EN 15997:2011/AC:2012
Current
The latest, up-to-date edition.
ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
31-10-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Verification of the safety requirements
and/or protective measures
7 Information for use
Annex A (informative) - Examples of All Terrain
Vehicles (ATVs - Quads)
Annex B (normative) - Service brake performance
Annex C (normative) - Parking brake/Mechanism
performance
Annex D (normative) - Handlebar
Annex E (normative) - Rider foot environment
Annex F (normative) - Longitudinal stability
Annex G (normative) - Hot surfaces
Annex H (normative) - Noise test code
Annex I (informative) - Vibration test code
Annex J (informative) - Pre-delivery form
Annex K (informative) - Examples of warnings,
pictograms and combinations that may be used
Annex L (normative) - Evaluation sheet before letting
a person use the ATV
Annex M (informative) - Instructions for tyres to be
included in the instructions handbook
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
Bibliography
Pertains to "All Terrain Vehicles" or "ATVs" as defined in Clause 3 using liquid fuels (e.g. petrol, diesel).
Committee |
TC 354
|
DevelopmentNote |
Supersedes PREN 15997. (12/2011)
|
DocumentType |
Test Method
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
PN EN 15997 : 2012 AC 2014 | Identical |
NS EN 15997 : 2011 AC 2012 | Identical |
NF EN 15997 : 2012 | Identical |
I.S. EN 15997:2011 | Identical |
SN EN 15997 : 2012 | Identical |
NEN EN 15997 : 2011 C1 2012 | Identical |
NBN EN 15997 : 2012 COR 2012 | Identical |
DIN EN 15997:2012-10 | Identical |
UNE-EN 15997:2013 | Identical |
UNI EN 15997 : 2012 | Identical |
BS EN 15997:2011 | Identical |
16/30337122 DC : 0 | BS EN 16990 - NON-TYPE APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - ALL TERRAIN VEHICLES (ATVS - QUADS) AND SIDE BY SIDE VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS |
EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
ISO 20643:2005 | Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission |
ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
ISO 10326-1:2016 | Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements |
ISO 29802:2017 | All-terrain (AT) tyres and rims — Symbol marked pneumatic tyres on 5 degree tapered rims — Designation, dimension, marking and load ratings |
EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
CEN/TR 15172-1:2005 | Whole-body vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery |
SAE J 1623 : 2015 | OFF-HIGHWAY VEHICLE HEADLAMPS |
EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
EN ISO 11688-2 : 2000 | ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN |
EN 30326-1:1994/A2:2011 | MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:1992/AMD 2:2011) |
ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
CR 1030-1 : 1995 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY |
EN ISO 5349-2:2001/A1:2015 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349 2:2001/AMD 1:2015) |
EN ISO 20643:2008/A1:2012 | Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012) |
EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
EN ISO 8041:2005/AC:2008 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
EN ISO 12100-1:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
EN ISO 5349-1 : 2001 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001) |
EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
ISO 8041:2005 | Human response to vibration Measuring instrumentation |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
EN ISO 12100-2:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
EN 2941:2008 | Aerospace series - Nickel alloy rivets - Technical specification |
EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.