EN 14034-1:2004+A1:2011
Current
Current
The latest, up-to-date edition.
Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds
Published date
12-01-2011
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Test apparatus
5 Dust sample
6 Test procedure
7 Calibration and verification
8 Safety precautions/instructions for use
9 Alternative test equipment/procedures
10 Test report
Annex A (normative) - Electro pneumatic valve
Annex B (normative) - Dust disperser with 5 mm holes
Annex C (normative) - 20 l sphere
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 94/9/EC
Bibliography
This document describes a test method for the determination of the maximum explosion pressure of dust clouds in a closed vessel under defined initial conditions of pressure and temperature. This method is not suitable for use with recognised explosives, like gunpowder and dynamite, substances which do not require oxygen for combustion, pyrophoric substances, or substances or mixtures of substances which may under some circumstances behave in a similar manner. Where any doubt exists about the existence of hazard due to explosive properties, expert advice should be sought.
| Committee |
CEN/TC 305
|
| DevelopmentNote |
2004 Edition Re-Issued in January 2011 & incorporates AMD 1 2011. (01/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 14034-1 : 2005 + A1 2011 | Identical |
| BS EN 14034-1 : 2004 | Identical |
| SN EN 14034-1+A1:2011 | Identical |
| UNI EN 14034-1 : 2011 | Identical |
| NBN EN 14034-1 : 2004 + A1 2011 | Identical |
| I.S. EN 14034-1:2004 | Identical |
| NEN EN 14034-1 : 2004 + A1 2011 | Identical |
| PN EN 14034-1 : 2005 + A1 2011 | Identical |
| NS EN 14034-1 : 2004 + A1 2011 | Identical |
| UNE-EN 14034-1:2005 | Identical |
| UNE-EN 14034-1:2005+A1:2011 | Identical |
| DIN EN 14034-1:2011-04 | Identical |
| BS EN 14034-1:2004+A1:2011 | Identical |
| PREN 1127-1 : DRAFT 2017 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| 09/30198043 DC : 0 | BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| UNI EN 13237 : 2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| 11/30239006 DC : 0 | BS EN 13237 - POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| UNE-EN 15089:2010 | Explosion isolation systems |
| 17/30365866 DC : 0 | BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| DIN EN ISO/IEC 80079-20-2 E : 2016 COR 1 2018 | EXPLOSIVE ATMOSPHERES - PART 20-2: MATERIAL CHARACTERISTICS - COMBUSTIBLE DUSTS TEST METHODS (ISO/IEC 80079-20-2:2016) |
| I.S. EN 16009:2011 | FLAMELESS EXPLOSION VENTING DEVICES |
| UNE-EN 1127-1:2012 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| BS EN 14373:2005 | Explosion suppression systems |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| EN 14373:2005 | Explosion suppression systems |
| I.S. CEN TR 15473:0 | CHARACTERIZATION OF SLUDGES - GOOD PRACTICE FOR SLUDGES DRYING |
| PREN 14491 : DRAFT 2011 | DUST EXPLOSION VENTING PROTECTIVE SYSTEMS |
| 12/30267131 DC : 0 | BS EN 16447 - EXPLOSION ISOLATION FLAP VALVES |
| BS EN 16020:2011 | Explosion diverters |
| 11/30247683 DC : 0 | PREN 14491 REV - DUST EXPLOSION VENTING PROTECTIVE SYSTEMS |
| S.R. CEN/TR 16829:2016 | FIRE AND EXPLOSION PREVENTION AND PROTECTION FOR BUCKET ELEVATORS |
| I.S. EN 16020:2011 | EXPLOSION DIVERTERS |
| UNI EN 16009 : 2011 | FLAMELESS EXPLOSION VENTING DEVICES |
| BS EN 1127-1:2019 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
| BS EN 1127-1:2011 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
| NF EN 1127-1 : 2011 | EXPLOSIVES ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| DIN EN 14491:2012-10 | Dust explosion venting protective systems |
| I.S. EN 13237:2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| I.S. EN 14034-4:2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS |
| DIN EN 1127-1:2011-10 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| DIN EN 14034-4:2011-04 | Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds (includes Amendment A1:2011) |
| I.S. EN 14491:2012 | DUST EXPLOSION VENTING PROTECTIVE SYSTEMS |
| VDI 2263 Blatt 5:2014-10 | Dust fires and dust explosions - Hazards, assessment, protective measures - Explosion protection in fluidized bed dryers |
| VDI 2262 Blatt 1:2013-06 | Workplace air - Reduction of exposure to air pollutants - Legal principles, terms and definitions, basic organisational measures for industrial safety and environmental protection |
| VDI 2263 Blatt 6:2017-08 | Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in dust extracting installations |
| 09/30209992 DC : 0 | BS EN 16020 - EXPLOSION DIVERTERS |
| DIN EN 15089:2009-07 | EXPLOSION ISOLATION SYSTEMS |
| PD CEN/TR 15473:2007 | Characterization of sludges. Good practice for sludges drying |
| BS EN 15089:2009 | Explosion isolation systems |
| UNI EN 15089 : 2009 | EXPLOSION ISOLATION SYSTEMS |
| ONORM EN 14373 : 2006 | EXPLOSION SUPPRESSION SYSTEMS |
| UNI EN 14491 : 2012 | DUST EXPLOSION VENTING PROTECTIVE SYSTEMS |
| UNI EN 14034-4 : 2011 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS |
| ISO/IEC 80079-20-2:2016 | Explosive atmospheres Part 20-2: Material characteristics Combustible dusts test methods |
| 09/30208493 DC : 0 | BS EN 16009 - FLAMELESS EXPLOSION VENTING DEVICES (TYPE C STANDARD) |
| 14/30302627 DC : 0 | BS ISO IEC 80079-20-2 - EXPLOSIVE ATMOSPHERES - PART 20-2: MATERIAL CHARACTERISTICS COMBUSTIBLE DUSTS TEST METHODS |
| UNI EN 1127-1 : 2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| UNI EN 16020 : 2012 | EXPLOSION DIVERTERS |
| I.S. EN 1127-1:2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| I.S. EN 14460:2018 | EXPLOSION RESISTANT EQUIPMENT |
| I.S. EN ISO/IEC 80079-20-2:2016 | EXPLOSIVE ATMOSPHERES - PART 20-2: MATERIAL CHARACTERISTICS - COMBUSTIBLE DUSTS TEST METHODS (ISO/IEC 80079-20-2:2016) |
| EN 14460:2018 | Explosion resistant equipment |
| BS EN 14034-4 : 2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS |
| BS EN 14491:2012 | Dust explosion venting protective systems |
| BS EN 13237:2012 | Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| EN 14491:2012 | Dust explosion venting protective systems |
| EN 16009:2011 | Flameless explosion venting devices |
| EN 16020:2011 | Explosion diverters |
| EN 15089:2009 | Explosion isolation systems |
| EN 14034-4:2004+A1:2011 | Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
| NF EN 16020 : 2011 | EXPLOSION DIVERTERS |
| BS EN 16009:2011 | Flameless explosion venting devices |
| I.S. EN 15089:2009 | EXPLOSION ISOLATION SYSTEMS |
| DIN EN 16009:2011-10 | Flameless explosion venting devices |
| DIN EN 16020:2011-10 | Explosion diverters |
| DIN EN 13237:2013-01 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| CEN/TR 15473:2007 | Characterization of sludges - Good practice for sludges drying |
| DIN EN 14373:2006-01 | Explosion suppression systems |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| I.S. EN 14373:2005 | EXPLOSION SUPPRESSION SYSTEMS |
| UNE-EN 14034-4:2005 | Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
| ISO 4225:1994 | Air quality General aspects Vocabulary |
| EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
| EN 26184-1 : 1991 | EXPLOSION PROTECTION SYSTEMS - DETERMINATION OF EXPLOSION INDICES OF COMBUSTIBLE DUSTS IN AIR |
| VDI 2263 Blatt 1:1990-05 | Dust fires and dust explosions; hazards, assessment, protective measures; test methods for the determination of the safety characteristic of dusts |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.