![header thumbnail](/images/img-default-logo.png)
EN ISO 2063:2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/img-default-logo.png)
Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005)
01-10-2017
01-03-2005
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Manner of specifying requirements
5 Classification
6 Manufacture
6.1 Preparation of surfaces to be coated by thermal
spraying
6.2 Coating metal
6.3 Thermal spraying
6.4 Sealing
6.5 Painting
7 Required characteristics
7.1 Thickness
7.2 Appearance
7.3 Adhesion
8 Test methods
8.1 Measurement of thickness
8.2 Adhesion test
Annex A (informative) Adhesion test methods
A.1 Grid test
A.2 Tensile test method
Annex B (informative) Recommendations for use
Annex ZA (normative) Normative references to International
publications with their corresponding
European publications
Bibliography
ISO 2063:2005 applies to thermal-sprayed metallic coatings for the protection of iron and steel against corrosion by applying zinc or aluminium or their alloys to uncoated surfaces to be protected.This International Standard deals with characteristic properties and gives test methods for coatings obtained by the spraying of zinc and aluminium and their alloys for the general purpose of corrosion protection.It gives firstly the definition, classification and symbols for these coatings in relation to their thickness.It then deals with the preparation of surfaces, application of coatings and their characteristic properties: namely, thickness, appearance and adhesion.Finally ISO 2063:2005 gives test methods for checking these properties.
Committee |
CEN/TC 240
|
DevelopmentNote |
Supersedes EN 22063 (08/2005)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NEN EN ISO 2063 : 2005 | Identical |
PN EN ISO 2063 : 2006 | Identical |
DIN EN ISO 2063:2005-05 | Identical |
NS EN ISO 2063 : 1ED 2005 | Identical |
SN EN ISO 2063 : 2005 | Identical |
NBN EN ISO 2063 : 2005 | Identical |
BS EN ISO 2063:2005 | Identical |
ISO 2063:2005 | Identical |
UNE-EN ISO 2063:2005 | Identical |
UNI EN ISO 2063 : 2005 | Identical |
NF EN ISO 2063 : 2005 | Identical |
I.S. EN ISO 2063:2005 | Identical |
UNE-EN 50341-1:2017 | Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications |
01/122577 DC : DRAFT JUNE 2001 | BS EN 1765 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES |
15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
08/30175210 DC : DRAFT APR 2008 | BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
UNI EN 13507 : 2010 | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
BS EN 50341-1:2012 | Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications |
BS EN 1765:2004 | Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies |
BS EN 14616:2004 | Thermal spraying. Recommendations for thermal spraying |
DIN EN 15520:2007-11 | Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings |
DIN EN 14616:2005-02 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
I.S. EN 15311:2007 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
I.S. EN 50341-1:2012 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN 14475:2006-04 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
UNE-EN 1765:2017 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
I.S. EN 15773:2018 | INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
16/30323507 DC : 0 | BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
UNI EN 15773 : 2009 | INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES (DUPLEX SYSTEMS) - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
CEI EN 50341-1 : 2013 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNE-EN 15773:2010 | Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines |
EN 50341-1:2012 | Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications |
DIN EN 15520 E : 2007 | THERMAL SPRAYING - RECOMMENDATIONS FOR CONSTRUCTIONAL DESIGN OF COMPONENTS WITH THERMALLY SPRAYED COATINGS |
EN ISO 14924:2005 | Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005) |
UNI EN 14475 : 2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
BS EN 13507:2010 | Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying |
10/30196823 DC : 0 | BS ISO 12670 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
12/30260570 DC : 0 | BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
I.S. EN 13507:2010 | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
EN 13507:2010 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
DIN EN 14475 E : 2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
BS EN 14475:2006 | Execution of special geotechnical works. Reinforced fill |
ISO 14924:2005 | Thermal spraying Post-treatment and finishing of thermally sprayed coatings |
UNE-EN 14475:2011 | Execution of special geotechnical works - Reinforced fill |
BS EN 15311:2007 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
I.S. EN 15520:2007 | THERMAL SPRAYING - RECOMMENDATIONS FOR CONSTRUCTIONAL DESIGN OF COMPONENTS WITH THERMALLY SPRAYED COATINGS |
EN 14616:2004 | Thermal spraying - Recommendations for thermal spraying |
EN 15311:2007 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
EN 14475:2006/AC:2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL |
EN 15520:2007 | Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings |
PREN 50341-1 : DRAFT 2012 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
UNE-EN 13507:2011 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
PREN 15773 : DRAFT 2016 | INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
EN 15773:2018 | Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines |
08/30183878 DC : DRAFT AUG 2008 | BS EN 13507 - THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN 13507:2016-07 (Draft) | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
BS EN 15520:2007 | Thermal spraying. Recommendations for constructional design of components with thermally sprayed coatings |
BS EN ISO 14924:2005 | Thermal spraying. Post-treatment and finishing of thermally sprayed coatings |
DIN EN 15311:2007-06 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
DIN EN ISO 14924:2005-11 | Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005) |
ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ISO 12944-6:1998 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
EN ISO 11124-2:1997 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993) |
ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
ISO 11126-4:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag |
ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
EN ISO 2064 : 2000 | METALLIC AND OTHER INORGANIC COATINGS - DEFINITIONS AND CONVENTIONS COVERING THE MEASUREMENT OF THICKNESS |
EN ISO 11126-4:1998 | Preparation of steel substrates before application of paintsand related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993) |
ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
ISO 12944-8:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance |
EN ISO 11126-7:1999 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995) |
ISO 11126-3:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag |
ISO 11124-2:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 2: Chilled-iron grit |
EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
EN ISO 11126-3:1997 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993) |
ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
ISO 12944-3:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations |
EN ISO 14919:2015 | Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015) |
EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
EN 13507:2010 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
ISO 14919:2015 | Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions |
ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.