I.S. EN 14986:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
Hardcopy , PDF
English
01-01-2017
02-05-2024
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for all fans
5 Additional requirements for category 2
6 Category 1 fans for specific use with a gaseous explosive
atmosphere as a conveyed atmosphere (flammable or not)
7 Information for use
Annex A (normative) - Additional requirements for category 1
G fans
Annex B (informative) - Classification of requirements for the
different categories
Annex C (informative) - Checklist for verification of the safety
requirements and/or protective measures
Annex D (informative) - Examples of types of fans showing ignition
minimizing features
Annex E (normative) - List of significant hazards
Annex ZA (informative) - Relationship between this European Standard
and the Essential Requirements of EU Directive 2014/34/EU
Bibliography
Describes the constructional requirements for fans constructed to Group II G (of explosion groups IIA, IIB and hydrogen) categories 1, 2 and 3, and Group II D categories 2 and 3, intended for use in explosive atmospheres.
| DocumentType |
Standard
|
| Pages |
58
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN 14986 : 2017 | Identical |
| NBN EN 14986 : 2007 | Identical |
| NF EN 14986 : 2017 | Identical |
| EN 14986:2017 | Identical |
| DIN EN 14986:2014-04 (Draft) | Identical |
| NS EN 14986 : 2017 | Identical |
| BS EN 14986:2007 | Identical |
| BS EN 14986:2017 | Equivalent |
| ONORM EN 14986 : 2017 | Identical |
| DIN EN 14986:2017-04 | Equivalent |
| DIN EN 14986:2007-05 | Identical |
| UNE-EN 14986:2017 | Identical |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| ISO 5802:2001 | Industrial fans — Performance testing in situ |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| ISO 14694:2003 | Industrial fans — Specifications for balance quality and vibration levels |
| ISO 9563:2015 | Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method |
| EN 60034-1:2010/corrigendum Oct. 2010 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN ISO 80079-36:2016 | Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) |
| EN 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| ISO 1940:1973 | Balance quality of rotating rigid bodies |
| EN 60335-2-80:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
| ISO 11925-2:2010 | Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test |
| CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| EN 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| ISO 13351:2009 | Fans — Dimensions |
| EN ISO 13349:2010 | Fans - Vocabulary and definitions of categories (ISO 13349:2010) |
| ISO 80079-36:2016 | Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres — Basic method and requirements |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 281:2007 | Rolling bearings — Dynamic load ratings and rating life |
| EN ISO 13351:2009 | Fans - Dimensions (ISO 13351:2009) |
| EN ISO 5801:2017 | Fans - Performance testing using standardized airways (ISO 5801:2017) |
| IEC 60167:1964 | Methods of test for the determination of the insulation resistance of solid insulating materials |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ISO 14695:2003 | Industrial fans — Method of measurement of fan vibration |
| EN 1755:2015 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
| ISO 1813:2014 | Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
| ISO 1925:2001 | Mechanical vibration — Balancing — Vocabulary |
| ISO 80079-37:2016 | Explosive atmospheres — Part 37: Non-electrical equipment for explosive atmospheres — Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' |
| EN 13463-2:2004 | Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' |
| ISO 16852:2016 | Flame arresters — Performance requirements, test methods and limits for use |
| ISO 13857:2008 | Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| EN 60079-5:2015 | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| EN 13463-3:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
| ISO 2409:2013 | Paints and varnishes — Cross-cut test |
| TRAC 201 : 1990 | |
| EN ISO 80079-37:2016 | Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016) |
| EN ISO 16852:2016 | Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016) |
| ISO 13349:2010 | Fans — Vocabulary and definitions of categories |
| EN 60079-2:2014/AC:2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.