I.S. EN 50144-1:1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS
Hardcopy , PDF
06-06-2003
English
01-01-1998
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Definitions
3 General requirements
4 General conditions for the tests
5 Rating
6 Classification
7 Marking and information for use
8 Protection against electric shock
9 Starting
10 Input and current
11 Heating
12 Leakage current
13 Environmental requirements
13.1 Dust measurement
13.2 Noise measurement
13.3 Vibration measurement
14 Moisture resistance
15 Insulation resistance and electric strength
16 Endurance
17 Abnormal operation
18 Mechanical hazards
19 Mechanical strength
20 Construction
21 Components
22 Internal wiring
23 Supply connection and external flexible cables and
cords
24 Terminals for external conductors
25 Provision for earthing
26 Screws and connections
27 Creepage distances, clearances and distances through
insulation
28 Resistance to heat, fire and tracking
29 Resistance to rusting
30 Radiation
Figures
Annexes
A (void)
B (normative) Electronic circuits
C (normative) Measurement of creepage distances and
clearances
D (informative) Circuit for measuring leakage currents
E (informative) Rules for routine tests
F (normative) Normative references
G (informative) A-deviations
Applicable to hand-held electric motor operated or magnetically driven tools, intended for indoor or outdoor use.
| DevelopmentNote |
Only Corrigendum is active. (02/2006)
|
| DocumentType |
Standard
|
| Pages |
104
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 50144-1 : 2002 | Identical |
| BS EN 50144-1:1999 | Identical |
| UNE-EN 50144-1:2001 | Identical |
| NF EN 50144-1 : 2005 AMD 2 2005 | Identical |
| EN 50144-1 : 98 COR 2005 | Identical |
| SN EN 50144-1 : 1998 AMD 2 2003 | Identical |
| NBN EN 50144-1 : 99 AMD 2 2003 | Identical |
| NEN EN 50144-1 : 1998 AMD 2 2003 | Identical |
| ISO 5349:1986 | Mechanical vibration — Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration |
| IEC 61540:1997+AMD1:1998 CSV | Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) |
| IEC 60127-3:2015 | Miniature fuses - Part 3: Sub-miniature fuse-links |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| IEC 60384-14:2013+AMD1:2016 CSV | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
| EN ISO 1463:2004 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003) |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| ISO 820:1975 | Particle boards Definition and classification |
| EN 1093-3:2006+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| EN 60127-3:2015 | Miniature fuses - Part 3: Sub-miniature fuse-links |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| HD 566 : 200S1 | THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| IEC 61058-1:2016 | Switches for appliances - Part 1: General requirements |
| ENV 28041 : DRAFT 1993 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
| ISO 8041:2005 | Human response to vibration Measuring instrumentation |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| EN 61058-1:2002/A2:2008 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| ISO 630:1995 | Structural steels Plates, wide flats, bars, sections and profiles |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN 60651:1994/A2:2001 | SOUND LEVEL METERS (IEC 60651:1979/A2:2000) |
| EN 60309-2:1999/A2:2012 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 2: DIMENSIONAL INTERCHANGEABILITY REQUIREMENTS FOR PIN AND CONTACT-TUBE ACCESSORIES (IEC 60309-2:1999/A2:2012) |
| IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories |
| IEC 60651:1979+AMD1:1993+AMD2:2000 CSV | Sound level meters |
| ENV 25349 : 1992 | MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT AND THE ASSESSMENT OF HUMAN EXPOSURE TO HAND TRANSMITTED VIBRATION (ISO 5349:1986) |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.