EN 736-2:2016
Current
Current
The latest, up-to-date edition.
Valves - Terminology - Part 2: Definition of components of valves
Published date
03-02-2016
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
Annex A (informative) - Glossary
Bibliography
This European Standard specifies the names of components of valves and their definitions. It has the purpose to provide a uniform terminology for all components of valves.This European Standard covers components common to more than one type of valve. Names of components and definitions specific to one type of valve will be found in the relevant product or performance standard.
| Committee |
CEN/TC 69
|
| DevelopmentNote |
Supersedes PREN 736-2. (03/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 736-2:2016 | Identical |
| NBN EN 736-2 : 2016 | Identical |
| NF EN 736-2 : 1997 | Identical |
| SN EN 736-2:2016 | Identical |
| UNI EN 736-2 : 2002 | Identical |
| NEN EN 736-2 : 2016 | Identical |
| PN EN 736-2 : 2016 | Identical |
| I.S. EN 736-2:2016 | Identical |
| BS EN 736-2:2016 | Identical |
| UNE-EN 736-2:2016 | Identical |
| NS EN 736-2 : 1997 | Identical |
| DIN EN 736-2:2016-06 | Identical |
| DIN EN 15714-3:2010-02 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| 16/30340536 DC : 0 | BS EN 12627 - INDUSTRIAL VALVES - BUTT WELDING ENDS FOR STEEL VALVES |
| I.S. EN 12334:2001 | INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
| I.S. EN 15714-3:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| PREN 1171 : DRAFT 2014 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| 01/709787 DC : DRAFT JUN 2001 | PREN ISO 16138 - INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTIC MATERIALS |
| 05/30134037 DC : 0 | EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| I.S. EN 16722:2015 | INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH THREADED ENDS |
| PREN 14141 : DRAFT 2011 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| BS EN 16767:2016 | Industrial valves. Steel and cast iron check valves |
| DIN CEN/TS 13547:2007-02 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| UNE-EN 16767:2017 | Industrial valves - Steel and cast iron check valves |
| 01/709788 DC : DRAFT JUN 2001 | PREN ISO 21787 - INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTIC MATERIALS |
| 14/30301577 DC : 0 | BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| 01/709786 DC : DRAFT JUN 2001 | PREN ISO 16137 - INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTIC MATERIALS |
| UNE-EN 13547:2014 | Industrial valves - Copper alloy ball valves |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| PREN 19 : DRAFT 2014 | INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
| I.S. EN 13547:2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| UNI EN 1555-4 : 2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
| I.S. EN ISO 16136:2006 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 21787:2006 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16138:2006 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16139:2006 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| I.S. EN ISO 16135:2006 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| ONORM EN ISO 16139 : 2008 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16137:2006 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| EN 12982:2009 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| DIN EN 13709:2010-10 | Industrial valves - Steel globe and globe stop and check valves |
| DIN EN 12982:2009-11 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| BS EN 14141:2013 | Valves for natural gas transportation in pipelines. Performance requirements and tests |
| BS EN 12201-4:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Valves |
| UNE-EN 1983:2014 | Industrial valves - Steel ball valves |
| UNE-EN 16722:2016 | Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
| BS EN 12288:2010 | Industrial valves. Copper alloy gate valves |
| BS EN ISO 16135:2006 | Industrial valves. Ball valves of thermoplastic materials |
| BS EN 1555-4:2011 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Valves |
| BS EN 1984:2010 | Industrial valves. Steel gate valves |
| BS EN ISO 16139:2006 | Industrial valves. Gate valves of thermoplastic materials |
| I.S. EN 12288:2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| I.S. EN 12982:2009 | INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES |
| EN 12288:2010 | Industrial valves - Copper alloy gate valves |
| EN 12201-4:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
| EN 13547:2013 | Industrial valves - Copper alloy ball valves |
| EN 12570:2000 | Industrial valves - Method for sizing the operating element |
| EN 1349:2009 | Industrial process control valves |
| CEN/TS 13547:2006 | Industrial valves - Copper alloy ball valves |
| BS EN 1349:2009 | Industrial process control valves |
| BS EN 15714-1:2009 | Industrial valves. Actuators Terminology and definitions |
| PREN 13774 : DRAFT 2011 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| 16/30344095 DC : 0 | BS EN 736-1 - VALVES - TERMINOLOGY - PART 1: DEFINITION OF TYPES OF VALVES |
| 14/30296044 DC : 0 | BS EN 16722 - INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH SCREWED ENDS |
| 98/717199 DC : DRAFT NOV 1998 | PREN 13397: INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS |
| PREN 13789 : DRAFT 2009 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| PREN 13709 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| PREN 1984 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| BS EN 15714-3:2009 | Industrial valves. Actuators Pneumatic part-turn actuators for industrial valves. Basic requirements |
| I.S. EN 593:2017 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| 11/30249105 DC : 0 | BS EN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| 11/30249111 DC : 0 | BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 99/707487 DC : DRAFT JUN 1999 | PREN 13547 - INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 01/122757 DC : DRAFT JULY 2001 | ISO/DIS 16138 - INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTIC MATERIALS |
| DD CEN/TS 13547:2006 | Industrial valves. Copper alloy ball valves |
| I.S. EN 15714-1:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 1: TERMINOLOGY AND DEFINITIONS |
| ISO 9635-1:2014 | Agricultural irrigation equipment Irrigation valves Part 1: General requirements |
| ISO 16486-4:2016 | Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 4: Valves |
| DIN EN 12516-4:2015-01 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| EN 12516-4:2014 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| NF EN 1555-4 : 2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
| ONORM EN ISO 16136 : 2008 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| ONORM EN ISO 16137 : 2008 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 12288:2010-10 | Industrial valves - Copper alloy gate valves |
| DIN EN 1626:2009-01 | CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
| DIN EN 1171:2015-11 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| DIN EN 12760:2016-07 | INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
| DIN EN 1984:2010-10 | Industrial valves - Steel gate valves |
| DIN EN 14384:2005-10 | Pillar fire hydrants; German version EN 14384:2005 |
| DIN EN 14339:2005-10 | Underground fire hydrants; German version EN 14339:2005 |
| BS EN 12266-1:2012 | Industrial valves. Testing of metallic valves Pressure tests, test procedures and acceptance criteria. Mandatory requirements |
| ISO 16136:2006 | Industrial valves Butterfly valves of thermoplastics materials |
| BS EN 12334:2001 | Industrial valves. Cast iron check valves |
| BS EN 12516-3:2002 | Valves. Shell design strength Experimental method |
| UNE-EN 14141:2014 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| UNE-EN 593:2009 | Industrial valves - Metallic butterfly valves |
| BS EN 13709:2002 | Industrial valves. Steel globe and globe stop and check valves |
| I.S. EN 1626:2008 | CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
| I.S. EN 12201-4:2012 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 4: VALVES FOR WATER SUPPLY SYSTEMS |
| I.S. EN 1171:2015 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| I.S. EN 13774:2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| DIN EN 12334:2004-10 | INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
| DIN EN 12334:2001-04 | INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
| I.S. EN 12266-2:2012 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS |
| I.S. EN 1984:2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| I.S. EN 1555-4:2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
| I.S. EN 19:2016 | INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
| I.S. EN 14141:2013 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| I.S. EN 1983:2013 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| I.S. EN 12760:2016 | INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
| DIN EN 12516-3:2003-01 | VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD |
| I.S. EN 1349:2009 | INDUSTRIAL PROCESS CONTROL VALVES |
| I.S. EN 13789:2010 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| I.S. EN 13709:2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| I.S. EN 12266-1:2012 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS |
| UNI EN 1349 : 2010 | INDUSTRIAL PROCESS CONTROL VALVES |
| 04/30118763 DC : DRAFT AUG 2004 | PREN 12335 - INDUSTRIAL VALVES - CAST IRON PLUG VALVES |
| PREN 13547 : DRAFT 1999 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 09/30205877 DC : 0 | BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES |
| 05/30138208 DC : DRAFT AUG 2005 | ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 12567:2000 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS |
| PREN 12516-4 : DRAFT 2011 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 00/714962 DC : DRAFT OCT 2000 | PREN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOF STEEL VALVE SHELLS |
| 13/30278124 DC : 0 | BS ISO 4437-4 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
| 04/30124417 DC : DRAFT OCT 2004 | EN 15081 - INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT |
| 09/30205883 DC : 0 | BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| 09/30205880 DC : DRAFT OCT 2009 | BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| 16/30345749 DC : 0 | BS EN 12516-1:2014/A1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| 01/122755 DC : DRAFT JULY 2001 | ISO/DIS 21787 - INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTIC MATERIALS |
| 01/709785 DC : DRAFT JUN 2001 | PREN ISO 16136 - INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTIC MATERIALS |
| UNI EN 15714-3 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| UNI EN 12516-1 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| ISO 4437-4:2015 | Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves |
| I.S. EN 16767:2016 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| I.S. EN 12516-1:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| UNI EN 13547 : 2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| I.S. CEN TS 13547:2006 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| I.S. EN 12627:2017 | INDUSTRIAL VALVES - BUTT WELDING ENDS FOR STEEL VALVES |
| EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| EN 12760:2016 | Industrial valves - Socket welding ends for steel valves |
| EN 19:2016 | Industrial valves - Marking of metallic valves |
| EN 12627:2017 | Industrial valves - Butt welding ends for steel valves |
| ONORM EN ISO 16138 : 2008 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 1555-4:2011-07 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
| DIN EN 14141:2013-08 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| DIN EN ISO 16135:2006-06 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| BS EN 1074-1:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests General requirements |
| BS EN ISO 16138:2006 | Industrial valves. Diaphragm valves of thermoplastics materials |
| BS EN 12567:2000 | Industrial valves. Isolating valves for LNG. Specification for suitability and appropriate verification tests |
| BS EN 1626:2008 | Cryogenic vessels. Valves for cryogenic service |
| BS EN 12570:2000 | Industrial valves. Method for sizing the operating element |
| ISO 16135:2006 | Industrial valves Ball valves of thermoplastics materials |
| UNI EN 12982 : 2009 | INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES |
| UNI EN 12570 : 2001 | INDUSTRIAL VALVES - METHOD FOR SIZING THE OPERATING ELEMENT |
| UNI EN 12288 : 2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| UNI EN 1983 : 2013 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| UNI EN 13774 : 2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| EN ISO 21787:2006 | Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) |
| UNI EN 13789 : 2010 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| UNI EN 14141 : 2013 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| UNI EN 1626 : 2009 | CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
| UNI EN 14384 : 2006 | PILLAR FIRE HYDRANTS |
| UNI EN 12201-4 : 2012 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 4: VALVES FOR WATER SUPPLY SYSTEMS |
| UNI EN 1984 : 2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| UNI EN 12266-1 : 2012 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS |
| BS EN 1171:2015 | Industrial valves. Cast iron gate valves |
| UNI EN 13709 : 2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| UNI EN 12266-2 : 2012 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS |
| DIN EN 13547:2013-12 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 14/30301146 DC : 0 | BS EN 19 - INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
| PREN 736-1 : DRAFT 2016 | VALVES - TERMINOLOGY - PART 1: DEFINITION OF TYPES OF VALVES |
| 07/30166912 DC : DRAFT AUG 2007 | BS EN 15714-3 - INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 14/30282872 DC : 0 | BS EN 1171 - INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| PREN 12627 : DRAFT 2016 | INDUSTRIAL VALVES - BUTT WELDING ENDS FOR STEEL VALVES |
| 05/30141776 DC : 0 | EN 15389 - INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS |
| 11/30248438 DC : 0 | BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| 16/30339483 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| BS EN 13547:2013 | Industrial valves. Copper alloy ball valves |
| BS ISO 4437-4:2015 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Valves |
| 05/30132532 DC : DRAFT APR 2005 | EN 12982 - INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES |
| PREN 593 : DRAFT 2016 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| 09/30202714 DC : 0 | BS EN 12266-1 - INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS |
| 09/30202717 DC : 0 | BS EN 12266-2 - INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS |
| BS EN 16722:2015 | Industrial valves. End-to-end and centre-to-end dimensions for valves with threaded ends |
| BS EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 08/30179182 DC : DRAFT MAY 2008 | BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
| UNI EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| UNE-EN 12516-4:2016 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| PREN 12288 : DRAFT 2009 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| BS EN 12516-1 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| EN 12516-1:2014 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| BS EN 12627:2017 | Industrial valves. Butt welding ends for steel valves |
| EN 736-1:2018 | Valves - Terminology - Part 1: Definition of types of valves |
| ONORM EN ISO 16135 : 2008 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| UNE-EN 12627:1999 | Industrial valves - Butt welding ends for steel valves |
| DIN EN ISO 16138:2006-06 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 13789:2010-09 | Industrial valves - Cast iron globe valves |
| DIN EN ISO 16136:2006-06 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16137:2006-06 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16139:2006-06 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 13774:2013-05 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| BS EN 13789:2002 | Industrial valves. Cast iron globe valves |
| BS EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements |
| BS EN 12982:2009 | Industrial valves. End-to-end and centre-to-end dimensions for butt welding end valves |
| ISO 21787:2006 | Industrial valves Globe valves of thermoplastics materials |
| BS EN 14341:2006 | Industrial valves. Steel check valves |
| UNE-EN 12201-4:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
| EN 16767:2016 | Industrial valves - Steel and cast iron check valves |
| BS EN ISO 16137:2006 | Industrial valves. Check valves of thermoplastic materials |
| BS EN ISO 21787:2006 | Industrial valves. Globe valves of thermoplastics materials |
| BS EN 13397:2002 | Industrial valves. Diaphragm valves made of metallic materials |
| UNE-EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| UNE-EN 1555-4:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
| ISO 16137:2006 | Industrial valves Check valves of thermoplastics materials |
| BS EN ISO 16136:2006 | Industrial valves. Butterfly valves of thermoplastic materials |
| UNE-EN 12760:2017 | Industrial valves - Socket welding ends for steel valves |
| UNE-EN 12266-2:2013 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| ISO 16139:2006 | Industrial valves Gate valves of thermoplastics materials |
| BS EN 1983:2013 | Industrial valves. Steel ball valves |
| UNE-EN 12982:2010 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| UNE-EN 19:2016 | Industrial valves - Marking of metallic valves |
| BS EN 12266-2:2012 | Industrial valves. Testing of metallic valves Tests, test procedures and acceptance criteria. Supplementary requirements |
| BS EN 19:2016 | Industrial valves. Marking of metallic valves |
| DIN EN ISO 21787:2006-06 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| EN ISO 16139:2006 | Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) |
| EN 15081:2007 | Industrial valves - Mounting kits for part-turn valve actuator attachment |
| EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| EN ISO 16135:2006 | Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) |
| EN 1626:2008 | Cryogenic vessels - Valves for cryogenic service |
| EN 13709:2010 | Industrial valves - Steel globe and globe stop and check valves |
| EN ISO 16136:2006 | Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) |
| EN 15714-3:2009 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| EN 1983:2013 | Industrial valves - Steel ball valves |
| EN 14384:2005 | Pillar fire hydrants |
| EN 14339:2005 | Underground fire hydrants |
| EN 14141:2013 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| EN 1984:2010 | Industrial valves - Steel gate valves |
| EN 13789:2010 | Industrial valves - Cast iron globe valves |
| EN ISO 16138:2006 | Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) |
| EN 15714-1:2009 | Industrial valves - Actuators - Part 1: Terminology and definitions |
| EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
| EN 16722:2015 | Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
| EN ISO 16137:2006 | Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) |
| EN 14341:2006 | Industrial valves - Steel check valves |
| 09/30205886 DC : 0 | BS EN 13789 - INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| 01/122758 DC : DRAFT JULY 2001 | ISO/DIS 16135 - INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTIC MATERIALS |
| I.S. EN 14341:2006 | INDUSTRIAL VALVES - STEEL CHECK VALVES |
| UNE-EN 15714-3:2010 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| UNE-EN 15714-1:2010 | Industrial valves - Actuators - Part 1: Terminology and definitions |
| 08/30187521 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
| 13/30271601 DC : 0 | BS ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
| 01/709784 DC : DRAFT JUN 2001 | PREN ISO 16135 - INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTIC MATERIALS |
| 11/30243885 DC : 0 | BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| BS EN 593:2017 | Industrial valves. Metallic butterfly valves for general purposes |
| 09/30202313 DC : 0 | BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
| 01/122754 DC : DRAFT JULY 2001 | ISO/DIS 16137 - INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTIC MATERIALS |
| I.S. EN 12516-4:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| DIN EN 16767:2016-08 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| BS ISO 9635-1:2014 | Agricultural irrigation equipment. Irrigation valves General requirements |
| 04/30118758 DC : DRAFT AUG 2004 | PREN 12304 - INDUSTRIAL VALVES - STEEL PLUG VALVES |
| DIN EN 15714-1:2010-02 | Industrial valves - Actuators - Part 1: Terminology and definitions |
| EN 1555-4:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
| I.S. EN 736-1:2018 | VALVES - TERMINOLOGY - PART 1: DEFINITION OF TYPES OF VALVES |
| UNI EN 15714-1 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 1: TERMINOLOGY AND DEFINITIONS |
| 16/30348709 DC : 0 | BS EN 17070 - INDUSTRIAL VALVES - MINIMUM PERFORMANCE REQUIREMENTS |
| DIN EN 12516-1:2015-01 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| UNE-EN 12516-1:2016 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| DIN EN 12201-4:2012-04 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
| DIN EN 19:2016-07 | Industrial valves - Marking of metallic valves |
| ONORM EN ISO 21787 : 2008 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN 13397:2002-03 | INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS |
| UNE-EN 1171:2016 | Industrial valves - Cast iron gate valves |
| BS EN 14339:2005 | Underground fire hydrants |
| UNE-EN 12266-1:2013 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| ISO 16138:2006 | Industrial valves Diaphragm valves of thermoplastics materials |
| BS EN 14384:2005 | Pillar fire hydrants |
| BS EN 12760:1999 | Valves. Socket welding ends for steel valves |
| BS EN 15081:2007 | Industrial valves. Mounting kits for part-turn valve actuator attachment |
| EN 13397:2001 | Industrial valves - Diaphragm valves made of metallic materials |
| EN 1171:2015 | Industrial valves - Cast iron gate valves |
| DIN EN 12266-2:2012-04 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| EN 1074-1:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements |
| EN 12567:2000 | Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests |
| DIN EN 15081:2008-03 | Industrial valves - Mounting kits for part-turn valve actuator attachment |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.