• There are no items in your cart

EN ISO 8041:2005/AC:2008

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION

Superseded date

18-06-2021

Published date

12-01-2013

1 Scope
2 Normative references
3 Terms, definitions and symbols
   3.1 Terms and definitions
   3.2 Symbols
4 Reference environmental conditions
5 Performance specifications
   5.1 General characteristics
   5.2 Display of signal magnitude
   5.3 Electrical output
   5.4 Vibration sensitivity
   5.5 Accuracy of indication at reference frequency
         under reference conditions
   5.6 Frequency weightings and frequency responses
   5.7 Amplitude linearity
   5.8 Instrument noise
   5.9 Signal-burst response
   5.10 Overload indication
   5.11 Under-range indication
   5.12 Time averaging
   5.13 Running r.m.s. acceleration
   5.14 Reset
   5.15 Timing facilities
   5.16 Electrical cross-talk
   5.17 Vibration transducer characteristics
   5.18 Power supply
6 Mounting
7 Environmental and electromagnetic criteria
   7.1 General
   7.2 Air temperature
   7.3 Surface temperature
   7.4 Electrostatic discharge
   7.5 Radio-frequency emissions and public-power-supply
         disturbances
   7.6 Immunity to a.c. power-frequency fields and
         radio-frequency fields
   7.7 Ingress of water and dust
8 Provision for use with auxiliary devices
9 Instrument marking
10 Instrument documentation
11 Testing and calibration
12 Pattern evaluation
   12.1 Introduction
   12.2 Testing requirements
   12.3 Submission for testing
   12.4 Marking of the vibration meter and information in
         the instrument documentation
   12.5 Mandatory facilities and general requirements
   12.6 Initial instrument preparation
   12.7 Indication at the reference frequency under
         reference conditions
   12.8 Electrical cross-talk
   12.9 Vibration transducer
   12.10 Amplitude linearity and under-range indication
   12.11 Frequency weightings and frequency responses
   12.12 Instrument noise
   12.13 Signal-burst response
   12.14 Overload indication
   12.15 Reset
   12.16 Combined axis outputs
   12.17 A.c. electrical output
   12.18 Timing facilities
   12.19 Power supply
   12.20 Environmental, electrostatic and radio-frequency
         tests
   12.21 Test report
13 Verification tests
   13.1 Introduction
   13.2 Testing requirements
   13.3 Submission for a test
   13.4 Marking of the vibration meter and information
         in the instrument documentation
   13.5 Mandatory facilities and general requirements
   13.6 Initial instrument preparation
   13.7 Indication at the reference frequency under reference
         conditions
   13.8 Electrical cross-talk
   13.9 Amplitude linearity and under-range indication
   13.10 Frequency weightings and frequency responses
   13.11 Instrument noise
   13.12 Signal-burst response
   13.13 Overload indication
   13.14 Reset
   13.15 Combined axis outputs
   13.16 Test report
14 In-situ checks
   14.1 Introduction
   14.2 Preliminary inspection
   14.3 Vibration sensitivity (field calibration)
Annex A (normative) - Specification for vibration field
        calibrator
Annex B (informative) - Frequency weightings
Annex C (informative) - Realization of frequency weighting
        filters
Annex D (informative) - Running r.m.s. time averaging
Annex E (informative) - Vibration transducer characteristics
Annex F (informative) - Tests for mounting systems
Annex G (normative) - Instrument documentation
Annex H (normative) - Phase-response requirements for
        measurement of non-r.m.s. quantities
Bibliography

Describes the performance specifications and tolerance limits for instruments designed to measure vibration values, for the purpose of assessing human response to vibration.

Committee
TC 231
DevelopmentNote
Supersedes ENV 28041 (06/2005)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

S.R. CEN/TR 1030-2:2016 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE
BS EN 60745-1 : 2009 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 15997:2011 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
PD CEN/TR 1030-2:2016 Hand-arm vibration. Guidelines for vibration hazards reduction Management measures at the workplace
BS EN 15997:2011 All terrain vehicles (ATVs - Quads). Safety requirements and test methods
I.S. EN 16230-1:2013 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
08/30182206 DC : DRAFT SEP 2008 BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY
08/30182212 DC : DRAFT SEP 2008 BS EN 13862 AMD1 - FLOOR CUTTING-OFF MACHINES - SAFETY
BS EN 16230-1 : 2013 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
I.S. EN 62841-1:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 15997:2013 All terrain vehicles (ATVs - Quads) - Safety requirements and test methods
DIN EN 14253 E : 2008 MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE
BS EN 1032 : 2003 MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
BS EN 12418 : 2000 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
CEN/TR 1030-2:2016 Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace
EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site - Safety
EN 15997:2011/AC:2012 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
EN 1032:2003+A1:2008 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
EN 13490:2001+A1:2008 Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration
CEI EN 62841-1 : 2016 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 12299:2009 Railway applications. Ride comfort for passengers. Measurement and evaluation
DIN EN 15997:2012-10 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 12418:2010-03 Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009)
DIN EN 13490:2009-03 MECHANICAL VIBRATION - INDUSTRIAL TRUCKS - LABORATORY EVALUATION AND SPECIFICATION OF OPERATOR SEAT VIBRATION
BS EN 13490 : 2002
I.S. EN 12418:2000 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
I.S. EN 13862:2002 FLOOR CUTTING-OFF MACHINES - SAFETY
I.S. EN 13861:2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
I.S. EN 14253:2003 MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE
I.S. EN 12348:2000 CORE DRILLING MACHINES ON STAND - SAFETY
I.S. EN 13490:2002
I.S. EN 1032:2003 MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
VDI 2057 Blatt 2:2016-03 Human exposure to mechanical vibrations - Hand-arm vibration
VDI 2057 Blatt 3:2017-03 Human exposure to mechanical vibration - Whole-body vibration at workplaces in buildings
VDI 2057-1 : 2017 COR 1 2017 HUMAN EXPOSURE TO MECHANICAL VIBRATIONS - WHOLE-BODY VIBRATION
VDI 4087:2016-12 Planning, construction and managing of scrap wood yards
BS EN 61029-1 : 2009 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
NF EN 61029-1 : 2009 AMD 11 2011 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
NF EN 12299 : 2009 RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION
I.S. EN 12299:2009 RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION
DIN EN 13862:2010-03 Floor cutting-off machines - Safety (includes Amendment A1:2009)
DIN EN 12348:2010-01 Core drilling machines on stand - Safety (includes Amendment A1:2009)
DIN EN 1032:2009-02 MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
DIN EN 13861:2012-01 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
EN 60745-1:2009/A11:2010 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 60745-1:2006 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
UNI EN 13862 : 2009 FLOOR CUTTING-OFF MACHINES - SAFETY
UNI EN 13861 : 2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
UNI EN 12418 : 2009 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
UNI EN 13490 : 2009 MECHANICAL VIBRATION - INDUSTRIAL TRUCKS - LABORATORY EVALUATION AND SPECIFICATION OF OPERATOR SEAT VIBRATION
EN 14253:2003+A1:2007 Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance
UNI EN 14253 : 2008 MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE
UNI EN 12348 : 2009 CORE DRILLING MACHINES ON STAND - SAFETY
UNI EN 1032 : 2009 MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
DIN EN 12299:2009-08 RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION
07/30171078 DC : DRAFT AUG 2007 BS EN 61029-1 - SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
UNI EN 12299 : 2009 RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION
16/30337122 DC : 0 BS EN 16990 - NON-TYPE APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - ALL TERRAIN VEHICLES (ATVS - QUADS) AND SIDE BY SIDE VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 60745-1:2009 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 14253 : 2003 MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE
BS EN 12348 : 2000 CORE DRILLING MACHINES ON A STAND - SAFETY
BS EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements
EN 13861:2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
EN 16230-1:2013+A1:2014 Leisure karts - Part 1: Safety requirements and test methods for karts
08/30182209 DC : DRAFT SEP 2008 BS EN 12418 AMD1 - MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
09/30206741 DC : 0 BS EN 15997 - ALL TERRAIN VEHICLES - REQUIREMENTS AND TEST METHODS
DIN EN 16230-1:2015-04 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
I.S. EN 61029-1:2009 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
BS EN 13861:2011 Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
EN 61029-1:2009/A11:2010 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
DIN EN 14253:2008-02 MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE
EN 62841-1:2015/AC:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 12348:2000+A1:2009 Core drilling machines on stand - Safety
EN 12299:2009 Railway applications - Ride comfort for passengers - Measurement and evaluation
EN 13862:2001+A1:2009 Floor cutting-off machines - Safety

IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
ISO/IEC Guide 98:1993 Guide to the expression of uncertainty in measurement (GUM)
ISO 10326-1:2016 Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements
CISPR 16-1-1:2015 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
ISO 2631-4:2001 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
CISPR 22:2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
ISO 2041:2009 Mechanical vibration, shock and condition monitoring Vocabulary
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
DIN 45662:1996-12 VIBRATION MEASURING INSTRUMENTATION - FUNDAMENTAL REQUIREMENTS AND VERIFICATION
ISO 1683:2015 Acoustics Preferred reference values for acoustical and vibratory levels
ISO 2631-2:2003 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz)
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
ISO 5348:1998 Mechanical vibration and shock Mechanical mounting of accelerometers
ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
IEC 61260:1995 Electroacoustics - Octave-band and fractional-octave-band filters
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.