EN 617:2001+A1:2010
Current
Current
The latest, up-to-date edition.
Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
Published date
08-12-2010
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety and EMC requirements and/or measures
6 Verification of safety and EMC requirements and/or
measures
7 Information for use
Annex A (normative) - List of hazards
Annex B (informative) - Further Documents and Remarks
Annex C (informative) - Safety signs mentioned in 7.2.3
Annex D (informative) - Fire or explosion hazard
Annex ZA (informative) - Coverage of Essential Requirements
of EU Directives
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of the EU
Directive 2006/42/EC
Bibliography
This European Standard deals with the technical requirements to minimise the hazards listed in clause 4 and annex A. These hazards can arise during the operation and maintenance of equipment to store bulk materials in silos, bunkers, bins and hoppers and their built-in inlet and outlet devices when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This standard deals with safety related technical verification during commissioning.The following parts are dealt with in this standard (see Figure 1):NOTESilos are made of different materials e.g. concrete, steel, aluminium, spun rayon, wood.Safety requirements and/or measures in this standard apply to equipment used in all environments. However, additional risk assessment and safety measures need to be considered in severe conditions, e.g. low or high temperatures out of the range covered by EN 60204-1, corrosive environments, strong magnetic fields, radioactive conditions and bulk materials to be stored included their flow the nature of which could lead to a dangerous situation.This standard does not cover requirements for:-movable, non permanent storage equipment such as road vehicles, rail wagons, containers for bulk materials, ships and barges;-blow tanks and pressure vessels as used in pneumatic conveying systems;-stockpiles and flat storage;-storage equipment for non bulk materials (liquid, gas, slurries, sludge, silage);-dismantling and transport of storage equipments;-procedure for entering the silo and behaviour of persons inside the silo;-storage equipments for underground mining;-"noise."This European Standard deals with the technical requirements for electromagnetic compatibility (EMC).
| Committee |
CEN/TC 148
|
| DevelopmentNote |
2001 Edition Re-issued in December 2010 & incorporates AMD 1 2010. (12/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 617:2002 | Identical |
| NBN EN 617 : 2001 + A1 2011 | Identical |
| NEN EN 617 : 2001 + A1 2010 | Identical |
| BS EN 617 : 2001 | Identical |
| SN EN 617 : 2001 + A1 2011 | Identical |
| I.S. EN 617:2001 | Identical |
| NF EN 617 : 2001 + A1 2011 | Identical |
| NS EN 617 : 2001 + A1 2010 | Identical |
| DIN EN 617:2011-06 | Identical |
| PN EN 617 : 2004 + A1 2011 | Identical |
| UNI EN 617 : 2011 | Identical |
| UNE-EN 617:2002+A1:2011 | Identical |
| BS EN 617:2001+A1:2010 | Identical |
| 17/30364328 DC : 0 | BS EN 1009-5 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 5: SPECIFIC REQUIREMENTS FOR CLEANING, RECYCLING, SORTING AND MUD TREATMENT MACHINERY |
| BS EN 12111:2014 | Tunnelling machines. Road headers and continuous miners. Safety requirements |
| BS EN 618 : 2002 | |
| BS EN 620 : 2002 | |
| EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar - Safety requirements |
| EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| I.S. EN 12151:2007 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| 05/19981971 DC : 0 | BS EN 1034-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
| I.S. EN 1034-4:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
| I.S. EN 12111:2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| I.S. EN 12779:2015 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
| DIN EN 1034-4:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities (includes Amendment A1:2009) |
| I.S. EN 618:2002 | |
| I.S. EN 620:2002 | |
| PREN 12779 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| I.S. EN 45510-4-5:2002 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-5: BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT |
| DIN EN 12779:2016-03 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| DIN EN 620:2011-07 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials (includes Amendment A1:2010) |
| BS EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar. Safety requirements |
| EN 618:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
| UNI EN 1034-4 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
| UNI EN 618 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF BULK MATERIALS EXCEPT FIXED BELT CONVEYORS |
| UNI EN 12111 : 2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| PREN 1009-5 : DRAFT 2017 | MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 5: SPECIFIC REQUIREMENTS FOR CLEANING, RECYCLING, SORTING AND MUD TREATMENT MACHINERY |
| CEI UNI EN 45510-4-5 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-5: BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT |
| 10/30233949 DC : 0 | BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS |
| 17/30364338 DC : 0 | BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS |
| EN 620:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| DIN EN 618:2011-06 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
| BS EN 1034-4 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
| BS EN 12779:2015 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements |
| UNE-EN 620:2002 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| UNE-EN 618:2002 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors. |
| EN 45510-4-5:2002 | Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries - Coal handling and bulk storage plant |
| BS EN 45510-4-5:2002 | Guide for the procurement of power station equipment. Boiler auxiliaries Coal handling and bulk storage plant |
| 14/30292850 DC : 0 | BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| UNE-EN 12779:2016 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| UNI EN 620 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR FIXED BELT CONVEYORS FOR BULK MATERIALS |
| DIN EN 45510-4-5:2002-11 | Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries; Coal handling and bulk storage plant |
| EN 1034-4:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities |
| DIN EN 12151:2008-05 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| EN 12111:2014 | Tunnelling machines - Road headers and continuous miners - Safety requirements |
| UNE-EN 1034-4:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN 618:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| EN 620:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| ISO 3435:1977 | Continuous mechanical handling equipment — Classification and symbolization of bulk materials |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| NFP 22 630 : 1992 XP | STEEL CONSTRUCTION - STEEL SILOS - DESIGN LOADS IN SILOS |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| ENV 1991-4 : DRAFT 95 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS IN SILOS AND TANKS |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ENV 1991-1 : DRAFT 1994 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - BASIS OF DESIGN |
| EN 811 : 1996 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| 2004/108/EC : 2004 | DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC |
| EN 574:1996+A1:2008 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| ISO 6184-1:1985 | Explosion protection systems Part 1: Determination of explosion indices of combustible dusts in air |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing |
| EN 547-3:1996+A1:2008 | Safety of machinery - Human body measurements - Part 3: Anthropometric data |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| EN 12464-2:2014 | Light and lighting - Lighting of work places - Part 2: Outdoor work places |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| IEC 61241-1-2:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-2: Electrical apparatus protected by enclosures and surface temperature limitation - Selection, installation and maintenance |
| IEC 60364-7-706:2005 | Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 626-1:1994+A1:2008 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
| EN 26184-1 : 1991 | EXPLOSION PROTECTION SYSTEMS - DETERMINATION OF EXPLOSION INDICES OF COMBUSTIBLE DUSTS IN AIR |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| EN 795:2012 | Personal fall protection equipment - Anchor devices |
| ISO 3864:1984 | Safety colours and safety signs |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| EN 741:2000+A1:2010 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.