EN ISO 186:2002
Current
Current
The latest, up-to-date edition.
Paper and board - Sampling to determine average quality (ISO 186:2002)
Published date
15-03-2002
Publisher
Foreword
1. Scope
2. Normative reference
3. Terms and definitions
4. Principle
5. Procedure
6. Additional requirements
7. Sampling reports
Annex A (normative) Alternative sampling procedures
Bibliography
This Iinternational Standard specifies a method of obtaining a representative sample from a lot of paper or board, including solid and corrugated fibreboard (see ISO 4046:1978), for testing to determine whether or not its average quality complies with set specifications.It defines the conditions which apply when sampling is carried out to resolve disputes between buyer and seller relating to a defined lot of paper or board, which has been or is being delivered.NOTE If less than 50 % of the lot is available for sampling, then sampling in terms of this International Standard will be invalid in the absence of agreement to the contrary.The method is unsuitable for determining the variability within a lot.In cases where International Standards make reference to sampling according to this standard but where such sampling is impossible, impractical or inappropriate, and where no dispute is involved, guidance is given in normative annex A.
| Committee |
CEN/TC 172
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN ISO 186:2002 | Identical |
| UNI EN ISO 186 : 2003 | Identical |
| BS EN ISO 186:2002 | Identical |
| I.S. EN ISO 186:2002 | Identical |
| NEN EN ISO 186 : 2002 | Identical |
| ISO 186:2002 | Identical |
| DIN EN ISO 186 E : 2002 | Identical |
| NBN EN ISO 186 : 2002 | Identical |
| NBN EN 12858 : 1999 | Identical |
| NS EN ISO 186 : 2ED 2002 | Identical |
| PN EN ISO 186 : 2004 | Identical |
| SN EN ISO 186 : 2002 | Identical |
| NF EN ISO 186 : 2002 | Identical |
| SS-EN ISO 186 : 2002 | Identical |
| DIN EN ISO 186:2002-08 | Identical |
| 03/309374 DC : DRAFT JUNE 2003 | ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
| 03/312214 DC : DRAFT AUG 2003 | EN 1104 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE TRANSFER OF ANTIMICROBIAL CONSTITUENTS |
| BS EN 16640:2017 | Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method |
| 17/30353869 DC : DRAFT SEP 2017 | BS EN 17163 - PULP, PAPER AND BOARD - DETERMINATION OF PRIMARY AROMATIC AMINES (PAA) IN A WATER EXTRACT BY A LC/MS/MS METHOD |
| 16/30325910 DC : 0 | BS EN 233 - WALLCOVERINGS IN ROLL FORM - SPECIFICATION FOR FINISHED WALLPAPERS, WALL VINYLS AND PLASTICS WALLCOVERINGS |
| BS EN 60819-2:2002 | Non-cellulosic papers for electrical purposes Methods of test |
| 02/704679 DC : DRAFT MAY 2002 | PREN 648 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
| DIN EN 16453:2014-06 | PULP, PAPER AND PAPERBOARD - DETERMINATION OF PHTHALATES IN EXTRACTS FROM PAPER AND PAPERBOARD |
| DIN EN 648:2006-12 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
| DD ENV 12625-2:1999 | Tissue paper and tissue products Procedures for sampling and conditioning |
| I.S. EN 1104:2005 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFF - DETERMINATION OF TRANSFER OF ANTIMICROBIC CONSTITUENTS |
| I.S. EN 16785-1:2015 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| S.R. CEN/TS 16640:2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| I.S. EN 646:2006 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD |
| PREN 646 : DRAFT 2017 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD |
| DIN EN 16640:2015-09 (Draft) | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| DIN EN 1230-2:2010-02 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 2: OFF-FLAVOUR (TAINT) |
| DIN EN 646:2006-07 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD |
| 17/30345786 DC : 0 | BS EN 646 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD |
| I.S. EN 16640:2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| 17/30333593 DC : 0 | BS EN 17085 - PAPER AND BOARD - SAMPLING PROCEDURES FOR PAPER AND BOARD FOR RECYCLING |
| EN 60819-2:2001 | Non-cellulosic papers for electrical purposes - Part 2: Methods of test |
| DIN EN 15519 E : 2008 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - PREPARATION OF AN ORGANIC SOLVENT EXTRACT |
| BS EN ISO 15318:2000 | Pulp, paper and board. Determination of 7 specified polychlorinated biphenyls (PCB) |
| BS EN ISO 9862:2005 | Geosynthetics. Sampling and preparation of test specimens |
| EN 12281:2002 | Printing and business paper - Requirements for copy paper for dry toner imaging processes |
| DIN EN 14086:2003-04 | PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - 45 DEGREES GLOSS WITH A PARALLEL BEAM, DIN METHOD |
| EN 12858:1999 | Paper - Printing and business paper - Requirements for continuous stationery |
| EN 12283:2002 | Printing and business paper - Determination of toner adhesion |
| EN 1230-1:2009 | Paper and board intended to come into contact with foodstuffs — Sensory analysis — Part 1: Odour |
| CEN/TS 16640 : 2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| EN 16640:2017/AC:2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS EN 1104:2005 | Paper and board intended to come into contact with foodstuffs. Determination of the transfer of antimicrobial constituents |
| PREN 17163 : DRAFT 2017 | PULP, PAPER AND BOARD - DETERMINATION OF PRIMARY AROMATIC AMINES (PAA) IN A WATER EXTRACT BY A LC/MS/MS METHOD |
| I.S. EN 60819-3-3:2011 | NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED ARAMID (AROMATIC POLYAMIDE) PAPERS (IEC 60819-3-3:2011) |
| UNI EN 16453 : 2014 | PULP, PAPER AND PAPERBOARD - DETERMINATION OF PHTHALATES IN EXTRACTS FROM PAPER AND PAPERBOARD |
| EN 648:2006 | Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board |
| BS EN 648:2006 | Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board |
| DIN EN 14719 E : 2005 | PULP, PAPER AND BOARD - DETERMINATION OF THE DIISOPROPYLNAPHTHALENE (DIPN) CONTENT BY SOLVENT EXTRACTION |
| BS EN ISO 15755:2000 | Paper and board. Estimation of contraries |
| UNE-EN 1230-2:2010 | Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint) |
| I.S. EN 233:2016 | WALLCOVERINGS IN ROLL FORM - SPECIFICATION FOR FINISHED WALLPAPERS, WALL VINYLS AND PLASTICS WALLCOVERINGS |
| EN ISO 9073-4:1997 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 4: DETERMINATION OF TEAR RESISTANCE |
| I.S. EN 1230-1:2009 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 1: ODOUR |
| I.S. EN ISO 9073-4:1998 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 4: DETERMINATION OF TEAR RESISTANCE |
| DIN EN 16640:2017-08 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| 17/30345789 DC : 0 | BS EN 648 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
| 09/30201943 DC : 0 | BS EN ISO 12625-8 - TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER-ABSORPTION TIME AND WATER-ABSORPTION CAPACITY, BASKET- IMMERSION TEST METHOD |
| BS EN 16453:2014 | Pulp, paper and paperboard. Determination of phthalates in extracts from paper and paperboard |
| UNI EN 15519 : 2008 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - PREPARATION OF AN ORGANIC SOLVENT EXTRACT |
| 14/30304809 DC : 0 | BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| I.S. EN 1230-2:2009 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 2: OFF-FLAVOUR (TAINT) |
| I.S. EN 648:2006 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
| 08/30175646 DC : DRAFT MAR 2008 | BS EN 1230-2 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 2: OFF-FLAVOUR (TAINT) |
| EN 1104:2005 | Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents |
| CEI EN 60819-2 : 2002 | NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| CEI EN 60819-3-3 : 2012 | NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED ARAMID (AROMATIC POLYAMIDE) PAPERS |
| DIN EN 259-1:2001-12 | WALL COVERINGS IN ROLL FORM - HEAVY DUTY WALLCOVERINGS - PART 1: SPECIFICATIONS |
| BS EN 15519:2007 | Paper and board intended to come into contact with foodstuffs. Preparation of an organic solvent extract |
| UNE-EN 16640:2017 | Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method |
| ISO 15318:1999 | Pulp, paper and board Determination of 7 specified polychlorinated biphenyls (PCB) |
| BS EN 12281:2002 | Printing and business paper. Requirements for copy paper for dry toner imaging processes |
| EN ISO 15318 : 1999 | Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB) (ISO 15318:1999) |
| UNI EN 1230-1 : 2009 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 1: ODOUR |
| ENV 12625-2 : DRAFT 1999 | TISSUE PAPER AND TISSUE PRODUCTS - PART 2: PROCEDURES FOR SAMPLING AND CONDITIONING |
| UNI EN 1230-2 : 2009 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 2: OFF-FLAVOUR (TAINT) |
| 03/309373 DC : DRAFT JUNE 2003 | ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY |
| DD ENV 1798:1996 | Paper and board intended to come into contact with foodstuffs. Determination of seven specified polychlorinated biphenyls (PCB) |
| I.S. EN 12281:2002 | PRINTING AND BUSINESS PAPER - REQUIREMENTS FOR COPY PAPER FOR DRY TONER IMAGING PROCESSES |
| 04/30118282 DC : DRAFT AUG 2004 | EN ISO 12625-8 - TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER ABSORPTION TIME AND RESIDUAL WATER ABSORPTION CAPACITY, MANUAL AND AUTOMATED BASKET IMMERSION TEST METHOD |
| I.S. EN ISO 15318:2000 | PULP, PAPER AND BOARD - DETERMINATION OF 7 SPECIFIED POLYCHLORINATED BIPHENYLS (PCB) |
| 03/310721 DC : DRAFT JUNE 2003 | ISO 12625-9 - TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH |
| 03/309346 DC : DRAFT JUNE 2003 | EN 14719 - PULP, PAPER AND BOARD - DETERMINATION OF THE DIISOPROPYLNAPHTALENE (DIPN) CONTENT BY SOLVENT EXTRACTION |
| DIN EN 16453 E : 2014 | PULP, PAPER AND PAPERBOARD - DETERMINATION OF PHTHALATES IN EXTRACTS FROM PAPER AND PAPERBOARD |
| 06/30140039 DC : DRAFT MAR 2006 | EN 648 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
| BS EN 16785-1:2015 | Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| DD ENV 12281:1997 | Paper. Printing and business paper. Requirements for copy paper for dry toner imaging processes |
| 17/30348279 DC : 0 | BS EN 1104 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE TRANSFER OF ANTIMICROBIAL CONSTITUENTS |
| DIN EN 16785-1 E : 2016 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| UNE-EN 16785-1:2016 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| 08/30175643 DC : DRAFT MAR 2008 | BS EN 1230-1 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 1: ODOUR |
| 15/30326869 DC : 0 | BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| 02/108178 DC : DRAFT JAN 2003 | EN ISO 9862 - GEOSYNTHETICS - SAMPLING AND PREPARATION OF TEST SPECIMENS |
| BS EN 60819-3-3:2011 | Non-cellulosic papers for electrical purposes Specifications for individual materials. Sheet 3: Unifilled aramid (aromatic polyamide) papers |
| UNI CEN/TS 16640 : 2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| DIN EN 1104:2005-11 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS; DETERMINATION OF TRANSFER OF ANTIMICROBIC CONSTITUENTS |
| PREN 233 : DRAFT 2016 | WALLCOVERINGS IN ROLL FORM - SPECIFICATION FOR FINISHED WALLPAPERS, WALL VINYLS AND PLASTICS WALLCOVERINGS |
| EN 1230-2:2009 | Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint) |
| BS EN 14086:2003 | Paper and board. Measurement of specular gloss. 45° gloss with a parallel beam, DIN method |
| BS EN ISO 9706:2000 | Information and documentation. Paper for documents. Requirements for permanence |
| UNE-EN 233:2017 | Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings |
| ISO 9862:2005 | Geosynthetics — Sampling and preparation of test specimens |
| BS EN 259-1:2001 | Wallcoverings in roll form. Heavy duty wallcoverings Specifications |
| ISO 9706:1994 | Information and documentation — Paper for documents — Requirements for permanence |
| UNE-EN 1230-1:2010 | Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour |
| BS EN 1230-1:2001 | Paper and board intended for contact with foodstuffs. Sensory analysis Odour |
| ISO 15755:1999 | Paper and board Estimation of contraries |
| ISO 9073-7:1995 | Textiles — Test methods for nonwovens — Part 7: Determination of bending length |
| BS EN 1230-2:2009 | Paper and board intended to come into contact with foodstuffs. Sensory analysis Off-flavour (taint) |
| ISO 9073-8:1995 | Textiles — Test methods for nonwovens — Part 8: Determination of liquid strike-through time (simulated urine) |
| BS EN ISO 9073-8:1998 | Textiles. Test methods for nonwovens Determination of liquid strike-through time (simulated urine) |
| BS EN 14719:2005 | Pulp, paper and board. Determination of the diisopropylnaphthalene (DIPN) content by solvent extraction |
| EN 259-1:2001 | Wallcoverings in roll form - Heavy duty wallcoverings - Part 1: Specifications |
| EN 14719:2005 | Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction |
| EN 233:1999 | Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings |
| EN 15519:2007 | Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract |
| EN 16785-1:2015 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| EN ISO 9862:2005 | Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005) |
| EN 14086:2003 | Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method |
| EN ISO 9073-7:1998 | Textiles - Test methods for nonwovens - Part 7: Determination of bending length (ISO 9073-7:1995) |
| EN 13676:2001 | Polymer coated paper and board intended for food contact - Detection of pinholes |
| EN ISO 15755:1999 | Paper and board - Estimation of contraries (ISO 15755:1999) |
| EN ISO 9706:1998 | Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994) |
| EN 16453:2014 | Pulp, paper and paperboard - Determination of phthalates in extracts from paper and paperboard |
| EN ISO 9073-8:1998 | Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995) |
| 03/310720 DC : DRAFT JUNE 2003 | ISO 12625-6 - TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMAGE |
| DIN EN 16640 E : 2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| I.S. EN ISO 9862:2005 | GEOSYNTHETICS - SAMPLING AND PREPARATION OF TEST SPECIMENS |
| PREN 1104 : DRAFT 2017 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE TRANSFER OF ANTIMICROBIAL CONSTITUENTS |
| DIN EN 16785-1:2016-03 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| I.S. EN 12283:2002 | PRINTING AND BUSINESS PAPER - DETERMINATION OF TONER ADHESION |
| PD CEN/TS 16640:2014 | Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method |
| 03/310738 DC : DRAFT JULY 2003 | EN 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| I.S. EN 16453:2014 | PULP, PAPER AND PAPERBOARD - DETERMINATION OF PHTHALATES IN EXTRACTS FROM PAPER AND PAPERBOARD |
| NF EN 60819-2 : 2002 | NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| EN 646:2006 | Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board |
| ONORM EN 1104 : 2005 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE TRANSFER OF ANTIMICROBIAL CONSTITUENTS |
| BS EN 646:2006 | Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board |
| PREN 648 : DRAFT 2017 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD |
| I.S. ENV 12625-2:1999 | TISSUE PAPER AND TISSUE PRODUCTS - PART 2: PROCEDURES FOR SAMPLING AND CONDITIONING |
| DIN EN 1230-1:2010-02 | Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour |
| DIN EN ISO 9862 E : 2005 | GEOSYNTHETICS - SAMPLING AND PREPARATION OF TEST SPECIMENS |
| DIN EN ISO 9073-2:1997-02 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 2: DETERMINATION OF THICKNESS |
| BS EN 13676:2001 | Polymer coated paper and board intended for food contact. Detection of pinholes |
| BS EN 12283:2002 | Printing and business paper. Determination of toner adhesion |
| BS EN 233:2016 | Wallcoverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings |
| BS EN 12858:1999 | Paper. Printing and business paper. Requirements for continuous stationery |
| BS EN ISO 9073-7:1998 | Textiles. Test methods for nonwovens Determination of bending length |
| ISO 9073-4:1997 | Textiles Test methods for nonwovens Part 4: Determination of tear resistance |
| DIN EN 14719:2005-10 | Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction |
| DIN EN ISO 9862:2005-05 | Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005) |
| DIN EN 15519:2008-01 | Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract |
| EN 60819-3-3:2011 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers |
| ISO 2859-3:2005 | Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures |
| ISO 3951:1989 | Sampling procedures and charts for inspection by variables for percent nonconforming |
| ISO 2859-2:1985 | Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
| ISO 4046:1978 | Paper, board, pulp and related terms — Vocabulary |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.