EN 61672-2:2013/A1:2017
Current
Current
The latest, up-to-date edition.
ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017)
Amendment of
Published date
07-07-2017
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Submission for testing
5 Marking of the sound level meter and
information in the Instruction Manual
6 Mandatory facilities and general requirements
7 Environmental, electrostatic, and radio-frequency
tests
8 Radio-frequency emissions and public power
supply disturbances
9 Electroacoustical performance tests
10 Pattern evaluation report
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Gives details of the tests necessary to verify conformance to all mandatory specifications given in IEC 61672-1 for time-weighting sound level meters, integrating-averaging sound level meters, and integrating sound level meters.
| Committee |
SR 29
|
| DevelopmentNote |
Together with EN 61672-1, it supersedes EN 60651 & EN 60804 (07/2003)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IEC 61672-2:2013/AMD1:2017 | Identical |
| IEC 61672-2:2013+AMD1:2017 CSV | Identical |
| NF EN 61672-2 : 2014 AMD 1 2017 | Identical |
| NBN EN 61672-2 : 2014 | Identical |
| UNE-EN 61672-2:2005 | Identical |
| NEN EN IEC 61672-2 : 2014 AMD 1 2017 | Identical |
| I.S. EN 61672-2:2013 | Identical |
| PN-EN 61672-2:2014-03/A1:2017-10 | Identical |
| SN EN 61672-2 : 2003 | Identical |
| UNE-EN 61672-2:2014/A1:2017 | Identical |
| OVE EN 61672-2 : 2020 03 01 | Identical |
| BS EN 61672-2 : 2013 | Identical |
| CEI EN 61672-2 : 2014 | Identical |
| DIN EN 61672-2:2018-01 | Identical |
| PNE-EN 61672-2:2013/prA1:2016 | Identical |
| BS EN 61672-2:2013+A1:2017 | Identical |
| NF EN 15892 : 2011 | RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER'S CABS |
| UNE-EN 16286-2:2014 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
| I.S. EN 14035-22:2004 | FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS |
| PREN 12733 : DRAFT 2016 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| BS EN 16232 : 2013 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| I.S. EN 14035-36:2004 | FIREWORKS - PART 36: WHEELS - SPECIFICATION AND TEST METHODS |
| 11/30252448 DC : 0 | BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| BS EN 62282-3-200:2016 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| 08/30182278 DC : 0 | BS EN 1547:2001/A1 - INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT |
| PREN 14180 : DRAFT 2012 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| BS EN 61672-3:2013 | Electroacoustics. Sound level meters Periodic tests |
| 09/30187535 DC : 0 | BS EN 13000 - CRANES - MOBILE CRANES |
| EEMUA 140 : 2014 | NOISE PROCEDURE SPECIFICATION |
| I.S. EN 14035-20:2005 | FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
| I.S. EN 62282-3-2:2006 | FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| I.S. EN 62282-3-200:2016 | FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| I.S. EN 14035-3:2004 | FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS |
| I.S. EN 14035-5:2006 | FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS |
| UNI EN 16232 : 2013 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| I.S. EN 15153-2:2013 | RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 2: WARNING HORNS |
| BS EN 15153-2:2013 | Railway applications. External visible and audible warning devices for trains Warning horns |
| BS EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing General requirements |
| BS EN 13141-2:2010 | Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust and supply air terminal devices |
| BS EN 13000 : 2010 | CRANES - MOBILE CRANES |
| DIN EN 14035-38:2006-05 | FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS |
| EN 62585 : 2012 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012) |
| EN 13141-2:2010 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| EN 61672-3:2013 | Electroacoustics - Sound level meters - Part 3: Periodic tests |
| EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| EN 62282-3-200:2016 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| EN 13544-1:2007+A1:2009 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| PREN 1422 : DRAFT 2011 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14035-10:2004-11 | FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS |
| BS EN 62389:2006 | Methods of measurement for DVD players |
| I.S. EN 16232:2013 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| 12/30262894 DC : 0 | BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| PD EN 14035-3:2004 | Fireworks Aerial wheels. Specification and test methods |
| I.S. EN 13000:2010 | Cranes - Mobile cranes |
| BS EN 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| I.S. EN 15892:2011 | RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER'S CABS |
| I.S. EN 61672-3:2013 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 3: PERIODIC TESTS |
| EN 15153-2:2013 | Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| DIN EN 12941:2009-02 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| DIN EN 13000:2014-11 | Cranes - Mobile Cranes; German version EN 13000:2010+A1:2014 |
| DIN EN 1547:2010-02 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment (includes Amendment A1:2009) |
| DIN EN 14035-28:2004-11 | FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-22:2004-11 | FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS |
| DIN EN 13141-2:2010-12 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| DIN EN 14035-9:2004-11 | FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-5:2006-05 | FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-36:2004-11 | FIREWORKS - PART 36: WHEELS - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-3:2004-11 | FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS |
| I.S. EN 1547:2001 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
| I.S. EN 13141-2:2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| UNI EN 1547 : 2009 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT |
| VDI 3766:2012-09 | Ultrasound - Workplace - Measurement, assessment, judgement and reduction |
| VDI 2715:2011-11 | Noise control in heating systems |
| VDI 2038 Blatt 3:2013-11 | Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Secondary airborne sound - prognosis, measurement, evaluation and reduction measures |
| 10/30214903 DC : 0 | BS EN ISO 3095 - RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES |
| I.S. EN 14035-28:2004 | FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS |
| BS EN 60076-10:2016 | Power transformers Determination of sound levels |
| PD EN 14035-17:2004 | Fireworks Ground spinners. Specification and test methods |
| DIN EN 16286-2:2013-09 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
| EN 16232:2013 | Child use and care articles - Infant swings |
| PD EN 14035-4:2003 | Fireworks Bangers and banger batteries. Specification and test methods |
| I.S. EN 13487:2004 | HEAT EXCHANGERS - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT |
| I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| CEI EN 60076-10 : 2002 | POWER TRANSFORMERS - PART 10: DETERMINATION OF SOUND LEVELS |
| UNI EN 16286-2 : 2013 | RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS |
| I.S. EN 60076-10:2016 | POWER TRANSFORMERS - PART 10: DETERMINATION OF SOUND LEVELS |
| DIN EN 13544-1:2009-12 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| BS EN 14035-22:2004 | Fireworks Mines. Specification and test methods |
| BS EN 14035-36:2004 | Fireworks Wheels. Specification and test methods |
| UNE-EN 13141-2:2011 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| BS EN ISO 16032:2004 | Acoustics. Measurement of sound pressure level from service equipment in buildings. Engineering method |
| CEI EN 60519-1 : 2016 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 61010-1:2011 | Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements |
| EN 13487 : 2003 | HEAT EXCHANGERS - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT |
| UNE-EN 15153-2:2014 | Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns |
| I.S. EN 13544-1:2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| EN 14035-20:2005 | Fireworks - Part 20: Jumping crackers - Specification and test methods |
| UNI EN 13141-2 : 2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| UNI EN 13544-1 : 2009 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| UNI EN 13000 : 2014 | CRANES - MOBILE CRANES |
| UNI EN 15892 : 2011 | RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER'S CABS |
| PREN 13487 : DRAFT 2017 | HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT |
| 17/30326391 DC : 0 | BS EN 15153-2 - RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES - PART 2: WARNING HORNS FOR MAINLINE RAIL |
| I.S. EN 14035-38:2006 | FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS |
| 10/30205116 DC : 0 | BS EN 15153-2 - RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 2: WARNING HORNS |
| PD EN 14035-20:2005 | Fireworks Jumping crackers. Specification and test methods |
| PD EN 14035-9:2004 | Fireworks Crackling granules. Specification and test methods |
| PD EN 14035-12:2003 | Fireworks Flash bangers and flash banger batteries. Specification and test methods |
| PD EN 14035-10:2004 | Fireworks Double bangers. Specification and test methods |
| I.S. EN 61010-2-040:2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS |
| BS EN 62282-3-2:2006 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| I.S. EN 14035-9:2004 | FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS |
| CEI EN 61672-3 : 2014 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 3: PERIODIC TESTS |
| 16/30342849 DC : 0 | BS EN 12733 - AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| DIN EN 16232:2013-12 | CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| 17/30361327 DC : 0 | BS EN 13487 - HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT |
| I.S. EN 61010-1:2010 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 14035-17:2004 | FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
| I.S. EN 14035-10:2004 | FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| ISO 16032:2004 | Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method |
| BS EN 1547 : 2001 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT |
| BS EN 13544-1 : 2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| BS EN 14035-38:2006 | Fireworks Shot tubes. Specification and test methods |
| BS EN 13487:2003 | Heat exchangers. Forced convection air cooled refrigerant condensers and dry coolers. Sound measurement |
| UNE-EN 13000:2010 | Cranes - Mobile cranes |
| BS EN 14035-5:2006 | Fireworks Batteries and combinations. Specification and test methods |
| EN 14035-3:2004 | Fireworks - Part 3: Aerial wheels - Specification and test methods |
| EN 14035-22:2004 | Fireworks - - Part 22: Mines - Specification and test methods |
| EN 1547:2001+A1:2009 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
| EN 14035-17:2004 | Fireworks - Part 17: Ground spinners - Specification and test methods |
| EN 14035-10:2004 | Fireworks - Part 10: Double Bangers - Specification and test methods |
| EN 15892:2011 | Railway applications - Noise Emission - Measurement of noise inside driver's cabs |
| EN ISO 16032:2004 | Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004) |
| EN 16286-2:2013 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
| EN 14035-28 : 2004 COR 2006 | FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS |
| EN 14035-36:2004 | Fireworks - Part 36: Wheels - Specification and test methods |
| EN 14035-9:2004 | Fireworks - Part 9: Crackling granules - Specification and test methods |
| EN 14035-38:2006 | Fireworks - Part 38: Shot tubes - Specification and test methods |
| EN 14035-5:2006 | Fireworks - Part 5: Batteries and combinations - Specification and test methods |
| UNE-EN 15892:2012 | Railway applications - Noise Emission - Measurement of noise inside driver's cabs |
| BS EN 62585:2012 | Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter |
| BS EN 16286-2:2013 | Railway applications. Gangway systems between vehicles Acoustic measurements |
| CEI EN 62585 : 2013 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER |
| 11/30241418 DC : 0 | BS EN 16286-2 - RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS |
| DIN EN 14035-20:2005-06 | FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
| BS EN 15892:2011 | Railway applications. Noise emission. Measurement of noise inside driver\'s cabs |
| UNE-EN 62585:2013 | Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter |
| DIN EN 14035-17:2004-11 | FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
| UNE-EN 60076-10:2017 | Power transformers - Part 10: Determination of sound levels |
| I.S. EN 16286-2:2013 | RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS |
| I.S. EN 61010-1:2010/A1:2019 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| EN 13000:2010+A1:2014 | Cranes - Mobile cranes |
| I.S. EN 60519-1:2015 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| UNI EN 15153-2 : 2013 | RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 2: WARNING HORNS |
| DIN EN 15153-2:2013-04 | RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 2: WARNING HORNS |
| DIN EN 13487:2004-03 | HEAT EXCHANGERS - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT |
| BS EN 14035-28:2004 | Fireworks Roman candles. Specification and test methods |
| EN 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
| EN 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
| EN 62389 : 2006 | METHODS OF MEASUREMENT FOR DVD PLAYERS |
| DIN EN 15892:2011-05 | Railway applications - Noise Emission - Measurement of noise inside driver\'s cabs |
| DIN EN ISO 16032:2004-12 | Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004) |
| I.S. EN ISO 16032:2004 | ACOUSTICS - MEASUREMENT OF SOUND PRESSURE LEVEL FROM SERVICE EQUIPMENT IN BUILDINGS - ENGINEERING METHOD |
| UNE-EN 13544-1:2007 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| EN 61183:1994 | Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters |
| IEC 61094-5:2016 | Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison |
| EN 61094-5:2016 | Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison |
| IEC 61183:1994 | Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters |
| EN 55016-2-3:2017 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| ISO 26101:2017 | Acoustics Test methods for the qualification of free-field environments |
| EN 61094-1:2000 | Measurement microphones - Part 1: Specifications for laboratory standard microphones |
| IEC 61094-1:2000 | Measurement microphones - Part 1: Specifications for laboratory standard microphones |
| CISPR 16-2-1:2014 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements |
| EN 62585 : 2012 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012) |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| EN 55022:2010/AC:2011 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| IEC 61094-8:2012 | Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison |
| IEC 61000-4-20:2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| CISPR 16-2-3:2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| EN 60942:2003 | Electroacoustics - Sound calibrators |
| IEC 62585:2012 | Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter |
| EN 61000-4-20:2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES |
| EN 55016-2-1:2014/A1:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-1: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - CONDUCTED DISTURBANCE MEASUREMENTS (CISPR 16-2-1:2014/A1:2017) |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| EN 55016-1-1:2010/A2:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.