I.S. EN 15567-1:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
Hardcopy , PDF
English
01-01-2015
13-03-2020
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements
5 Test methods
6 Marking
7 Inspection and maintenance
8 Documents
Annex A (normative) - Minimum information to be included
in an arboreal assessment report
Annex B (normative) - Instructions for the use of the ropes
course
Annex C (informative) - Relevance of ISO 4309:2010
to EN 15567-1 for Ropes Courses
Annex D (informative) - Guidance on risk assessment
Bibliography
Describes the permanent and mobile ropes courses and their components.
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 15567-1 : JUL 2015 | Identical |
| NF EN 15567-1 : 2015 | Identical |
| NEN EN 15567-1 : 2015 | Identical |
| NS EN 15567-1 : 2007 | Identical |
| BS EN 15567-1:2015 | Identical |
| EN 15567-1:2015 | Identical |
| DIN EN 15567-1:2015-08 | Identical |
| EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
| ISO 7010:2011 | Graphical symbols — Safety colours and safety signs — Registered safety signs |
| EN 12277:2015 | Mountaineering equipment - Harnesses - Safety requirements and test methods |
| EN 361:2002 | Personal protective equipment against falls from a height - Full body harnesses |
| EN 14229:2010 | Structural timber - Wood poles for overhead lines |
| EN 335:2013 | Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products |
| EN 351-1:2007 | Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
| EN 13411-5:2003+A1:2008 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| EN 353-2:2002 | Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line |
| EN 13411-2:2001+A1:2008 | Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings |
| EN 358:1999 | Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards |
| EN 354:2010 | Personal fall protection equipment - Lanyards |
| EN 360:2002 | Personal protective equipment against falls from a height - Retractable type fall arresters |
| EN 13411-3:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
| EN 341:2011 | Personal fall protection equipment - Descender devices for rescue |
| EN 355:2002 | Personal protective equipment against falls from a height - Energy absorbers |
| EN 350-2:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
| EN 13411-7:2006+A1:2008 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
| EN 1176-1:2017 | Playground equipment and surfacing - Part 1: General safety requirements and test methods |
| EN 13411-1:2002+A1:2008 | Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
| ISO/IEC 17020:2012 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
| ISO 4309:2010 | Cranes — Wire ropes — Care and maintenance, inspection and discard |
| ISO 22727:2007 | Graphical symbols — Creation and design of public information symbols — Requirements |
| EN 13411-4:2011 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
| EN 13411-6:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
| EN 363:2008 | Personal fall protection equipment - Personal fall protection systems |
| EN 813:2008 | Personal fall protection equipment - Sit harnesses |
| EN 15567-2:2015 | Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements |
| EN 362:2004 | Personal protective equipment against falls from a height - Connectors |
| EN 636:2012+A1:2015 | Plywood - Specifications |
| EN ISO 7010 : 2012 AMD 7 2017 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016) |
| EN ISO/IEC 17020:2012 | Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.