EN 13523-10:2017
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
Withdrawn date
31-08-2017
Published date
22-02-2017
Publisher
Sorry this product is not available in your region.
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus and materials
6 Sampling
7 Test panels
8 Procedure
9 Expression of results
10 Precision
11 Test report
Bibliography
This part of the EN 13523 series specifies the basic principles and procedure for determining the resistance of an organic coating on a metallic substrate (coil coating) to a combination of fluorescent UV radiation, and water condensation and temperature under controlled conditions.Due to varied conditions which occur during natural weathering and the extreme nature of accelerated testing, correlation between the two cannot be expected.Not all organic coatings will perform on an equal basis but a degree of correlation between the same generic type might be observed.
| Committee |
CEN/TC 139
|
| DevelopmentNote |
Supersedes PREN 13523-10. (02/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| DIN EN 13523-10:2017-05 | Identical |
| NBN EN 13523-10 : 2010 | Identical |
| NEN EN 13523-10 : 2017 | Identical |
| I.S. EN 13523-10:2017 | Identical |
| UNI EN 13523-10 : 2010 | Identical |
| DIN EN 13523-10:2015-12 (Draft) | Identical |
| PN EN 13523-10 : 2017 | Identical |
| SN EN 13523-10:2017 | Identical |
| BS EN 13523-10:2017 | Identical |
| NF EN 13523-10 : 2017 | Identical |
| SN EN 13523-10 : 2010 | Identical |
| UNE-EN 13523-10:2017 | Identical |
| NS EN 13523-10 : 2017 | Identical |
| ONORM EN 13523-10 : 2017 | Identical |
| DS EN 13523-10 : 2017 | Identical |
| I.S. EN 10169-2:2006 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| 08/30175210 DC : DRAFT APR 2008 | BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| I.S. EN 10169:2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 1396:2015-06 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| BS EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods) |
| EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
| EN 13523-14:2014 | Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| 12/30268967 DC : 0 | BS EN 13523-14 - COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD) |
| 13/30286946 DC : 0 | BS EN 1396 - ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| BS EN 10169 : 2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 1396:2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| DIN EN 10169-2:2006-07 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| DIN EN 10169-1:2004-04 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| I.S. EN 13523-14:2014 | COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD) |
| I.S. EN 10169-1:2004 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| DIN EN 13523-14:2014-08 | Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
| BS EN 1396:2007 | Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications |
| UNI EN 13523-14 : 2014 | COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD) |
| BS EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products Products for building exterior applications |
| UNE-EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| UNE-EN 10169:2011 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| 08/30188146 DC : 0 | BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10169:2012-06 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012) |
| 02/713103 DC : DRAFT NOV 2002 | PREN 10169-1 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| PREN 1396 : DRAFT 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| UNI EN 10169 : 2012 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 13523-14:2014 | Coil coated metals. Test methods Chalking (Helmen method) |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| EN 23270:1991 | Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (ISO 3270:1984) |
| EN 13523-14:2014 | Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| EN 13523-0:2014 | Coil coated metals - Test methods - Part 0: General introduction |
| EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| ISO 16474-3:2013 | Paints and varnishes Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps |
| EN ISO 16474-3:2013 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013) |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.