EN ISO 354:2003
Current
Current
The latest, up-to-date edition.
Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
Published date
15-05-2003
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Frequency range
6 Test arrangement
6.1 Reverberation room and diffusion of sound field
6.2 Test specimens
6.3 Temperature and relative humidity
7 Measurement of reverberation time
7.1 General
7.2 Interrupted noise method
7.3 Integrated impulse response method
7.4 Evaluation of reverberation times based on decay
curves
8 Expression of results
8.1 Method of calculation
8.2 Precision
8.3 Presentation of results
9 Test report
Annex A (normative) - Diffusivity of the sound field in the
reverberation room
Annex B (normative) - Test specimen mountings for sound
absorption tests
Bibliography
Annex ZA (normative) - Normative references to international
publications with their relevant European
publications
ISO 354:2003 specifies a method of measuring the sound absorption coefficient of acoustical materials used as wall or ceiling treatments, or the equivalent sound absorption area of objects, such as furniture, persons or space absorbers, in a reverberation room. It is not intended to be used for measuring the absorption characteristics of weakly damped resonators.The results obtained can be used for comparison purposes and for design calculation with respect to room acoustics and noise control.
| Committee |
CEN/TC 126
|
| DevelopmentNote |
Supersedes EN 20354. (06/2007)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN ISO 354 : 2003 | Identical |
| ISO 354:2003 | Identical |
| UNI EN ISO 354 : 2003 | Identical |
| NBN EN ISO 354 : 2003 | Identical |
| SS-EN ISO 354 : 2003 | Identical |
| UNE-EN ISO 354:2004 | Identical |
| PN EN ISO 354 : 2005 | Identical |
| SN EN ISO 354 : 2003 | Identical |
| BS EN ISO 354:2003 | Identical |
| I.S. EN ISO 354:2003 | Identical |
| NF EN ISO 354 : 2004 | Identical |
| NS EN ISO 354 : 2ED 2003 | Identical |
| DIN EN ISO 354:2003-12 | Identical |
| 15/30315069 DC : DRAFT MAY 2015 | BS EN 14313 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| BS EN 14509:2013 | Self-supporting double skin metal faced insulating panels. Factory made products. Specifications |
| PREN 12733 : DRAFT 2016 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| 15/30328765 DC : 0 | BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| BS EN 61481-1:2014 | Live working. Phase comparators Capacitive type to be used for voltages exceeding 1 kV a.c. |
| I.S. EN 13297:2007 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| PREN 14313 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| 15/30321297 DC : 0 | BS EN 1793-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| PREN 13279-1 : DRAFT 2017 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 1793-4:2015-05 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION |
| 08/30171552 DC : DRAFT JAN 2008 | BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 14509:2013-12 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| 08/30169559 DC : DRAFT APR 2008 | BS EN 13171 - THERMAL INSULATING PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| PD CEN/TR 15226:2006 | Building products. Treatment of acoustics in product technical specifications |
| 08/30169531 DC : DRAFT APR 2008 | BS EN 13162 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| I.S. EN 16487:2014 | ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION |
| 02/120714 DC : 0 | PREN 14318-1 - THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE FOAM (PUR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID POLYURETHANE DISPENSE SYSTEM BEFORE INSTALLATION |
| 05/30135872 DC : 0 | EN 15283-2 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| I.S. EN 16272-4:2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION UNDER DIRECT SOUND FIELD |
| I.S. EN 50636-2-100:2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-100: PARTICULAR REQUIREMENTS FOR HAND-HELD MAINS-OPERATED GARDEN BLOWERS, VACUUMS AND BLOWER VACUUMS |
| DD CEN/TS 15398:2006 | Resilient, textile and laminate floor coverings. Floor covering standard symbols |
| 05/30136556 DC : 0 | PREN 14313 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATION - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| DIN EN 14303:2016-08 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| DIN EN 16069:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION |
| PREN 13169 : DRAFT 2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION |
| DIN EN 14304:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| I.S. EN 15101-1:2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| S.R. CEN/TS 15398:2016 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS - COMPLEMENTARY ELEMENT |
| I.S. EN 16069:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION |
| PREN 12602 : DRAFT 2015 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| EN 15102:2007+A1:2011 | Decorative wall coverings - Roll and panel form |
| 12/30268937 DC : 0 | BS EN 16491 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION |
| 14/30303797 DC : 0 | BS EN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| UNI EN 15101-1 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| UNE-EN 14318-1:2013 | Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation |
| I.S. CEN/TR 15226:2006 | BUILDING PRODUCTS - TREATMENT OF ACOUSTICS IN PRODUCT TECHNICAL SPECIFICATIONS |
| EN 15101-1:2013 | Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation |
| UNE-EN 1307:2014 | Textile floor coverings - Classification |
| I.S. EN 14915:2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element |
| EN 14915:2013+A1:2017 | Solid wood panelling and cladding - Characteristics, requirements and marking |
| DIN EN 13169:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION |
| DIN EN 12354-6:2004-04 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces |
| DIN EN 13683:2013-08 | Garden equipment - Integrally powered shredders/chippers - Safety |
| BS EN ISO 140-6:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of impact sound insulation of floors |
| BS EN 786 : 1996 | GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY |
| BS EN 14190:2014 | Gypsum board products from reprocessing. Definitions, requirements and test methods |
| BS EN 438-7:2005 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| BS EN 12354-6:2003 | Building acoustics. Estimation of acoustic performance of buildings from the performance of elements Sound absorption in enclosed spaces |
| BS EN 520 : 2004 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN 13168 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
| I.S. EN 13168:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
| I.S. EN 13165:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| UNI EN 1218-5 : 2010 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN |
| I.S. EN 14910:2007 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| DIN EN 13815:2006-12 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| EN 61243-3:2014/AC:2015 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| DIN EN 13813:2003-01 | SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIALS - PROPERTIES AND REQUIREMENTS |
| EN 12354-6:2003 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| CEN/TR 15226:2006 | Building products - Treatment of acoustics in product technical specifications |
| EN 50636-2-94:2014 | Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears |
| EN 61481-1:2014 | Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
| DIN EN 13915:2017-09 | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 13162:2012+A1:2015 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
| EN 50636-2-100:2014 | Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums |
| EN 1218-4:2004+A2:2009 | Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) |
| PREN 1307 : DRAFT 2012 | TEXTILE FLOOR COVERINGS - CLASSIFICATION |
| DIN EN 16487:2015-02 | ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION |
| 14/30298593 DC : 0 | BS EN 1793-4 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION |
| 16/30330679 DC : DRAFT MAR 2016 | BS EN 16977 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION |
| PREN 14915 : DRAFT 2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| 08/30169546 DC : DRAFT APR 2008 | BS EN 13167 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| UNE-EN 16272-4:2017 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field |
| BS EN 15283-1 : 2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| 13/30266550 DC : 0 | BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNE-EN 13684:2005 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety |
| I.S. EN 1470:2008 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS |
| BS EN 60335-2-77:2010 | Safety of household and similar appliances Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| UNE-EN 61481-1:2015 | Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
| EN 1218-5:2004+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain |
| BS EN 16487:2014 | Acoustics. Test code for suspended ceilings. Sound absorption |
| DIN EN 15283-2:2009-12 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards (includes Amendment A1:2009) |
| PD CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings. Floor covering standard symbols. Complementary element |
| 10/30213980 DC : 0 | BS EN 13169 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION |
| UNI EN 15283-1 : 2009 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| DIN EN 12602:2015-12 (Draft) | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| 10/30213986 DC : 0 | BS EN 13171 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| PREN 13165 : DRAFT 2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| 12/30256888 DC : 0 | BS EN 1307 - TEXTILE FLOOR COVERINGS - CLASSIFICATION |
| BS EN 14303 : 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| 01/715188 DC : DRAFT NOV 2001 | PREN 774 - GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY |
| 08/30169552 DC : DRAFT APR 2008 | BS EN 13169 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED PERLITE (EPB) - SPECIFICATION |
| I.S. EN 14305:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| PREN 14304 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| PREN 14374 : DRAFT 2016 | TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS |
| DIN EN 14313:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| BS EN 61243-3:2014 | Live working. Voltage detectors Two-pole low-voltage type |
| I.S. EN 14315-1:2013 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
| PREN 14305 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| I.S. EN 14304:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| I.S. EN 1793-4:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION |
| BS EN 14304 : 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| I.S. EN 50636-2-91:2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS |
| I.S. EN 50636-2-92:2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-92: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED MAINS-OPERATED LAWN SCARIFIERS AND AERATORS |
| I.S. EN 14303:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| DIN EN 15101-1:2013-12 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| DIN EN 13279-1:2008-11 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 13170:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| DIN EN 13165:2016-09 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| DIN EN 13168:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
| DIN EN 1520:2011-06 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| DIN EN 13162:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| DIN EN 1793-1:2015-06 (Draft) | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| DIN EN 14366:2005-02 | LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
| DIN EN 13986:2015-06 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| DIN EN 14246:2006-09 | Gypsum elements for suspended ceilings - Definitions, requirements and test methods |
| DIN EN 14910:2009-08 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| BS EN 774:1996 | Garden equipment. Hand held, integrally powered hedge trimmers. Safety |
| BS EN 13169 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION |
| BS EN 836 : 1997 | GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY |
| DIN EN 1218-4:2009-12 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S) |
| DIN EN 1470:1998-01 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS |
| I.S. EN 1218-2:2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS |
| I.S. EN 786:1996 | GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY |
| I.S. EN 1520:2011 | PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT |
| I.S. EN 12750:2013 | SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| I.S. EN 13915:2017 | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 13167:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| I.S. EN 13683:2003 | GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY |
| DIN EN 13297:2000-11 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| DIN EN 12602:2016-12 | Prefabricated reinforced components of autoclaved aerated concrete |
| I.S. EN 13171:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| I.S. EN 13170:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| I.S. EN 1218-5:2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN |
| I.S. EN 13986:2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 520:2005 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 13169:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION |
| I.S. EN 13162:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| I.S. EN 13950:2014 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 1793-1:2017 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| I.S. EN 13964:2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14190:2014 | GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 1470 : 2008 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS |
| VDI 3762:2012-01 | Sound insulation by means of raised access floors and hollow floors |
| VDI 3755:2015-01 | Sound insulation and sound absorption of suspended ceilings |
| 15/30315075 DC : DRAFT MAY 2015 | BS EN 14305 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| 02/701820 DC : 0 | BS EN 14303 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| 10/30213983 DC : 0 | BS EN 13170 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| DIN EN 12733:2016-08 (Draft) | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| DIN EN 16272-1:2013-01 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption in the laboratory under diffuse sound field conditions |
| 13/30258117 DC : 0 | BS EN 15101-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| DIN EN 15283-1:2009-12 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement (includes Amendment A1:2009) |
| UNI EN 15283-2 : 2009 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| DIN EN 15498:2008-08 | PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| 12/30268211 DC : 0 | BS EN 16487 - ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION |
| UNE-EN 60335-2-77:2011 | Safety of household and similar appliances -- Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| BS EN 16069 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION |
| PREN 13167 : DRAFT 2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| 11/30243088 DC : 0 | BS EN 16272-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS - SOUND ABSORPTION IN THE LABORATORY UNDER DIFFUSE SOUND FIELD CONDITIONS |
| UNE-EN 14305:2017 | Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification |
| 01/105976 DC : DRAFT JULY 2001 | PREN 14246 - GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 08/30169549 DC : DRAFT APR 2008 | BS EN 13168 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
| BS EN 50636-2-94:2014 | Household and similar electrical appliances. Safety Particular requirements for scissors type grass shears |
| BS EN 50434:2014 | Safety of household and similar appliances. Particular requirements for mains operated shredders and chippers |
| 10/30213977 DC : 0 | BS EN 13168 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
| BS EN 16272-4:2016 | Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound diffraction under direct sound field |
| DIN EN 14315-1:2013-04 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
| 05/30138009 DC : DRAFT AUG 2005 | EN 15319 - GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS |
| 02/560743 DC : DRAFT FEB 2002 | BS EN 14366 - LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
| 02/120711 DC : 0 | PREN 14315-1 - THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE FOAM (PUR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
| 04/30126133 DC : DRAFT NOV 2004 | EN 15100-1 - THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED UREAFORMALDEHYDE FOAM (UF) PRODUCTS - PART 1: SPECIFICATION FOR THE FOAM SYSTEM BEFORE INSTALLATION |
| BS EN 50636-2-92:2014 | Household and similar electrical appliances. Safety Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators |
| 10/30213974 DC : 0 | BS EN 13167 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| BS EN 15498:2008 | Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance |
| 08/30169556 DC : DRAFT APR 2008 | BS EN 13170 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| 10/30218976 DC : DRAFT JUNE 2010 | BS EN 1793-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION |
| UNE-EN 14313:2017 | Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification |
| BS EN 60335-2.77 : 2010 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| PREN 13162 : DRAFT 2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| 15/30304107 DC : DRAFT MAY 2015 | BS EN 13684 - GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| DIN EN 14305:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| BS EN 50636-2-107:2015 | Safety of household and similar appliances Particular requirements for robotic battery powered electrical lawnmowers |
| PREN 438-7 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| I.S. EN 50636-2-94:2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-94: PARTICULAR REQUIREMENTS FOR SCISSORS TYPE GRASS SHEARS |
| BS EN 1307 : 2014 | TEXTILE FLOOR COVERINGS - CLASSIFICATION |
| PREN 14190 : DRAFT 2011 | GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 12733 : 2009 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| NF EN 13684 : 2004 + A3 2010 | |
| PREN 14509 : DRAFT 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| I.S. EN 1307:2014 | TEXTILE FLOOR COVERINGS - CLASSIFICATION |
| EN 50636-2-107 : 2015 AMD 1 2018 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| DIN EN 13684:2015-05 (Draft) | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| UNI EN 15498 : 2008 | PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| EN 1307:2014+A2:2018 | Textile floor coverings - Classification |
| EN 13684:2004+A3:2009 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety |
| PREN 13171 : DRAFT 2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| PREN 13915 : DRAFT 2016 | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNE-EN 16272-1:2013 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption in the laboratory under diffuse sound field conditions |
| I.S. EN 14509:2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| I.S. EN 15498:2008 | PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| BS EN 13684 : 2004 | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| DIN EN 13171:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| DIN EN 12750:2013-05 | Safety of woodworking machines - Four sided moulding machines |
| DIN EN 1470:2009-02 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS |
| DIN EN 13167:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| DIN EN 786:2012-01 | GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY |
| DIN EN 438-7:2005-04 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005 |
| DIN EN 13950:2014-09 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 13915:2016-02 (Draft) | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 13964:2014-08 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 15114:2008-11 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF TEXTILE FLOOR COVERINGS WITHOUT PILE |
| UNE-EN 14509:2014 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| BS EN 1218-2 : 2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS |
| BS EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| BS EN 15114 : 2006 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF TEXTILE FLOOR COVERINGS WITHOUT PILE |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| I.S. EN 14366:2005 | LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS |
| EN 13986:2004+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 16272-1:2012 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption in the laboratory under diffuse sound field conditions |
| EN 15283-1:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement |
| EN 13964:2014 | Suspended ceilings - Requirements and test methods |
| UNI EN 13683 : 2011 | GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY |
| UNI EN 14509 : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNI EN 14910 : 2010 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| UNI EN 786 : 2010 | GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY |
| UNI EN 520 : 2009 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 12750 : 2013 | SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| UNI EN 15114 : 2008 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF TEXTILE FLOOR COVERINGS WITHOUT PILE |
| UNI EN 1218-4 : 2009 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S) |
| UNI EN 1520 : 2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement |
| UNI EN 14190 : 2014 | GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 13964 : 2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| EN 1793-1:2017 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions |
| UNI EN 836 : 2011 | GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY |
| UNI EN 14246 : 2006 | GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 13279-1 : 2008 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| UNI EN 13950 : 2014 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 00/105211 DC : DRAFT JULY 2000 | PREN 13950 - GYPSUM PLASTERBOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 13684 : 2010 | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| I.S. CEN TS 15398:2006 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS |
| UNI EN 16272-1 : 2012 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS - SOUND ABSORPTION IN THE LABORATORY UNDER DIFFUSE SOUND FIELD CONDITIONS |
| 15/30315090 DC : DRAFT MAY 2015 | BS EN 14304 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| BS EN 50636-2-91:2014 | Household and similar electrical appliances. Safety Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
| PREN 13170 : DRAFT 2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| 05/30136552 DC : 0 | PREN 14304 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) - SPECIFICATION |
| PREN 14303 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| UNI EN 14315-1 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
| UNI EN 14318-1 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION |
| PREN 13168 : DRAFT 2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
| 02/102019 DC : DRAFT FEB 2002 | PREN 12354-6 - BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 6: SOUND ABSORPTION IN ENCLOSED SPACES |
| PREN 13684 : DRAFT 2015 | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| 06/30155788 DC : DRAFT SEP 2006 | BS EN 13297 - TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| 11/30251988 DC : 0 | BS EN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN 1793-4:2015 | Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound diffraction |
| BS EN 14315-1:2013 | Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the rigid foam spray system before installation |
| BS EN 14318-1:2013 | Thermal insulating products for buildings. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the rigid foam dispensed system before installation |
| UNE-EN 16487:2015 | Acoustics - Test code for suspended ceilings - Sound absorption |
| 00/107014 DC : DRAFT OCT 2000 | PREN 520 - GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 16487 : 2015 | ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION |
| 00/106800 DC : DRAFT OCT 2000 | PREN 13915 - PREFABRICATED GYPSUM WALLBOARD PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 10/30213959 DC : 0 | BS EN 13162 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| BS EN 16272-1:2012 | Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. Sound absorption in the laboratory under diffuse sound field conditions |
| 08/30169540 DC : DRAFT APR 2008 | BS EN 13165 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) PRODUCTS - SPECIFICATION |
| BS EN 12733 : 2001 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| 14/30297521 DC : 0 | BS EN 16272-4 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION UNDER DIRECT SOUND FIELD CONDITIONS |
| 05/30135869 DC : 0 | EN 15283-1 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| 17/30357433 DC | BS EN 13279-1. Gypsum binders and gypsum plasters. Part 1. Definitions and requirements |
| UNE-EN 1793-4:2015 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction |
| PREN 15101-1 : DRAFT 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| PREN 15102 : DRAFT 2016 | DECORATIVE WALLCOVERINGS - ROLL FORM |
| 16/30342849 DC : 0 | BS EN 12733 - AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| DIN EN 15102:2016-02 (Draft) | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| I.S. EN 13684:2004 | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| UNI EN 15102 : 2011 | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| I.S. EN 61243-3:2014 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| PREN 16491 : DRAFT 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION |
| CEI EN 50636-2-92 : 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-92: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED MAINS-OPERATED LAWN SCARIFIERS AND AERATORS |
| I.S. EN 12733:2001 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| I.S. EN 14313:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| I.S. EN 15102:2007 | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| UNE-EN 12602:2011 | Prefabricated reinforced components of autoclaved aerated concrete |
| I.S. EN 13279-1:2008 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 14190:2014-09 | Gypsum board products from reprocessing - Definitions, requirements and test methods |
| DIN EN 836:2012-07 | GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY |
| BS EN ISO 140-4:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation between rooms |
| BS EN 13950:2014 | Gypsum board thermal/acoustic insulation composite panels. Definitions, requirements and test methods |
| BS EN 13915:2017 | Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods |
| UNE-EN 1793-1:2017 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions |
| BS EN 13167 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| BS EN 13683 : 2003 | GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY |
| BS EN 13815:2006 | Fibrous gypsum plaster casts. Definitions, requirements and test methods |
| BS EN 13171 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| BS EN 13165 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| BS EN 14474:2004 | Precast concrete products. Concrete with wood-chips as aggregate. Requirements and test methods |
| UNE-EN 13167:2013 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification |
| BS EN 1218-4 : 2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S) |
| BS EN ISO 11654:1997 | Acoustics. Sound absorbers for use in buildings. Rating of sound absorption |
| BS EN 15102 : 2007 | DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
| UNE-EN 13169:2013 | Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification |
| BS EN 13297:2007 | Textile floor coverings. Classification of needled pile floor coverings |
| UNE-EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines |
| BS EN 1218-5 : 2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN |
| BS EN 12750:2013 | Safety of woodworking machines. Four sided moulding machines |
| DIN EN 15319:2007-10 | General principles of design of fibrous (gypsum) plaster works |
| UNE-EN 14190:2014 | Gypsum board products from reprocessing - Definitions, requirements and test methods |
| BS EN 13162 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| BS EN 13813:2002 | Screed material and floor screeds. Screed material. Properties and requirements |
| UNE-EN 13162:2013 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
| UNE-EN 13165:2013 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification |
| BS EN 13279-1:2008 | Gypsum binders and gypsum plasters Definitions and requirements |
| UNE-EN 520:2005 | Gypsum plasterboards - Definitions, requirements and test methods |
| UNE-EN 13171:2013 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
| BS EN 14246:2006 | Gypsum elements for suspended ceilings. Definitions, requirements and test methods |
| UNE-EN 16069:2013 | Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification |
| UNE-EN 13170:2013 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification |
| UNE-EN 13168:2013 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification |
| BS EN ISO 140-7:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of impact sound insulation of floors |
| BS EN ISO 140-5:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation of facade elements and facades |
| UNE-EN 13986:2006 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| UNE-EN 61243-3:2015 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
| EN 14190:2014 | Gypsum board products from reprocessing - Definitions, requirements and test methods |
| EN 13950:2014 | Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
| EN 14366:2004 | Laboratory measurement of noise from waste water installations |
| EN 15283-2:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards |
| EN 16272-4:2016 | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field |
| EN 14305:2015 | Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification |
| EN 13168:2012+A1:2015 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification |
| EN 1470:2008 | Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings |
| EN 520:2004+A1:2009 | Gypsum plasterboards - Definitions, requirements and test methods |
| EN 15498:2008 | Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance |
| EN 14910:2007+A1:2009 | Garden equipment - Walk-behind combustion engine powered trimmers - Safety |
| EN 13815:2006 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| EN 14509:2013 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| EN 16069:2012+A1:2015 | Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification |
| EN 13171:2012+A1:2015 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
| EN 14474:2004 | Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods |
| EN 13915:2017 | Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods |
| EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| EN 14304:2015 | Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification |
| EN 774:1996/A3:2001 | GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY |
| EN 438-7:2005 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| EN 15114:2006+A1:2008 | Textile floor coverings - Classification of textile floor coverings without pile |
| EN 16487:2014 | Acoustics - Test code for suspended ceilings - Sound absorption |
| EN 14315-1:2013 | Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation |
| EN 15319:2007 | General principles of design of fibrous (gypsum) plaster works |
| EN 14318-1:2013 | Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation |
| EN 14313:2015 | Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification |
| EN 786:1996+A2:2009 | Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety |
| EN 14303:2015 | Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
| EN 13813:2002 | Screed material and floor screeds - Screed material - Properties and requirements |
| EN 836:1997+A4:2011 | Garden equipment - Powered lawnmowers - Safety |
| DIN EN 14318-1:2013-04 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION |
| CEI EN 50636-2-94 : 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-94: PARTICULAR REQUIREMENTS FOR SCISSORS TYPE GRASS SHEARS |
| I.S. EN 438-7:2005 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| UNE-EN 15319:2012 | General principles of design of fibrous (gypsum) plaster works |
| I.S. EN 50636-2-107:2015 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| I.S. EN 774:1996 | GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY |
| CEI EN 60335-2-77 : 2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| BS EN 50636-2-100:2014 | Household and similar electrical appliances. Safety Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums |
| 04/30111716 DC : DRAFT MAR 2004 | EN 14910 - GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| 10/30213968 DC : 0 | BS EN 13165 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| 12/30260496 DC : 0 | BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| EN 1218-2:2004+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains |
| BS EN 15283-2 : 2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| PREN 1793-1 : DRAFT 2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS |
| UNE-EN 13915:2018 | Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods |
| 13/30217369 DC : 0 | BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| 15/30315093 DC : DRAFT MAY 2015 | BS EN 14303 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| 13/30268273 DC : 0 | BS EN 14915 - SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| 10/30213989 DC : 0 | BS EN 16069 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION |
| BS EN 14305:2015 | Thermal insulation products for building equipment and industrial installations. Factory made cellular glass (CG) products. Specification |
| CEI EN 50636-2-107 : 2016 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| 16/30332917 DC : 0 | BS EN 13915 - PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNE-EN 14315-1:2013 | Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane foam (PUR) products. Part 1: Specification for the rigid foam spray system before installation |
| UNE-EN 15102:2008 | Decorative wallcoverings - Roll and panel form products |
| 08/30179926 DC : DRAFT MAR 2008 | BS EN 60335-2-77 - SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| I.S. EN 16272-1:2012 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS - SOUND ABSORPTION IN THE LABORATORY UNDER DIFFUSE SOUND |
| I.S. EN 15283-1:2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| CEI EN 50636-2-100 : 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR HAND-HELD MAINS-OPERATED GARDEN BLOWERS, VACUUMS AND BLOWER VACUUMS |
| UNE-EN 15101-1:2015 | Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation |
| BS EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| PREN 13964 : DRAFT 2013 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN 15101-1:2013 | Thermal insulation products for buildings. In-situ formed loose fill cellulose (LFCI) products Specification for the products before installation |
| I.S. EN 14318-1:2013 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION |
| I.S. EN 50434:2014 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PARTICULAR REQUIREMENTS FOR MAINS OPERATED SHREDDERS AND CHIPPERS |
| EN 60335-2-77:2010 | Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| I.S. EN 61481-1:2014 | LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| UNE-EN 13815:2012 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| 16/30325907 DC : 0 | BS EN 15102 - DECORATIVE WALLCOVERINGS - ROLL FORM |
| BS EN 14313 : 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| 15/30301583 DC : 0 | BS EN 16863 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE REFLECTIVE INSULATION PRODUCTS (RI) - SPECIFICATION |
| 17/30353879 DC : 0 | BS EN 17104 - THERMOPLASTICS RIGID PROTECTIVE WALLCOVERING PANELS FOR INTERNAL USE IN BUILDINGS - PERFORMANCE CHARACTERISTICS |
| 13/30273886 DC : 0 | BS EN 16518 - RESILIENT FLOOR COVERINGS - MEASUREMENT OF IN-ROOM IMPACT NOISE |
| CEI EN 50636-2-91 : 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS |
| BS EN 14366:2004 | Laboratory measurement of noise from waste water installations |
| EN 12733:2001+A1:2009 | Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety |
| I.S. EN 15283-2:2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| I.S. EN 12602:2016 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| I.S. EN 60335-2-77:2010 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| DIN EN 13297:2007-12 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| DIN EN 1218-2:2009-10 | Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains (includes Amendment A1:2009) |
| DIN EN 520:2009-12 | Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009) |
| DIN EN 1218-5:2010-02 | Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain (includes Amendment A1:2009) |
| UNE-EN 13964:2016 | Suspended ceilings - Requirements and test methods |
| BS EN 1793-1:2017 | Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics of sound absorption under diffuse sound field conditions |
| BS EN 13986 : 2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 1470:2008 | Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings |
| BS EN 13170 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| BS EN 14915 : 2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 14910 : 2007 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| BS EN 15319:2007 | General principles of design of fibrous (gypsum) plaster works |
| BS EN 13964:2014 | Suspended ceilings. Requirements and test methods |
| EN 13170:2012+A1:2015 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification |
| EN 13169:2012+A1:2015 | Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification |
| EN 13167:2012+A1:2015 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification |
| DIN EN 14474:2005-03 | Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods; German version EN 14474:2004 |
| UNI EN 1218-2 : 2009 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS |
| DIN EN 774:1997-12 | GARDEN EQUIPMENT - HAND-HELD, INTEGRALLY-POWERED HEDGE TRIMMERS - SAFETY |
| EN 50636-2-92:2014 | Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators |
| DIN EN 14915:2013-12 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING |
| NF EN 1218-5 : 2004 + A1 2010 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FED BY CHAIN |
| EN 1793-4:2015 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction |
| EN 13279-1:2008 | Gypsum binders and gypsum plasters - Part 1: Definitions and requirements |
| DIN EN 836 A1 : 1998 | GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY |
| EN 50434:2014 | Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers |
| EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines |
| EN 13165:2012+A2:2016 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification |
| EN 50636-2-91:2014 | Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
| UNE-EN 14915:2013 | Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking |
| UNE-EN 13986:2006+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| UNE-EN 13162:2013+A1:2015 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| ISO 9613-1:1993 | Acoustics Attenuation of sound during propagation outdoors Part 1: Calculation of the absorption of sound by the atmosphere |
| ISO/TR 140-13:1997 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 13: Guidelines |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| EN ISO 266:1997 | Acoustics - Preferred frequencies (ISO 266:1997) |
| ISO 3382:1997 | Acoustics — Measurement of the reverberation time of rooms with reference to other acoustical parameters |
| IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.