EN 1213:1999
Current
The latest, up-to-date edition.
Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
20-10-1999
The purpose of this Standard EN 1213 is to specify: - the requirements for the materials and the design of stopvalves; - the mechanical, hydraulic and acousticrequirements ; - the test methods; - the marking requirements; for copper alloy stopvalves for use with drinking water supply in buildings. This standard applies primarily to copper alloy stopvalves, dimensions DN 10 to DN 100, for potable water supply in buildings up to PN 10 and a distribution temperature of 65°C. Occasional excursions up to 95°C are permitted for a period of 1 hr. maximum.
| Committee |
CEN/TC 164
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 1213 : 1ED 2000 | Identical |
| NF EN 1213 : 2000 | Identical |
| NBN EN 1213 : 2000 | Identical |
| BS EN 1213:2000 | Identical |
| PN EN 1213 : 2002 | Identical |
| UNI EN 1213 : 2001 | Identical |
| NEN EN 1213 : 1999 | Identical |
| SN EN 1213 : 2000 | Identical |
| UNE-EN 1213:2000 | Identical |
| DIN EN 1213:1999-12 | Identical |
| I.S. EN 1213:2000 | Identical |
| DIN 3502:2002-10 | STOPVALVES FOR DOMESTIC WATER SUPPLY - TWO-WAY VALVES - OBLIQUE BONNET TYPE PN 10; Y-TYPE VALVE - TECHNICAL RULE OF THE DVGW |
| DIN 3546-1:2011-01 | Stop valves for domestic water supply - Part 1: General requirements and tests for manually operated piston type gate valves of special design, gate valves and diaphragm valves, Technical rule of the DVGW |
| DIN 3512:2002-10 | STOPVALVES FOR DOMESTIC WATER SUPPLY - TWO-WAY VALVES - VERTICAL BONNET TYPE PN 10; STRAIGHT PATTERN GLOBE VALVE |
| BS EN 806-2:2005 | Specifications for installations inside buildings conveying water for human consumption Design |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| UNI EN 806-2 : 2008 | SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN |
| DIN EN 806-2:2005-06 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| ISO 3822-1:1999 | Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement |
| EN 1254-3:1998 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 6509:1981 | Corrosion of metals and alloys Determination of dezincification resistance of brass |
| ISO 3822-3:1997 | Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 3: Mounting and operating conditions for in-line valves and appliances |
| EN 200:2008 | Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification |
| EN 12420:2014 | Copper and copper alloys - Forgings |
| EN ISO 6509:1995 | Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.