EN 1443:2003
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Chimneys - General requirements
Superseded date
02-05-2019
Superseded by
Published date
05-03-2003
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation and other essential information
4.1 General
4.2 Temperature classes
4.3 Pressure classes
4.4 Condensate resistance classes
4.5 Corrosion resistance classes
4.6 Sootfire resistance classes
4.7 Distance to combustible material
4.8 Thermal resistance
4.9 Freeze-thaw resistance
4.10 Resistance to fire
4.10.1 Internal to external
4.10.2 External to external
4.11 Designation
4.12 Essential additional information
5 Dimensions, shape and tolerances
6 Requirements
6.1 General
6.2 Mechanical resistance and stability
6.3 Thermal behaviour
6.3.1 Heat resistance
6.3.2 Ssotfire resistance
6.3.3 Resistance to fire
6.3.4 Reaction to fire
6.4 Hygiene, health and environment
6.4.1 Gastightness
6.4.2 Water vapour diffusion resistance and condensate
resistance
6.4.3 Corrosion resistance
6.5 Safety in use
6.6 Energy economy and heat reduction
6.7 Additional criteria for chimney operation
6.7.1 Apertures for cleaning and inspection
6.7.2 Water penetration
6.7.3 Aerodynamic properties of terminal
6.7.4 Condensate collection and removal
6.7.5 Flow resistance
7 Marking, labelling and instruction
7.1 General
7.2 Chimney component
7.3 Chimney
7.4 Product information
8 Evaluation of conformity
Annex A (informative) Relevance of performance requirements to
system chimneys and custom-built chimneys related to
test methods or prior knowledge
Annex B (informative) Characteristics for chimneys
Bibliography
This European Standard specifies general requirements and the basic performance criteria and specifies limit values where appropriate for chimneys (including connecting flue pipes and their fittings) used to convey the products of combustion from heating appliances to the outside atmosphere. It is intended to be used as a reference for product standards for chimneys, flues and specific products (elements, kits and terminals) used in the construction of chimneys. It also identifies minimum requirements for marking and evaluation of conformity.It does not apply to structurally independent chimneys.NOTEThis European Standard can be used as a basis for the specifications of products covered by a European Technical Approval.
| Committee |
CEN/TC 166
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NBN EN 1443 : 2003 | Identical |
| PN EN 1443 : 2005 | Identical |
| UNI EN 1443 : 2005 | Identical |
| PN-EN 1443:2019-05 | Identical |
| SN EN 1443 : 2003 | Identical |
| I.S. EN 1443:2019 | Identical |
| DIN EN 1443:2003-06 | Identical |
| NF EN 1443 : 2003 | Identical |
| NEN EN 1443 : 2003 | Identical |
| ONORM EN 1443 : 2003 | Identical |
| NS EN 1443 : 2ED 2003 | Identical |
| BS EN 1443:2003 | Identical |
| UNE-EN 1443:2003 | Identical |
| I.S. EN 1443:2003 | Identical |
| DIN EN 15287-1:2010-12 | Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances (includes Amendment A1:2010) |
| 02/103631 DC : DRAFT MAY 2002 | BS EN 14471 - CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS |
| 07/30170132 DC : 0 | BS EN 1859 - CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
| 13/30272405 DC : 0 | BS EN 13384-1 REV - CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 1: CHIMNEYS SERVING ONE HEATING APPLIANCE |
| I.S. EN 12391-1:2004 | CHIMNEYS - EXECUTION STANDARD FOR METAL CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES |
| I.S. EN 1457:1999 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13384-2:2015-06 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 2: CHIMNEYS SERVING MORE THAN ONE HEATING APPLIANCE |
| BS EN 13216-1:2004 | Chimneys. Test methods for system chimneys General test methods |
| PD CEN/TR 1749:2014 | European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
| 04/30122093 DC : 0 | EN 14989-2 - CHIMNEYS AND AIR SUPPLY DUCT SYSTEMS FOR ROOM SEALED APPLIANCES - REQUIREMENTS AND TEST METHODS - PART 2: FLUE AND AIR SUPPLY DUCTS FOR INDIVIDUAL ROOM SEALED APPLIANCES |
| BS EN 16475-3 : 2016 | CHIMNEYS - ACCESSORIES - PART 3: DRAUGHT REGULATORS, STANDSTILL OPENING DEVICES AND COMBINED SECONDARY AIR DEVICES - REQUIREMENTS AND TEST METHODS |
| PREN 13384-1 : DRAFT 2013 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 1: CHIMNEYS SERVING ONE HEATING APPLIANCE |
| PREN 1859 : DRAFT 2008 | CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
| 02/103630 DC : DRAFT MAY 2002 | PREN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| 02/104192 DC : DRAFT JUN 2002 | EN 1856-1 - CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
| EN 13216-1:2004 | Chimneys - Test methods for system chimneys - Part 1: General test methods |
| 17/30353865 DC : 0 | BS EN 1443 - CHIMNEYS - GENERAL REQUIREMENTS |
| I.S. EN 14989-2:2007 | CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR METAL CHIMNEYS AND MATERIAL INDEPENDENT AIR SUPPLY DUCTS FOR ROOM SEALED HEATING APPLICATIONS - PART 2: FLUE AND AIR SUPPLY DUCTS FOR ROOM SEALED APPLIANCES |
| 17/30339852 DC : 0 | BS EN 1366-13 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 13: CHIMNEYS |
| EN 13384-1:2015 | Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance |
| UNI EN 1457-1 : 2012 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1457-2:2012 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14241-1:2013-11 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| DIN EN 13084-6:2016-02 | FREE-STANDING CHIMNEYS - PART 6: STEEL LINERS - DESIGN AND EXECUTION |
| DIN EN 26:2015-08 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| BS EN 13063-2:2005 | Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods under wet conditions |
| BS EN 14471 : 2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| BS EN 13063-3:2007 | Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for air flue system chimneys |
| BS EN 1856-1:2009 | Chimneys. Requirements for metal chimneys System chimney products |
| UNE-EN 14989-2:2011 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances |
| BS EN 13084-6:2015 | Free-standing chimneys Steel liners. Design and execution |
| BS EN 14241-1:2013 | Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods Seals in flue liners |
| BS EN 14989-1:2007 | Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Vertical air/flue terminals for C6-type appliances |
| EN 13384-3:2005 | Chimneys - Thermal and fluid dynamic calculation methods - Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance |
| DIN EN 15034:2007-01 | EATING BOILERS - CONDENSING HEATING BOILERS FOR FUEL OIL |
| EN 13069:2005 | Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods |
| DIN EN 13063-3:2007-10 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS |
| EN 12391-1:2003 | Chimneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances |
| CEN/TS 16134:2011 | Chimney terminals - General requirements and material independent test methods |
| EN 13063-1:2005+A1:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance |
| BS EN 1457:1999 | Chimneys. Clay/ceramic flue liners. Requirements and test methods |
| I.S. EN 16475-2:2017 | CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS |
| 02/102804 DC : DRAFT APR 2002 | PREN 13063-1 - CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE |
| I.S. EN 483:2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| DIN EN 16475-2:2013-08 (Draft) | CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 16134:2011 | CHIMNEY TERMINALS - GENARAL REQUIREMENTS AND MATERIAL INDEPENDENT TEST METHODS |
| UNE-EN 1457-2:2013 | Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods |
| BS EN 16497-2:2017 | Chimneys. Concrete System Chimneys Balanced flue applications |
| 06/30150462 DC : 0 | EN 15287-2 - CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOMSEALED APPLIANCES |
| 10/30217031 DC : 0 | EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| 16/30332891 DC : DRAFT JAN 2016 | BS EN 16475-6 - CHIMNEYS - ACCESSORIES - PART 6: ACCESS COMPONENTS - REQUIREMENTS AND TEST METHODS |
| PD CEN/TR 16940:2016 | Domestic gas installations. Recommendations for safety |
| 11/30250546 DC : 0 | BS EN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| 11/30250549 DC : 0 | BS EN 14471 - CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| 08/30185757 DC : 0 | BS EN 1856-2 - CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 2: METAL FLUE LINERS AND CONNECTING FLUE PIPES |
| 04/30122801 DC : DRAFT SEP 2004 | EN 15034 - HEATING BOILERS - CONDENSING HEATING BOILERS FOR FUEL OIL |
| PREN 14241-1 : DRAFT 2011 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| CEN/TR 16940:2016 | Domestic gas installations - Recommendations for safety |
| DIN EN 16475-7:2016-05 | CHIMNEYS - ACCESSORIES - PART 7: RAIN CAPS - REQUIREMENTS AND TEST METHODS |
| PREN 14471 : DRAFT 2011 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 15287-1 : 2010 | CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES |
| UNI EN 15287-2 : 2008 | CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOM-SEALED APPLIANCES |
| DIN EN 13384-1:2015-06 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 1: CHIMNEYS SERVING ONE HEATING APPLIANCE |
| PREN 50465 : DRAFT 2011 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| S.R. CEN/TR 16940:2016 | DOMESTIC GAS INSTALLATIONS - RECOMMENDATIONS FOR SAFETY |
| I.S. EN 13384-2:2015 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 2: CHIMNEYS SERVING MORE THAN ONE HEATING APPLIANCE |
| DIN EN 203-1:2014-07 | Gas heated catering equipment - Part 1: General safety rules |
| DIN EN 13384-3:2006-03 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 3: METHODS FOR THE DEVELOPMENT OF DIAGRAMS AND TABLES FOR CHIMNEYS SERVING ONE HEATING APPLIANCE |
| DIN EN 1858:2016-08 (Draft) | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| DIN EN 13084-8:2005-08 | FREE-STANDING INDUSTRIAL CHIMNEYS - PART 8: DESIGN AND EXECUTION OF MAST CONSTRUCTION WITH SATELLITE COMPONENTS |
| DIN EN 1856-2:2009-09 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 2: METAL FLUE LINERS AND CONNECTING FLUE PIPES |
| DIN EN 14471:2015-03 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| BS EN 26:1998 | Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners |
| BS EN 13084-5:2005 | Free-standing chimneys Material for brick liners. Product specifications |
| BS EN 13502:2002 | Chimneys. Requirements and test methods for clay/ceramic flue terminals |
| EN 16475-7:2016 | Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods |
| I.S. EN 14471:2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1858:2008 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| I.S. EN 13063-2:2005 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS |
| I.S. EN 1806:2006 | CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS |
| DIN EN 12391-1:2004-04 | CHIMNEYS - EXECUTION STANDARD FOR METAL CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOM SEALED HEATING APPLIANCES |
| DIN EN 1859:2013-07 | Chimneys - Metal chimneys - Test methods (includes Amendment A1:2013) |
| I.S. EN 1856-2:2009 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 2: METAL FLUE LINERS AND CONNECTING FLUE PIPES |
| I.S. EN 12446:2011 | CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| DIN EN 13084-1:2007-05 | Free-standing chimneys - Part 1: General requirements |
| I.S. EN 26:2015 | GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| DIN EN 1857:2010-08 | Chimneys - Components - Concrete flue liners |
| I.S. EN 203-1:2014 | GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES |
| I.S. EN 13063-1:2006 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE |
| I.S. EN 14241-1:2013 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| I.S. EN 13084-6:2015 | FREE-STANDING CHIMNEYS - PART 6: STEEL LINERS - DESIGN AND EXECUTION |
| I.S. EN 13084-1:2007 | FREE-STANDING CHIMNEYS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 1856-1:2009 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
| DIN EN 13069:2005-12 | Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods |
| I.S. EN 1857:2010 | CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
| I.S. EN 1859:2009 | CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
| VDI 2035 Blatt 3:2014-07 | Prevention of damage in water heating installations - Corrosion by fuel gases |
| 07/30170129 DC : 0 | BS EN 1856-1 - CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
| UNI CEN/TR 1749 : 2015 | EUROPEAN SCHEME FOR THE CLASSIFICATION OF GAS APPLIANCES ACCORDING TO THE METHOD OF EVACUATION OF THE COMBUSTION PRODUCTS (TYPES) |
| BS EN 15287-2:2008 | Chimneys. Design, installation and commissioning of chimneys Chimneys for roomsealed appliances |
| 08/30194290 DC : 0 | BS EN 1856-1 - CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
| 03/116475 DC : DRAFT OCT 2003 | BS EN 13384-3 - CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 3: METHODS FOR THE DEVELOPMENT OF DIAGRAMS AND TABLES FOR CHIMNEYS SERVING ONE HEATING APPLIANCE |
| 04/30122798 DC : DRAFT SEP 2004 | EN 15035 - HEATING BOILERS - ROOM SEALED OPERATIONS FOR BOILERS FOR FUEL OIL |
| I.S. EN 15034:2006 | HEATING BOILERS - CONDENSING HEATING BOILERS FOR FUEL OIL |
| UNE-EN 1457-1:2013 | Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods |
| BS EN 16475-7:2016 | Chimneys. Accessories Rain caps. Requirements and test methods |
| I.S. EN 1443:2003 | CHIMNEYS - GENERAL REQUIREMENTS |
| BS EN 16497-1:2015 | Chimneys. Concrete System Chimneys Non-balanced flue applications |
| I.S. EN 16497-1:2015 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
| 05/30136031 DC : 0 | EN 15287-1 - CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES |
| BS EN 15287-1 : 2007 | CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES |
| I.S. EN 1457-1:2012 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS |
| 16/30338243 DC | BS EN 1457-2. Chimneys. Clay/ceramic flue liners. Part 2. Flue liners operating under wet conditions. Requirements and test methods |
| PREN 13384-2 : DRAFT 2013 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 2: CHIMNEYS SERVING MORE THAN ONE HEATING APPLIANCE |
| PREN 26 : DRAFT 2012 | GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| EN 13384-2:2015 | Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance |
| DIN EN 1457-2:2016-10 (Draft) | Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods; German and English version prEN 1457-2:2016 |
| PREN 1443 : DRAFT 2017 | CHIMNEYS - GENERAL REQUIREMENTS |
| UNI EN 1457-2 : 2012 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS |
| BS EN 13384-1 : 2002 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 1: CHIMNEYS SERVING ONE HEATING APPLIANCE |
| S.R. CEN/TS 16134:2011 | CHIMNEY TERMINALS - GENERAL REQUIREMENTS AND MATERIAL INDEPENDENT TEST METHODS |
| DIN EN 13084-5:2005-12 | Free-standing chimneys - Part 5: Material for brick liners - Product specifications |
| DIN EN 12446:2011-09 | Chimneys - Components - Concrete outer wall elements |
| DIN EN 1856-1:2009-09 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
| UNE-EN 13084-6:2016 | Free-standing chimneys - Part 6: Steel liners - Design and execution |
| BS EN 15034:2006 | Heating boilers. Condensing heating boilers for fuel oil |
| BS EN 13069:2005 | Chimneys. Clay/ceramic outer walls for system chimneys. Requirements and test methods |
| BS EN 13384-3:2005 | Chimneys. Thermal and fluid dynamic calculation methods Methods for the development of diagrams and tables for chimneys serving one heating appliance |
| UNE-EN 1856-1:2010 | Chimneys - Requirements for metal chimneys - Part 1: System chimney products |
| UNE-EN 13384-2:2016 | Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance |
| DIN EN 1858:2011-09 | Chimneys - Components - Concrete flue blocks |
| UNI EN 1856-1 : 2009 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
| UNI EN 13084-5 : 2005 | FREE-STANDING CHIMNEYS - PART 5: MATERIAL FOR BRICK LINERS - PRODUCT SPECIFICATIONS |
| UNI EN 1856-2 : 2009 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 2: METAL FLUE LINERS AND CONNECTING FLUE PIPES |
| UNI EN 1857 : 2010 | CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
| UNI EN 15034 : 2007 | HEATING BOILERS - CONDENSING HEATING BOILERS FOR FUEL OIL |
| UNI EN 1859 : 2013 | CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
| UNI EN 14241-1 : 2013 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| UNI EN 13384-3 : 2006 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 3: METHODS FOR THE DEVELOPMENT OF DIAGRAMS AND TABLES FOR CHIMNEYS SERVING ONE HEATING APPLIANCE |
| UNI EN 1858 : 2012 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| UNI EN 12446 : 2011 | CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| 04/30111056 DC : DRAFT MARCH 2004 | EN 1806 - CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS |
| DIN EN 16497-1:2015-05 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
| BS EN 14989-2:2007 | Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Flue and air supply ducts for room sealed appliances |
| 08/30183125 DC : 0 | BS EN 1857 - CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
| 12/30254956 DC : 0 | BS EN 26 - GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| 02/104193 DC : DRAFT JUN 2002 | PREN 13063-2 - CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS |
| 10/30239602 DC : DRAFT DEC 2010 | BS EN 1457-2 - CHIMNEY - CLAY CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS |
| BS EN 1457-2:2012 | Chimneys. Clay/ceramic flue liners Flue liners operating under wet conditions. Requirements and test methods |
| 08/30187751 DC : 0 | BS EN 1457-1 - CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS |
| 14/30304113 DC : 0 | BS EN 16497-2 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS |
| 01/106321 DC : DRAFT AUG 2001 | PREN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| 07/30156249 DC : 0 | BS EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| 07/30156246 DC : 0 | BS EN 1858 - CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| 16/30338240 DC | BS EN 1457-1. Chimney. Clay/ceramic flue liners. Part 1. Flue liners operating under dry conditions. Requirements and test methods |
| NF EN 15287-1 : 2007 + A1 2010 | CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES |
| 15/30319697 DC : 0 | BS EN 16854 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF SOOT FIRE RESISTANCE OF THERMAL INSULATION PRODUCTS FOR THE USE IN CHIMNEYS |
| I.S. EN 15287-2:2008 | CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOMSEALED APPLIANCES |
| DIN EN ISO 20137:2015-01 (Draft) | LEATHER - CHEMICAL TESTS - GUIDELINES FOR TESTING CRITICAL CHEMICALS IN LEATHER (ISO 20137:2017) |
| 16/30344390 DC : 0 | BS EN 13216-1 - CHIMNEYS - TEST METHODS FOR SYSTEM CHIMNEYS - PART 1: GENERAL TEST METHODS |
| 16/30344387 DC : 0 | BS EN 16475-1 - CHIMNEYS - ACCESSORIES - PART 1: CHIMNEY SILENCERS - REQUIREMENTS AND TEST METHODS |
| PREN 13216-1 : DRAFT 2016 | CHIMNEYS - TEST METHODS FOR SYSTEM CHIMNEYS - PART 1: GENERAL TEST METHODS |
| I.S. EN 13216-1:2004 | CHIMNEYS - TEST METHODS FOR SYSTEM CHIMNEYS - PART 1: GENERAL TEST METHODS |
| BS EN 15035:2006 | Heating boilers. Special requirements for oil fired room sealed units up to 70 kW |
| UNE-EN 1857:2013 | Chimneys - Components - Concrete flue liners |
| BS EN 1806:2006 | Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods |
| BS EN 1858 : 2008 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| UNE-EN 13384-1:2016 | Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance |
| BS EN 1856-2:2009 | Chimneys. Requirements for metal chimneys Metal flue liners and connecting flue pipes |
| BS EN 13084-8:2005 | Free-standing industrial chimneys Design and execution of mast construction with satellite components |
| BS EN 1857 : 2003 | CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
| UNE-EN 12446:2012 | Chimneys - Components - Concrete outer wall elements |
| BS EN 13063-1:2005 | Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for sootfire resistance |
| BS EN 203-1:2014 | Gas heated catering equipment General safety rules |
| BS EN 483 : 2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| UNE EN 15287-1 : 0 | CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES |
| UNE-EN 1858:2011 | Chimneys - Components - Concrete flue blocks |
| BS EN 12391-1:2003 | Chimneys. Execution standard for metal chimneys Chimneys for non-roomsealed heating appliances |
| UNE-EN 1856-2:2010 | Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes |
| UNE-EN 1859:2010 | Chimneys - Metal chimneys - Test methods |
| UNE-EN 26:2016 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| BS EN 13084-1:2007 | Free-standing chimneys General requirements |
| EN 16497-2:2017 | Chimneys - Concrete System Chimneys - Part 2: Balanced flue applications |
| EN 14471:2013+A1:2015 | Chimneys - System chimneys with plastic flue liners - Requirements and test methods |
| EN 14989-2:2007 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances |
| EN 14241-1:2013 | Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
| EN 14989-1:2007 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances |
| EN 15287-2:2008 | Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances |
| EN 15035:2006 | Heating boilers - Special requirements for oil fired room sealed units up to 70 kW |
| EN 1857:2010 | Chimneys - Components - Concrete flue liners |
| EN 26:2015 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| EN 1858:2008+A1:2011 | Chimneys - Components - Concrete flue blocks |
| EN 1457-1:2012 | Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods |
| EN 1856-2:2009 | Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes |
| EN 1856-1:2009 | Chimneys - Requirements for metal chimneys - Part 1: System chimney products |
| EN 16475-2:2017 | Chimneys - Accessories - Part 2: Chimney fans - Requirements and test methods |
| EN 16497-1:2015 | Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applications |
| EN 1859:2009+A1:2013 | Chimneys - Metal chimneys - Test methods |
| EN 1457-2:2012 | Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods |
| EN 1806:2006 | Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods |
| UNI EN 203-1 : 2014 | GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES |
| DIN EN 15287-2:2008-06 | Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances |
| PREN 13063-1 : DRAFT 2002 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE |
| I.S. EN 16475-3:2016 | CHIMNEYS - ACCESSORIES - PART 3: DRAUGHT REGULATORS, STANDSTILL OPENING DEVICES AND COMBINED SECONDARY AIR DEVICES - REQUIREMENTS AND TEST METHODS |
| 12/30266154 DC : 0 | BS EN 16497-1 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
| 13/30272402 DC : 0 | BS EN 16475-3 - CHIMNEYS - ACCESSORIES - PART 3: DRAUGHT REGULATORS AND STANDSTILL OPENING DEVICES - REQUIREMENTS AND TEST METHODS |
| 08/30194466 DC : 0 | BS EN 1859 - CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
| BS EN 16475-2:2017 | Chimneys. Accessories Chimney fans. Requirements and test methods |
| I.S. EN 15287-1:2007 | CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES |
| I.S. EN 13384-1:2015 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 1: CHIMNEYS SERVING ONE HEATING APPLIANCE |
| DIN EN 16497-2:2017-07 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS |
| 11/30249911 DC : 0 | BS EN 50465 - GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| BS EN 13384-2 : 2003 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 2: CHIMNEYS SERVING MORE THAN ONE HEATING APPLIANCE |
| 08/30187754 DC : 0 | BS EN 1457-2 - CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS |
| 13/30272408 DC : 0 | BS EN 13384-2 REV - CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 2: CHIMNEYS SERVING MORE THAN ONE HEATING APPLIANCE |
| BS EN 1457-1:2012 | Chimneys. Clay/ceramic flue liners Flue liners operating under dry conditions. Requirements and test methods |
| XP CEN/TS 16134 : 2011 XP | CHIMNEY TERMINALS - GENERAL REQUIREMENTS AND MATERIAL INDEPENDENT TEST METHODS |
| I.S. EN 16497-2:2017 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS |
| I.S. EN 13384-1:2015+A1:2019&LC:2019 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 1: CHIMNEYS SERVING ONE HEATING APPLIANCE |
| I.S. EN 16475-7:2016 | CHIMNEYS - ACCESSORIES - PART 7: RAIN CAPS - REQUIREMENTS AND TEST METHODS |
| DIN EN 1457-1:2016-10 (Draft) | Chimney - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods; German and English version prEN 1457-1:2016 |
| EN 16475-3:2016 | Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods |
| S.R. CEN/TR 1749:2014 | EUROPEAN SCHEME FOR THE CLASSIFICATION OF GAS APPLIANCES ACCORDING TO THE METHOD OF EVACUATION OF THE COMBUSTION PRODUCTS (TYPES) |
| DIN EN 13216-1:2004-11 | CHIMNEYS - TEST METHODS FOR SYSTEM CHIMNEYS - PART 1: GENERAL TEST METHODS |
| BS EN 12446:2011 | Chimneys. Components. Concrete outer wall elements |
| BS EN 1859 : 2009 | CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
| EN 13063-3:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys |
| EN 12446:2011 | Chimneys - Components - Concrete outer wall elements |
| EN 13063-2:2005+A1:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions |
| DIN EN 14989-2:2008-03 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances |
| EN 13084-1:2007 | Free-standing chimneys - Part 1: General requirements |
| CEN/TR 1749:2014 | European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
| DIN EN 13063-1:2007-10 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE |
| EN 15287-1:2007+A1:2010 | Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances |
| EN 13502:2002 | Chimneys - Requirements and test methods for clay/ceramic flue terminals |
| EN 13084-8:2005 | Free-standing industrial chimneys - Part 8: Design and execution of mast construction with satellite components |
| DIN EN 1457-1:2012-04 | Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods |
| DIN EN 13063-2:2007-10 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS |
| EN 13084-6:2015 | Free-standing chimneys - Part 6: Steel liners - Design and execution |
| DIN EN 14989-1:2007-05 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances |
| DIN EN 1457-2:2012-04 | Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods |
| DIN EN 15035:2007-05 | Heating boilers - Special requirements for oil fired room sealed units up to 70 kW |
| EN 1859:2009+A1:2013 | Chimneys - Metal chimneys - Test methods |
| PREN 13501-2 : DRAFT 2015 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES |
| PREN 13063-1 : DRAFT 2002 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| EN 1806:2006 | Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods |
| PREN 1856-2 : DRAFT 2008 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 2: METAL FLUE LINERS AND CONNECTING FLUE PIPES |
| PREN 1857 : DRAFT 2008 | CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
| PREN 13216-1 : DRAFT 2016 | CHIMNEYS - TEST METHODS FOR SYSTEM CHIMNEYS - PART 1: GENERAL TEST METHODS |
| PREN 13384-1 : DRAFT 2013 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 1: CHIMNEYS SERVING ONE HEATING APPLIANCE |
| PREN 1856-1 : DRAFT 2008 | CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
| PREN 13384-2 : DRAFT 2013 | CHIMNEYS - THERMAL AND FLUID DYNAMIC CALCULATION METHODS - PART 2: CHIMNEYS SERVING MORE THAN ONE HEATING APPLIANCE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.