EN 15567-1:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements
29-02-2020
20-05-2015
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements
5 Test methods
6 Marking
7 Inspection and maintenance
8 Documents
Annex A (normative) - Minimum information to be included
in an arboreal assessment report
Annex B (normative) - Instructions for the use of the ropes
course
Annex C (informative) - Relevance of ISO 4309:2010
to EN 15567-1 for Ropes Courses
Annex D (informative) - Guidance on risk assessment
Bibliography
This European Standard applies to permanent and mobile ropes courses and their components.This European Standard specifies safety requirements for the design, construction, inspection and maintenance of ropes courses and their components.This European Standard does not apply to temporary ropes courses (see 3.3) and children's play grounds (see EN 1176 all parts).For the use of ropes courses EN 15567 2 applies.
| Committee |
CEN/TC 136
|
| DevelopmentNote |
Supersedes PREN 15567-1. (05/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN 15567-1:2015 | Identical |
| PN EN 15567-1 : 2015 | Identical |
| NS EN 15567-1 : 2007 | Identical |
| UNI EN 15567-1 : 2008 | Identical |
| SN EN 15567-1 : 2015 | Identical |
| NF EN 15567-1 : 2015 | Identical |
| NEN EN 15567-1 : 2015 | Identical |
| NBN EN 15567-1 : 2015 | Identical |
| UNI EN 15567-1:2015 | Identical |
| UNE-EN 15567-1:2015 | Identical |
| BS EN 15567-1:2015 | Identical |
| ONORM EN 15567-1 : JUL 2015 | Identical |
| DIN EN 15567-1:2015-08 | Identical |
| 13/30279680 DC : 0 | BS EN 15567-2 - SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS |
| BS EN 15567-2:2015 | Sports- and recreational facilities. Ropes courses Operation requirements |
| I.S. EN 15567-2:2015 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS |
| PREN 15567-2 : 2013 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS |
| 17/30354229 DC : 0 | BS EN 17109 - ROPES COURSES - INDIVIDUAL SAFETY SYSTEM - SAFETY REQUIREMENTS AND TEST METHODS |
| PREN 17109 : DRAFT 2017 | ROPES COURSES - INDIVIDUAL SAFETY SYSTEM - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 15567-2:2015-08 | SPORTS- AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS |
| EN 15567-2:2015 | Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements |
| EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| EN 12277:2015 | Mountaineering equipment - Harnesses - Safety requirements and test methods |
| EN 361:2002 | Personal protective equipment against falls from a height - Full body harnesses |
| EN 14229:2010 | Structural timber - Wood poles for overhead lines |
| EN 335:2013 | Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products |
| EN 351-1:2007 | Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
| EN 13411-5:2003+A1:2008 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| EN 353-2:2002 | Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line |
| EN 13411-2:2001+A1:2008 | Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings |
| EN 358:1999 | Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards |
| EN 354:2010 | Personal fall protection equipment - Lanyards |
| EN 360:2002 | Personal protective equipment against falls from a height - Retractable type fall arresters |
| EN 13411-3:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
| EN 341:2011 | Personal fall protection equipment - Descender devices for rescue |
| EN 355:2002 | Personal protective equipment against falls from a height - Energy absorbers |
| EN 350-2:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
| EN 13411-7:2006+A1:2008 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
| EN 1176-1:2017 | Playground equipment and surfacing - Part 1: General safety requirements and test methods |
| EN 13411-1:2002+A1:2008 | Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
| ISO/IEC 17020:2012 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
| ISO 4309:2010 | Cranes Wire ropes Care and maintenance, inspection and discard |
| ISO 22727:2007 | Graphical symbols — Creation and design of public information symbols — Requirements |
| EN 13411-4:2011 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
| EN 13411-6:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
| EN 363:2008 | Personal fall protection equipment - Personal fall protection systems |
| EN 813:2008 | Personal fall protection equipment - Sit harnesses |
| EN 15567-2:2015 | Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements |
| EN 362:2004 | Personal protective equipment against falls from a height - Connectors |
| EN 636:2012+A1:2015 | Plywood - Specifications |
| EN ISO 7010 : 2012 AMD 7 2017 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016) |
| EN ISO/IEC 17020:2012 | Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.