EN 1504-7:2006
Current
The latest, up-to-date edition.
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
23-08-2006
1 Scope
2 Normative references
3 Terms and definitions
4 Performance characteristics for intended uses
5 Requirements
6 Sampling
7 Evaluation of conformity
8 Marking and labelling
Annex A (informative) Minimum frequency of testing for
factory production control
Annex B (informative) Release of dangerous substances
Annex ZA (informative) Clauses of this European Standard
addressing the provisions of the EU
Construction Products Directive
This Part of EN 1504 specifies requirements for the identification and the performance (including durability aspects) of products and systems for active and barrier coatings for protection of existing uncoated steel reinforcement and embedded steel in concrete structures under repair.This standard does not cover products for corrosion protection of pre-stressing steels and stainless steels.
Committee |
CEN/TC 104
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
NS EN 1504-7 : 1ED 2006 | Identical |
UNE-EN 1504-7:2007 | Identical |
BS EN 1504-7:2006 | Identical |
I.S. EN 1504-7:2007 | Identical |
NF EN 1504-7 : 2006 | Identical |
SN EN 1504-7 : 2006 | Identical |
UNI EN 1504-7 : 2007 | Identical |
NBN EN 1504-7 : 2007 | Identical |
DIN EN 1504-7:2015-09 (Draft) | Identical |
PN EN 1504-7 : 2007 | Identical |
NEN EN 1504-7 : 2006 | Identical |
DIN EN 1504-7:2006-11 | Identical |
BS EN 1504-9:2008 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity General principles for use of products and systems |
UNI EN 1504-9 : 2009 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
BS EN 15183:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test |
DD ENV 1504-9:1997 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control andevaluation of conformity General principles for the use of products and systems |
BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
BS EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and AVCP Quality control and Assessment and verification of the constancy of performance (AVCP) |
I.S. EN 1504-8:2016 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 8: QUALITY CONTROL AND ASSESSMENT AND VERIFICATION OF THE CONSTANCY OF PERFORMANCE (AVCP) |
PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
DIN EN 1504-9:2008-11 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPALS FOR THE USE OF PRODUCTS AND SYSTEMS |
I.S. EN 1504-9:2008 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
BS EN 15184:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Shear adhesion of coated steel to concrete (pull-out test) |
EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
EN 15184:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
EN 1504-9:2008 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
EN 15183:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
UNE-EN 1504-9:2011 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
DIN EN 1504-8:2016-08 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 8: QUALITY CONTROL AND ASSESSMENT AND VERIFICATION OF THE CONSTANCY OF PERFORMANCE (AVCP) |
DIN EN 15184:2006-11 | Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
DIN EN 15183:2006-11 | Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
ISO 3219:1993 | Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
EN 15183:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
EN 1767:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis |
EN 1015-4:1998 | Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration) |
EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
EN 1877-2:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number |
EN 13062:2003 | Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement |
ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
EN ISO 11358:1997 | Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997) |
EN ISO 3219:1994 | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
EN 1877-1:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent |
EN 1504-1:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
EN 12614:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
EN 15184:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
ENV 1504-9 : DRAFT 1997 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.