I.S. EN 1032:2003
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
Hardcopy , PDF
21-01-2009
English
05-09-2003
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Basic standards
5 Description of a family of machines
6 Characterization of vibration
6.1 Direction of vibration
6.2 Location of measurement
6.3 Magnitude of vibration
6.4 Multi-axial vibration measurements
7 Instrumentation requirements
7.1 General
7.2 Mounting of transducers
7.3 Frequency weighting filter
7.4 Integration time
7.5 Sensitivity to environmental influences
7.6 Calibration of the measurement chain
7.7 Errors of measurement
7.8 Instrumentation other than vibration instrumentation
8 Testing and operating conditions of the machinery
8.1 General
8.2 Machine and equipment
8.3 Operating conditions and test tracks
8.4 Operators
8.5 Environmental parameters
9 Measurement procedure and validity
9.1 Measurement procedure
9.2 Validity of tests on artificial test tracks
10 Vibration emission value
10.1 Reported vibration values
10.2 Declaration of vibration emission values
10.3 Verification of vibration emission values
11 Measurement report
Annex A (informative) - Summary of information to be given in the
vibration test code
Annex B (informative) - Frequency weighting curves
Annex C (informative) - Possible sources of errors of measurement
Annex D (informative) - Alternative method for determination of
vibration emission value in seats when a
machine can be fitted with different models
of seats
Annex E (informative) - Procedure for developing a test method for
a specific category of mobile machines using
artificial test track
Annex F (informative) - Procedure for developing a test method for
a specific category of mobile machines using
natural test track
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 2006/42/EC
Bibliography
States the determination of whole-body and hand-arm vibration emissions at operator position(s) during testing of mobile machinery.
DevelopmentNote |
2003 Edition Re-Issued in January 2009 & incorporates AMD 1 2008. (01/2009)
|
DocumentType |
Standard
|
Pages |
34
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Withdrawn
|
Supersedes |
Standards | Relationship |
NEN EN 1032 : 2003 + A1 2009 | Identical |
UNI EN 1032 : 2009 | Identical |
SN EN 1032 : 2003 + A1 2009 | Identical |
NBN EN 1032 : 2003 + A1 2009 | Identical |
BS EN 1032 : 2003 | Identical |
UNE-EN 1032:2004 | Identical |
NF EN 1032 : 2003 + A1 2009 | Identical |
NS EN 1032 : 2003 + A1 2008 | Identical |
DIN EN 1032:2009-02 | Identical |
EN 1032:2003+A1:2008 | Identical |
EN 12096:1997 | Mechanical vibration - Declaration and verification of vibration emission values |
ISO 7096:2000 | Earth-moving machinery Laboratory evaluation of operator seat vibration |
ISO 10326-1:2016 | Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements |
ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
ISO 5008:2002 | Agricultural wheeled tractors and field machinery Measurement of whole-body vibration of the operator |
EN ISO 5349-1:2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
ISO 8041:2005 | Human response to vibration Measuring instrumentation |
EN 13059:2002+A1:2008 | Safety of industrial trucks - Test methods for measuring vibration |
EN 13490:2001+A1:2008 | Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration |
ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
ISO 5007:2003 | Agricultural wheeled tractors — Operator's seat — Laboratory measurement of transmitted vibration |
ISO 5805:1997 | Mechanical vibration and shock — Human exposure — Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.