EN ISO 3668:2001
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998)
Published date
16-05-2001
Publisher
Superseded date
29-03-2022
Superseded by
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Principle
4 Required supplementary information
5 Illumination for colour matching
6 Observer
7 Test panels and reference standards
8 Procedure for colour comparison
9 Assessment of metamerism
10 Test report
Annex A (normative) Required supplementary information
Annex B (normative) Colour difference rating scheme
Annex C (informative) Metameric matches
Annex ZA (normative) Normative references to international
publications with their relevant European
publications
Deals with the sampling and testing of paints, varnishes and related products. Defines a method for visually comparing the colour of films of paints or related products against a standard (either a reference standard or a freshly prepared standard) using either natural daylight or artificial light sources in a standard booth. Does not apply to coatings containing special-effect pigments, e.g. metallics, without previous agreement on all details of illuminating and viewing conditions.
| Committee |
CEN/TC 139
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN ISO 3668:2001-12 | Identical |
| NBN EN ISO 3668 : 2001 | Identical |
| NF EN ISO 3668 : 2003 | Identical |
| BS EN ISO 3668:2001 | Identical |
| ISO 3688:1999 | Identical |
| I.S. EN ISO 3668:2001 | Identical |
| NS EN ISO 3668 : 1ED 2001 | Identical |
| PN EN ISO 3668 : 2002 | Identical |
| NEN EN ISO 3668 : 2001 | Identical |
| ONORM EN ISO 3668 : 2001 | Identical |
| UNE-EN ISO 3668:2002 | Identical |
| DIN EN 10245-5:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| NF EN 10245-5 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| I.S. EN 12206-1:2004 | PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER |
| I.S. EN 16094:2012 | LAMINATE FLOOR COVERINGS - TEST METHOD FOR THE DETERMINATION OF MICRO-SCRATCH RESISTANCE |
| I.S. CEN TS 15185:2006 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
| BS EN 12206-1:2004 | Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder |
| BS EN 14323:2017 | Wood-based panels. Melamine faced boards for interior uses. Test methods |
| BS EN 12721 : 2009 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT |
| EN 13442:2013 | Wood flooring and wood panelling and cladding - Determination of the resistance to chemical agents |
| EN 12722:2009+A1:2013 | Furniture - Assessment of surface resistance to dry heat |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| CEN/TS 15185:2005 | Furniture - Assessment of the surface resistance to abrasion |
| EN 10245-2:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| EN 12720:2009+A1:2013 | Furniture - Assessment of surface resistance to cold liquids |
| DIN EN 13523-22:2017-05 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| EN 10245-3:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| EN 10245-5:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| EN 13438:2013 | Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| EN 15185:2011 | Furniture - Assessment of the surface resistance to abrasion |
| DIN EN 12722:2014-02 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT |
| BS EN 10245-5:2011 | Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire |
| EN 12206-1:2004 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| DD CEN/TS 15185:2005 | Furniture. Assessment of the surface resistance to abrasion |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| PREN 15185 : DRAFT 2009 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
| EN 16094:2012 | Laminate floor coverings - Test method for the determination of micro-scratch resistance |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| NF EN 12206-1 : 2011 | PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER |
| DIN EN 13523-22:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
| DIN EN 13438:2013-12 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| BS EN 13442:2013 | Wood flooring and wood panelling and cladding. Determination of the resistance to chemical agents |
| BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| I.S. EN 10245-2:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| I.S. EN 14323:2017 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| DIN EN 12206-1:2004-09 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| I.S. EN 12721:2009 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT |
| I.S. EN 13442:2013 | WOOD FLOORING AND WOOD PANELLING AND CLADDING - DETERMINATION OF THE RESISTANCE TO CHEMICAL AGENTS |
| I.S. EN 10245-4:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| I.S. EN 13438:2013 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| I.S. EN 12720:2009 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO COLD LIQUIDS |
| I.S. EN 13523-22:2017 | COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
| I.S. EN 10245-3:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| I.S. EN 12722:2009 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT |
| DIN EN 16094:2012-04 | Laminate floor coverings - Test method for the determination of micro-scratch resistance |
| S.R. CEN/TS 16611:2016 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO MICROSCRATCHING |
| 08/30180847 DC : DRAFT JUNE 2008 | BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| BS EN 15185:2011 | Furniture. Assessment of the surface resistance to abrasion |
| 15/30329707 DC : 0 | BS EN 13523-22 - COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
| PD CEN/TS 16611:2016 | Furniture. Assessment of the surface resistance to microscratching |
| 10/30216947 DC : 0 | BS EN 16094 - LAMINATE FLOOR COVERINGS - TEST METHOD FOR THE DETERMINATION OF MICRO-SCRATCH RESISTANCE |
| 08/30180838 DC : DRAFT JUNE 2008 | BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| I.S. EN 438-2:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| DIN EN 12720:2014-02 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO COLD LIQUIDS |
| DIN EN 12721:2014-02 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT |
| DIN EN 14323:2004-06 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS |
| BS EN 12722 : 2009 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT |
| BS EN 10245-3:2011 | Steel wire and wire products. Organic coatings on steel wire PE coated wire |
| DIN EN 15185:2011-07 | Furniture - Assessment of the surface resistance to abrasion |
| DIN CEN/TS 16611;DIN SPEC 68264:2016-08 | Furniture - Assessment of the surface resistance to microscratching; German version CEN/TS 16611:2016 |
| PREN 13438 : DRAFT 2012 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| 09/30207453 DC : 0 | BS EN 15185 - FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
| BS EN 16094:2012 | Laminate floor coverings. Test method for the determination of micro-scratch resistance |
| PREN 13442 : DRAFT 2011 | WOOD AND PARQUET FLOORING AND WOOD PANELLING AND CLADDING - DETERMINATION OF THE RESISTANCE TO CHEMICAL AGENTS |
| 08/30180844 DC : DRAFT JUNE 2008 | BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| I.S. EN 15185:2011 | FLUESSIGGAS-GERAETE UND AUSRUESTUNGSTEILE - KENNZEICHNUNG VON FLASCHEN UND FAESSERN |
| DIN EN 438-2:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| DIN EN 10245-4:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011 |
| BS EN 13523-22:2017 | Coil coated metals. Test methods Colour difference. Visual comparison |
| BS EN 10245-4:2011 | Steel wire and wire products. Organic coatings on steel wire Polyester coated wire |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| BS EN 13438:2013 | Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN 12721:2009+A1:2013 | Furniture - Assessment of surface resistance to wet heat |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN 10245-4:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| 12/30238456 DC : 0 | BS EN 13438 - PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| 11/30243592 DC : 0 | BS EN 13442 - WOOD AND PARQUET FLOORING AND WOOD PANELLING AND CLADDING - DETERMINATION OF THE RESISTANCE TO CHEMICAL AGENTS |
| 08/30180841 DC : DRAFT JUNE 2008 | BS EN 10245-3 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| I.S. EN 10245-5:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| DIN EN 13442:2013-05 | Wood flooring and wood panelling and cladding - Determination of the resistance to chemical agents |
| BS EN 12720 : 2009 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO COLD LIQUIDS |
| BS EN 10245-2:2011 | Steel wire and wire products. Organic coatings on steel wire PVC finished wire |
| EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| DIN EN 10245-2:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011 |
| CEN/TS 16611:2016 | Furniture - Assessment of the surface resistance to microscratching |
| EN 14323:2017 | Wood-based panels - Melamine faced boards for interior uses - Test methods |
| DIN EN 10245-3:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire; German version EN 10245-3:2011 |
| UNE-EN 10245-5:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| UNE-EN 10245-3:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| UNE-EN 10245-4:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| UNE-EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| UNE-EN 13442:2013 | Wood flooring and wood panelling and cladding - Determination of the resistance to chemical agents |
| UNE-EN 10245-2:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| UNE-EN 12720:2009 | Furniture - Assessment of surface resistance to cold liquids |
| UNE-EN 12722:2009 | Furniture - Assessment of surface resistance to dry heat |
| UNE-EN 12721:2009 | Furniture - Assessment of surface resistance to wet heat |
| UNE-EN 14323:2017 | Wood-based panels - Melamine faced boards for interior uses - Test methods |
| UNE-EN 15185:2011 | Furniture - Assessment of the surface resistance to abrasion |
| UNE-EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties |
| UNE-EN 16094:2012 | Laminate floor coverings - Test method for the determination of micro-scratch resistance |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| EN 23270:1991 | Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (ISO 3270:1984) |
| ISO 7724-1:1984 | Paints and varnishes — Colorimetry — Part 1: Principles |
| ISO 1512:1991 | Paints and varnishes — Sampling of products in liquid or paste form |
| ISO 2808:2007 | Paints and varnishes — Determination of film thickness |
| ISO 7724-2:1984 | Paints and varnishes — Colorimetry — Part 2: Colour measurement |
| EN 21512:1994/AC:1994 | PAINTS AND VARNISHES - SAMPLING OF PRODUCTS IN LIQUID OR PASTE FORM |
| EN ISO 1514:2016 | Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
| EN ISO 1513:2010 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| ISO 7724-3:1984 | Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences |
| ISO 1513:2010 | Paints and varnishes — Examination and preparation of test samples |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.