQUIPMENT CLASSIFICATION, REQUIREMENTS, AND USER'S GUIDE |
| HD 441 : 200S1 | METHODS OF TEST FOR THE DETERMINATION OF THE FLAMMABILITY OF SOLID ELECTRICAL INSULATING MATERIALS WHEN EXPOSED TO AN IGNITING SOURCE |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| DIN 49440-1:2006-01 | TWO-POLE SOCKET-OUTLETS WITH EARTHING CONTACT, 16 A 250 V A.C. - PART 1: MAIN DIMENSIONS |
| DIN VDE 0701-240 : 1986 | REPAIR, MODIFICATION AND INSPECTION OF ELECTRICAL APPLIANCES; SAFETY REQUIREMENTS FOR DATA PROCESSING EQUIPMENT AND OFFICE MACHINES |
| DIN 49441:1972-06 | TWO-POLE PLUGS WITH EARTHING-CONTACT 10 A 250 V APPROX OR EQUALS TO AND 10 A 250 V, 16 A 250 V |
| IEC 60380:1985 | Safety of electrically energized office machines |
| DIN V 8418:1988-02 | USER'S INFORMATION; REFERENCES FOR THE PRESENTATION |
| HD 243 : S12 | GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - INDEX, SURVEY AND COMPILATION OF THE SINGLE SHEETS |
| DIN VDE 0105-1 : 1983 | OPERATION OF POWER INSTALLATIONS; GENERAL REQUIREMENTS |
| HD 385 : 200S2 | TEST METHODS FOR INSULATIONS AND SHEATHS OF ELECTRIC CABLES AND CORDS (ELASTOMERIC AND THERMOPLASTIC COMPOUNDS) |
| HD 21 PT4 : 200S2 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 4: SHEATHED CABLES FOR FIXED WIRING |
| IEC 60227-5:2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) |
| DIN VDE 0625-1 : 1987 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES |
| VDE 0471-2-2 : 1996 | FIRE HAZARD TESTING - PART 2: TEST METHODS; SECTION 2: NEEDLE-FLAME TEST |
| IEC 60617-2:1996 | Graphical symbols for diagrams - Partie 2: Symbol elements, qualifying symbols and other symbols having general application |
| DIN IEC 60112 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| DIN 45635-19:1989-09 | MEASUREMENT OF AIRBORNE NOISE EMITTED BY MACHINES; ENVELOPING SURFACE METHOD, OFFICE MACHINES |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.