EN 1506:2007
Current
Current
The latest, up-to-date edition.
Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions
Published date
20-06-2007
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions and symbols
4 Dimensions and values for ducts
5 Dimensions for fittings
5.1 General
5.2 Joints
5.3 Bends
5.4 Branches and T-pieces
5.4.5 Transformation pieces
5.4.6 Closures
6 Tolerances and clearances
Annex A (informative) Examples of alternative designs
of ends and connectors
Bibliography
This European Standard specifies dimensions of ducts and duct fittings with circular cross- section. It applies to ductwork used in ventilating and air conditioning systems in buildings, subject to human occupancy. The wall thickness of ducts and fittings is not specified in this standard; strength and leakage are dealt with in EN 12237 [2].The corresponding standard for rectangular ducts is EN 1505 [1].
| Committee |
CEN/TC 156
|
| DevelopmentNote |
Supersedes PREN 1506. (12/2007)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 1506:2007-09 | Identical |
| I.S. EN 1506:2007 | Identical |
| UNE-EN 1506:2007 | Identical |
| NBN EN 1506 : 2007 | Identical |
| NEN EN 1506 : 2007 | Identical |
| PN EN 1506 : 2007 | Identical |
| NF EN 1506 : 2007 | Identical |
| BS EN 1506:2007 | Identical |
| NS EN 1506 : 2ED 2007 | Identical |
| UNI EN 1506 : 2008 | Identical |
| SN EN 1506 : 2007 | Identical |
| DIN 24152:1998-12 | Similar to |
| DIN 24147-1:1998-12 | Similar to |
| DIN 24151-1:1998-12 | Similar to |
| DIN 24151-2:1998-12 | Similar to |
| 07/30167140 DC : 0 | BS EN 15727 - VENTILATION FOR BUILDINGS - DUCTWORK - TECHNICAL DUCTWORK PRODUCTS, LEAKAGE CLASSIFICATION AND TESTING |
| 08/30162505 DC : DRAFT APR 2008 | BS EN 15780 - VENTILATION FOR BUILDINGS - DUCTWORK - CLEANLINESS OF VENTILATION SYSTEMS |
| I.S. EN 13779:2007 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| I.S. EN 12097:2006 | VENTILATION FOR BUILDINGS - DUCTWORK - REQUIREMENTS FOR DUCTWORK COMPONENTS TO FACILITATE MAINTENANCE OF DUCTWORK SYSTEMS |
| 09/30208460 DC : 0 | BS EN 15727 - VENTILATION FOR BUILDINGS - DUCTS AND DUCTWORK COMPONENTS, LEAKAGE CLASSIFICATION AND TESTING |
| DIN EN 15727:2010-10 | Ventilation for buildings - Ducts and ductwork components, leakage classification and testing |
| 17/30356593 DC : 0 | BS EN ISO 15138 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| NF EN 15727 : 2010 | VENTILATION FOR BUILDINGS - DUCTS AND DUCTWORK COMPONENTS, LEAKAGE CLASSIFICATION AND TESTING |
| UNI EN 15780 : 2011 | VENTILATION FOR BUILDINGS - DUCTWORK - CLEANLINESS OF VENTILATION SYSTEMS |
| UNI EN 1507 : 2008 | VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS WITH RECTANGULAR SECTION - REQUIREMENTS FOR STRENGTH AND LEAKAGE |
| BS EN 13141-2:2010 | Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust and supply air terminal devices |
| BS EN 1507:2006 | Ventilation for buildings. Sheet metal air ducts with rectangular section. Requirements for strength and leakage |
| BS EN 14239:2004 | Ventilation for buildings. Ductwork. Measurement of ductwork surface area |
| BS EN 13180:2002 | Ventilation for buildings. Ductwork. Dimensions and mechanical requirements for flexible ducts |
| EN 13180:2001 | Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts |
| EN 12237:2003 | Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts |
| EN 13141-2:2010 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| EN 12236:2002 | Ventilation for buildings - Ductwork hangers and supports - Requirements for strength |
| EN 12097:2006 | Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
| EN 12220:1998 | Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation |
| ONORM EN 12101-6 : 2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 6: SPECIFICATION FOR PRESSURE DIFFERENTIAL SYSTEMS - KITS |
| 03/316464 DC : DRAFT SEP 2003 | BS EN 14788 - VENTILATION FOR BUILDINGS - DESIGN AND DIMENSIONING OF RESIDENTIAL VENTILATION SYSTEMS |
| UNE-EN 15882-1:2013 | Extended application of results from fire resistance tests for service installations - Part 1: Ducts |
| UNI EN 15423 : 2008 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| BS EN 15727:2010 | Ventilation for buildings. Ducts and ductwork components, leakage classification and testing |
| BS EN 15423:2008 | Ventilation for buildings. Fire precaution for air distribution systems in buildings |
| PREN 16282-5 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| PD CEN/TR 16798-4:2017 | Energy performance of buildings. Ventilation for buildings Interpretation of the requirements in EN 16798-3. For non-residential buildings. Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) |
| PREN 13141-5 : DRAFT 2017 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 5: COWLS AND ROOF OUTLET TERMINAL DEVICES |
| I.S. EN ISO 15138:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| BS EN 15882-1 : 2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| I.S. EN 15727:2010 | VENTILATION FOR BUILDINGS - DUCTS AND DUCTWORK COMPONENTS, LEAKAGE CLASSIFICATION AND TESTING |
| I.S. EN 16282-5:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| EN 15882-1:2011+A1:2017 | Extended application of results from fire resistance tests for service installations - Part 1: Ducts |
| UNI EN ISO 15138 : 2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| DIN EN 1507:2006-07 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| DIN EN 12101-6:2005-09 | Smoke and heat control systems - Part 6: Specification for pressure differential systems, Kits |
| DIN EN 12237:2003-07 | VENTILATION FOR BUILDINGS - DUCTWORK - STRENGTH AND LEAKAGE OF CIRCULAR SHEET METAL DUCTS |
| DIN EN 1505:1998-02 | VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS AND FITTINGS WITH RECTANGULAR CROSS-SECTION - DIMENSIONS |
| DIN EN 13180:2002-03 | VENTILATION FOR BUILDINGS - DUCTWORK - DIMENSIONS AND MECHANICAL REQUIREMENTS FOR FLEXIBLE DUCTS |
| BS EN 1505:1998 | Ventilation for buildings. Sheet metal air ducts and fittings with rectangular cross-section. Dimensions |
| I.S. EN 13141-5:2004 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 5: COWLS AND ROOF OUTLET TERMINAL DEVICES |
| EN 13141-5:2004 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 5: Cowls and roof outlet terminal devices |
| DIN EN 13141-2:2010-12 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| I.S. EN 13141-2:2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| VDI 3805 Blatt 1:2011-10 | Product data exchange in the Building Services - Fundamentals |
| VDI 3803-1 : 2010 COR 2010 | AIR-CONDITIONING - CENTRAL AIR-CONDITIONING SYSTEMS - STRUCTURAL AND TECHNICAL PRINCIPLES (VDI VENTILATION CODE OF PRACTICE) |
| NF EN 12101-6 : 2005 | SMOKE AND HEAT CONTROL SYSTEMS - PART 6: SPECIFICATIONS FOR PRESSURE DIFFERENTIAL SYSTEMS - KITS |
| BS EN 16282-5:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air duct. Design and dimensioning |
| UNI EN 15727 : 2010 | VENTILATION FOR BUILDINGS - DUCTS AND DUCTWORK COMPONENTS, LEAKAGE CLASSIFICATION AND TESTING |
| UNE-EN 15780:2012 | Ventilation for buildings - Ductwork - Cleanliness of ventilation systems |
| I.S. EN 15780:2011 | VENTILATION FOR BUILDINGS - DUCTWORK - CLEANLINESS OF VENTILATION SYSTEMS |
| DIN EN 12220:1998-06 | VENTILATION FOR BUILDINGS - DUCTWORK - DIMENSIONS OF CIRCULAR FLANGES FOR GENERAL VENTILATION |
| UNE-EN 13141-2:2011 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| I.S. EN 12101-6:2005 | SMOKE AND HEAT CONTROL SYSTEMS - PART 6: SPECIFICATION FOR PRESSURE DIFFERENTIAL SYSTEMS - KITS |
| UNI EN 13141-2 : 2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| UNI EN 13779 : 2008 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| BS EN 15780:2011 | Ventilation for buildings. Ductwork. Cleanliness of ventilation systems |
| CEN/TR 16798-4:2017 | Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN 16798- 3 - For non-residential buildings - Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) |
| 11/30244204 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| 14/30303753 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| 01/541305 DC : DRAFT OCT 2001 | BS EN 12101-6 - SMOKE AND HEAT CONTROL SYSTEMS - PART 6: PRESSURE DIFFERENTIAL SYSTEMS - KITS |
| 06/30127203 DC : DRAFT OCT 2006 | ISO 15138 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR CONDITIONING |
| 05/30129351 DC : DRAFT FEB 2005 | EN 12097 - VENTILATION FOR BUILDINGS - DUCTWORK - REQUIREMENTS FOR DUCTWORK COMPONENTS TO FACILITATE MAINTENANCE OF DUCTWORK SYSTEMS |
| BS EN ISO 15138:2007 | Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning |
| EN ISO 15138:2007 | Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007) |
| BS EN 12101-6:2005 | Smoke and heat control systems Specification for pressure differential systems. Kits |
| BS EN 13141-5:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation Cowls and roof outlet terminal devices |
| BS EN 12236:2002 | Ventilation for buildings. Ductwork hangers and supports. Requirements for strength |
| BS EN 12237:2003 | Ventilation for buildings. Ductwork. Strength and leakage of circular sheet metal ducts |
| BS EN 13779:2007 | Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems |
| EN 15423:2008 | Ventilation for buildings - Fire precautions for air distribution systems in buildings |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| EN 1505:1997 | Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions |
| EN 16282-5:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct; Design and dimensioning |
| EN 14239:2004 | Ventilation for buildings - Ductwork - Measurement of ductwork surface area |
| EN 15727:2010 | Ventilation for buildings - Ducts and ductwork components, leakage classification and testing |
| EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| EN 15780:2011 | Ventilation for buildings - Ductwork - Cleanliness of ventilation systems |
| 05/30128661 DC : 0 | EN 13779 - VENTILATION FOR NON RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| UNE-EN 15727:2010 | Ventilation for buildings - Ducts and ductwork components, leakage classification and testing |
| 07/30162717 DC : 0 | BS EN 15080-10 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 10: FIRE RESISTING DUCTS |
| DIN EN 15423:2008-09 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| DIN EN 15780:2012-01 | Ventilation for buildings - Ductwork - Cleanliness of ventilation systems |
| 17/30332536 DC : 0 | BS EN 13141-5 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 5: COWLS AND ROOF OUTLET TERMINAL DEVICES |
| ISO 15138:2007 | Petroleum and natural gas industries Offshore production installations Heating, ventilation and air-conditioning |
| S.R. CEN/TR 16798-4:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 4: INTERPRETATION OF THE REQUIREMENTS IN EN 16798-3 - FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4) |
| I.S. EN 15882-1:2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| I.S. EN 15423:2008 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
| DIN EN 13141-5:2005-01 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 5: Cowls and roof outlet terminal devices |
| BS EN 12220:1998 | Ventilation for buildings. Ductwork. Dimensions of circular flanges for general ventilation |
| BS EN 12097:2006 | Ventilation for buildings. Requirements for ductwork components to facilitate maintenance of ductwork systems |
| DIN EN 13779:2007-09 | VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| DIN EN 14239:2004-04 | Ventilation for buildings - Ductwork - Measurement of ductwork surface area; German Version EN 14239:2004 |
| DIN EN 12097:2006-11 | Ventilation for buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
| EN 1505:1997 | Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| EN 12237:2003 | Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts |
| ISO 7807:1983 | Air distribution Straight circular sheet metal ducts with a lock type spiral seam and straight rectangular sheet metal ducts Dimensions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.