Skip to content
Please enter a keyword to search

  • BS EN 10245-1:2011

    Current The latest, up-to-date edition.

    Steel wire and wire products. Organic coatings on steel wire General rules

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  30-11-2011

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Requirements and testing methods for the organic
      coating material
    5 Requirements and testing methods for the organic
      coating on wire
    6 Performance tests for the organic coating
    7 Retests
    8 Inspection and Quality assurance
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes the requirements for the characteristics and testing methods for organic coatings made of organic coating material suitable for the application on to steel wire and wire products of circular or other sections.

    General Product Information - (Show below) - (Hide below)

    Committee ISE/106
    Development Note Supersedes 95/701546 DC. (08/2004) Supersedes 08/30180835 DC. (11/2011)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 2811-1:2016 Paints and varnishes — Determination of density — Part 1: Pycnometer method
    ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
    EN 10218-1:2012 Steel wire and wire products - General - Part 1: Test methods
    BS 2782-3:Methods 320A to 320F:1976 Methods of testing plastics. Mechanical properties Tensile strength, elongation and elastic modulus
    EN 10245-2:2011 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
    ISO 6272-2:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter
    EN 10245-4:2011 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
    EN ISO 1183-3 : 1999 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD
    ISO 527-4:1997 Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
    ISO 2809:1976 Paints and varnishes — Determination of light fastness of paints for interior use
    ISO 6270-2:2005 Paints and varnishes Determination of resistance to humidity Part 2: Procedure for exposing test specimens in condensation-water atmospheres
    ISO 1512:1991 Paints and varnishes Sampling of products in liquid or paste form
    EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
    EN ISO 4892-1:2016 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
    ISO 2811-3:2011 Paints and varnishes — Determination of density — Part 3: Oscillation method
    EN ISO 3668:2001 Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998)
    EN ISO 527-4:1997 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
    EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
    ISO 6270-1:1998 Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation
    ISO 2808:2007 Paints and varnishes Determination of film thickness
    EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
    EN 10245-3:2011 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
    EN ISO 2811-2:2011 Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
    ISO 7724-2:1984 Paints and varnishes Colorimetry Part 2: Colour measurement
    ISO 3668:2017 Paints and varnishes — Visual comparison of colour of paints
    EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
    EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
    ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
    EN ISO 2811-1:2016 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
    EN ISO 2811-3:2011 Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011)
    EN 10245-5:2011 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
    EN ISO 6988:1994 Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985)
    ISO 527-5:2009 Plastics Determination of tensile properties Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
    ISO 105-A08:2001 Textiles — Tests for colour fastness — Part A08: Vocabulary used in colour measurement
    ISO 7724-3:1984 Paints and varnishes Colorimetry Part 3: Calculation of colour differences
    EN 10021:2006 General technical delivery conditions for steel products
    ISO 4892-3:2016 Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
    ISO 2811-2:2011 Paints and varnishes Determination of density Part 2: Immersed body (plummet) method
    ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
    ISO 1183-2:2004 Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method
    ISO 1183-3:1999 Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method
    EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009)
    ISO 4582:2017 Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
    EN 10204:2004 Metallic products - Types of inspection documents
    EN ISO 2811-4:2011 Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011)
    ISO 6272-1:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter
    ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
    ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
    ISO 2811-4:2011 Paints and varnishes Determination of density Part 4: Pressure cup method
    EN 50395 : 2005 AMD 1 2011 ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES
    EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
    EN ISO 105-A08:2002 Textiles - Tests for colour fastness - Part A08: Vocabulary used in colour measurement (ISO 105-A08:2001)
    EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
    ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
    EN ISO 527-3:1995/AC:2002 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
    EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
    ISO 6988:1985 Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture
    EN 50396 : 2005 AMD 1 2011 NON ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES
    EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
    ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics
    EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
    EN ISO 2808:2007 Paints and varnishes - Determination of film thickness (ISO 2808:2007)
    ISO 2813:2014 Paints and varnishes — Determination of gloss value at 20°, 60° and 85°
    ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
    ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
    EN ISO 1183-2:2004 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD
    EN ISO 2813:2014 Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective