IEC 60651:1979+AMD1:1993+AMD2:2000 CSV

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Sound level meters

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Superseded date: 16-04-2003

Language(s): English - French

Published date: 25-10-2001

Publisher: International Electrotechnical Committee

Table of Contents - (Show below) - (Hide below)

FOREWORD
1 Scope
   1.1 General
   1.2 Types
   1.3 Tolerances
   1.4 Characteristics specified
   1.5 Tests specified
2 Object and general requirements
   2.1 Object
   2.2 Applications
   2.3 Weighting characteristics
   2.4 Optional features
   2.5 Method of use
3 Definitions
4 General characteristics
5 Directional characteristics of the microphone and
   instrument case
6 Frequency
7 Detector and indicator characteristics
8 Sensitivity to various environments
9 Calibration and verification of the basic
   characteristics of the sound level meter
10 Provision for use with auxiliary equipment
11 Rating information and instruction manual
12 Electromagnetic and electrostatic compatibility
   requirements and test procedures
   12.1 Field of application
   12.2 Emission limits
   12.3 Electrostatic discharges
   12.4 Immunity to power- and radio-frequency fields
        and conducted disturbances
   12.5 Test procedures
Appendix A Tests of the overload and detection
           characteristics
Appendix B Diffuse field sensitivity
Appendix C Theoretical response to tone bursts
Appendix D (normative) Equations for design-goal
           frequency weightings
Appendix E (informative) Emission limits
Figures

Abstract - (Show below) - (Hide below)

Deals with sound level meters of four degrees of precision, designated Types 0, 1, 2 and 3. Specifies the following characteristics: directional characteristics, frequency weighting characteristics, time-weighting, detector and indicator characteristics, sensitivity to various environments. Establishes electrical and acoustical tests to verify compliance with characteristics specified and describes the method for absolute sensitivity calibration. This standard supersedes IEC 60123 and IEC 60179.

General Product Information - (Show below) - (Hide below)

Committee	TC 29
Development Note	Supersedes IEC 60123 (03/2001) Also numbered as BS EN 60651. (10/2001)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Electrotechnical Committee
Status	Superseded
Superseded By	IEC 61672-2:2013+AMD1:2017 CSV
Supersedes	IEC 60123:1961 IEC 60179:1973

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NF EN 60651 : 94 AMD 2 2001	Identical
HD 425 : 200S1	Identical
NFS 31 009 : CORRIGENDUM 87	Similar to
NBN EN 146 : 1992	Identical
NBN EN 269 : 1994	Identical
NBN EN 25136 : 1995	Identical
NBN EN 27182 : 1992	Identical
NBN EN 24869-1 : 1995	Identical
NBN EN 12419 : 1999	Identical
NBN EN 12941 : 1998 AMD 2 2009	Identical
NBN C 97 122 : 1983	Identical
NEN EN IEC 60651 : 94 AMD 2 2001	Identical
NEN 10651 : 94 AMD 1 1994	Identical
I.S. EN 60651:1994	Identical
SN EN 60651 : 1994 AMD 2 2001	Identical
CEI EN 60651 : 3ED 2002	Identical
EN 60651:1994/A2:2001	Identical
DIN EN 60651 : 1994 AMD 2 2003	Identical
DIN IEC 60651:1981-12	Identical
UNE 20464:1990	Identical
NFS 31 109 : 1991	Similar to
BS 5969(1981) : 1981	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS 7189:1989	SPECIFICATION FOR SOUND CALIBRATORS
CSA C22.2 No. 601.2.33 : 0	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSIS
02/562586 DC : DRAFT JUN 2002	BS EN 60601-1-8 - MEDICAL ELECTRICAL EQUIPMENT - PART 8-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - ALARM SYSTEMS - REQUIREMENTS, TEST AND GUIDELINES - GENERAL REQUIREMENTS AND GUIDELINES FOR ALARM SYSTEMS IN MEDICAL ELECTRICAL EQUIPMENT AND IN MEDICAL ELECTRICAL SYSTEMS
05/30134086 DC : DRAFT MAY 2005	IEC 61996-2 ED1 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
I.S. EN 1454:1998	PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY
I.S. EN ISO 5840:2009	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
I.S. EN ISO 3382:2000	ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS
02/124462 DC : DRAFT DEC 2002	BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
14/30270462 DC : 0	BS EN ISO 5840-1 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS
ISO 9568:1993	Cinematography Background acoustic noise levels in theatres, review rooms and dubbing rooms
BS EN ISO 5840-2:2015	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES
I.S. EN 1835:2000	RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
NF EN 60601-1-8 : 2007 AMD 11 2018	MEDICAL ELECTRICAL EQUIPMENT - PART 1-8: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: GENERAL REQUIREMENTS, TESTS AND GUIDANCE FOR ALARM SYSTEMS IN MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS
BS EN 50332-1:2013	Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology General method for \'one package equipment\'
AES 20 : 1996(R2007)
ISO 9611:1996	Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Measurement of velocity at the contact points of machinery when resiliently mounted
05/30127351 DC : DRAFT JAN 2005
BS EN 61252 : 1997	ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS
CSA Z168.11 : 0	VACUUM DEVICES USED FOR SUCTION AND DRAINAGE
TBR 038 : 20001	PUBLIC SWITCHED TELEPHONE NETWORK (PSTN) - ATTACHMENT REQUIREMENTS FOR A TERMINAL EQUIPMENT INCORPORATING AN ANALOGUE HANDSET FUNCTION CAPABLE OF SUPPORTING THE JUSTIFIED CASE SERVICE WHEN CONNECTED TO THE ANALOGUE INTERFACE OF THE PSTN IN EUROPE
06/30154548 DC : DRAFT AUG 2006	EN 60601-2-19 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-19: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF BABY INCUBATORS
NF EN 61481 : 2001 AMD 2 2005	LIVE WORKING - PORTABLE PHASE COMPARATORS FOR USE ON VOLTAGES FROM 1 KV TO 36 KV A.C.
SAE J 1470 : 2013 (R2018)	MEASUREMENT OF NOISE EMITTED BY ACCELERATING HIGHWAY VEHICLES
BS ISO 3744 : 1994 AMD 8936	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHOD IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
CEI EN 60045-1 : 1996	STEAM TURBINES - PART 1: SPECIFICATIONS
BS 4196-4(1981) : 1981	SOUND POWER LEVELS OF NOISE SOURCES - ENGINEERING METHODS FOR DETERMINATION OF SOUND POWER LEVELS FOR SOURCES IN FREE FIELD CONDITIONS OVER A REFLECTING PLANE
BS ISO 10494:1993	GAS TURBINES AND GAS TURBINE SETS - MEASUREMENT OF EMITTED AIRBORNE NOISE - ENGINEERING/SURVEY METHOD
07/30166815 DC : 0	BS EN 60068-2-65 AMD1 - ENVIRONMENTAL TESTING - PART 2-65: METHODS OF TEST - TEST FG - VIBRATION, ACOUSTICALLY INDUCED
01/200684 DC : DRAFT FEB 2001
BS PAS 41(2003) : 2003	DIRECTIONAL SOUNDERS - REQUIREMENTS AND TESTS
ANSI S12.36 : 0	SURVEY METHODS FOR THE DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES
BS ISO 362:1998	ACOUSTICS - MEASUREMENT OF NOISE EMITTED BY ACCELERATING ROAD VEHICLES - ENGINEERING METHOD
06/30154556 DC : DRAFT AUG 2006	EN 60601-2-20 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-20: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF TRANSPORT INCUBATORS
UNI ISO 1996-2 : 2010	ACOUSTICS - DESCRIPTION, MEASUREMENT AND ASSESSMENT OF ENVIRONMENTAL NOISE - PART 2: DETERMINATION OF ENVIRONMENTAL NOISE LEVELS
AAMI ID26:2004	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
BS ISO 13475-1:1999	Acoustics. Stationary audible warning devices used outdoors Field measurements for determination of sound emission quantities
ASTM F 1464 : 1993 : R1999	Standard Specification for Oxygen Concentrators for Domiciliary Use
AAMI DF80 : 2003 : R2010	MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR THE SAFETY OF CARDIAC DEFIBRILLATORS [INCLUDING AUTOMATED EXTERNAL DEFIBRILLATORS]
ANSI S12.35 : 0	PRECISION METHODS FOR THE DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES IN ANECHOIC AND HEMI-ANECHOIC ROOMS
01/200972 DC : DRAFT FEB 2001	IEC 61243-1 ED.2 - LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
02/107764 DC : DRAFT DEC 2002	ISO 18652 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - EXTERNAL VIBRATORS FOR CONCRETE
BIS IS/ISO 10079-3 : 1999	MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE
BS EN 61481:2001	LIVE WORKING - PORTABLE PHASE COMPARATORS FOR VOLTAGES OF 1 KV TO 36 KV A.C.
BS ISO 230-5:2000	TEST CODE FOR MACHINE TOOLS - PART 5: DETERMINATION OF THE NOISE EMISSION
CSA Z10079.1 : 2003 : R2013	MEDICAL SUCTION EQUIPMENT - PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 15657-1 : 2009	ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE
BIS IS 7194 : 1994(R2002)	ASSESSMENT OF NOISE EXPOSURE DURING WORK FOR HEARING CONSERVATION PURPOSE
CSA C61400-11 : 2007 : R2012	WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
CEI 22-4 : 1997	STABILIZED POWER SUPPLIES, D.C. OUTPUT - PART 2: RATING AND PERFORMANCE
ISO 4412-2:1991	Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors
ISO 1996-3:1987	Acoustics Description and measurement of environmental noise Part 3: Application to noise limits
I.S. EN 50144-1:1998	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS
EN ISO 10052:2004/A1:2010	ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
I.S. EN 61183:1995	ELECTROACOUSTICS - RANDOM-INCIDENCE AND DIFFUSE-FIELD CALIBRATION OF SOUND LEVEL METERS
ANSI S1.42 : 2001 : R2006	DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS
I.S. EN 60551:1993	DETERMINATION OF TRANSFORMER AND REACTOR SOUND LEVELS
I.S. EN 50332-1:2013	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 1: GENERAL METHOD FOR ONE PACKAGE EQUIPMENT
I.S. EN 15657-1:2009	ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE
ISO 13325:2003	Tyres Coast-by methods for measurement of tyre-to-road sound emission
ANSI S12.43 : 1997 : R2007	METHODS FOR MEASUREMENT OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS
I.S. EN 60945:2002	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
I.S. EN 61248-1:1998	TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 1: GENERIC SPECIFICATION
ANSI S12.18 : 1994	PROCEDURES FOR OUTDOOR MEASUREMENT OF SOUND PRESSURE LEVEL
CEI EN 60244-1 : 2000	METHODS OF MEASUREMENT FOR RADIO TRANSMITTERS - PART 1: GENERAL CHARACTERISTICS FOR BROADCAST TRANSMITTERS
ANSI/ASA S12.53 PART 2 : 1999(R2015)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
CEI EN 60315-7 : 1997	METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 7: METHODS OF MEASUREMENT ON DIGITAL SATELLITE RADIO (DSR) RECEIVERS
ANSI S12.19 : 1996 : R2011	MEASUREMENT OF OCCUPATIONAL NOISE EXPOSURE
NF EN 62006 : 2011	HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS
I.S. EN 61252:1996	ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS
ISO 4869-2:1994	Acoustics Hearing protectors Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn
ASTM F 1464 : 1993 : R2005	Standard Specification for Oxygen Concentrators for Domiciliary Use (Withdrawn 2014)
ISO 8579-1:2002	Acceptance code for gear units Part 1: Test code for airborne sound
I.S. EN ISO 3743-2:2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TESTS ROOMS
CSA C22.2 No. 62368-1 : 2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
DIN EN ISO 10052:2010-10	Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2004 + Amd 1:2010) (includes Amendment A1:2010)
BS EN ISO 8359 : 2009	OXYGEN CONCENTRATORS FOR MEDICAL USE - SAFETY REQUIREMENTS
BS EN ISO 11498:2000	DENTAL HANDPIECES - DENTAL LOW-VOLTAGE ELECTRIC MOTORS
BS EN ISO 11691:1997	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
BS EN ISO 17201-2:2006	Acoustics. Noise from shooting ranges Estimation of muzzle blast and projectile sound by calculation
BS EN ISO 3382:2000	ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS
ISO 11203:1995	Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
BS EN ISO 11957:2009	Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements
BS EN ISO 3743-2:1997	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TESTS ROOMS
I.S. EN ISO 11691:2009	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
EN 60645-2:1997	Audiometers - Part 2: Equipment for speech audiometry
DIN EN ISO 11957:2010-01	Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
EN 61329:1996	Sound system equipment - Methods of measuring and specifying the performance of sounders (electroacoustic transducers for tone production)
NF EN ISO 11691 : 2009	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
EN 61043:1994	Electroacoustics - Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones
DIN EN ISO 11691:2010-01	Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:2009
DIN ISO 230-5:2006-03	Test code for machine tools - Part 5: Determination of the noise emission (ISO 230-5:2000)
DIN EN 791:2010-01	DRILL RIGS - SAFETY
BS 5839-9:2003	FIRE DETECTION AND ALARM SYSTEMS FOR BUILDINGS - PART 9: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE OF EMERGENCY VOICE COMMUNICATION SYSTEMS
DIN EN ISO 4871:2009-11	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 61096:1993/A1:1996	METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS
EN 62121:2001	Methods of measurement for minidisc recorders/players
EN 12094-12:2003	Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices
EN 60945:2002	Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
EN 60315-4:1998	Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions
EN 12505:2000+A1:2009	Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements
EN 61183 : 1994	Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters
BS EN ISO 7235:2009	Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss
EN 50144-2-16:2003	Safety of hand-held electric motor operated tools - Part 2-16: Particular requirements for tackers
I.S. EN ISO 11819-1:2002	ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 1: STATISTICAL PASS-BY METHOD
XP I ETS 300245-7 : 99 XP	INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 7: LOCALLY GENERATED INFORMATION TONES
BS ISO 9902:1993	TEXTILE MACHINERY ACOUSTICS - DETERMINATION OF SOUND PRESSURE LEVELS AND SOUND POWER LEVELS EMITTED BY TEXTILE MACHINES - ENGINEERING AND SURVEY METHODS
01/562316 DC : DRAFT JULY 2001	BS EN ISO 7235 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS
I.S. EN ISO 8359:2009	OXYGEN CONCENTRATORS FOR MEDICAL USE - SAFETY REQUIREMENTS (ISO 8359:1996)
BS 7676-1:1993	ACCEPTANCE CODE FOR GEARS - DETERMINATION OF AIRBORNE SOUND POWER LEVELS EMITTED BY GEAR UNITS
NF EN 61063 : 2003	ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY STEAM TURBINES AND DRIVEN MACHINERY
ISO 7188:1994	Acoustics Measurement of noise emitted by passenger cars under conditions representative of urban driving
I.S. EN ISO 7785-1:1999	DENTAL HANDPIECES - PART 1: HIGH-SPEED AIR TURBINE HANDPIECES
I.S. EN ISO 11498:1999	DENTAL HANDPIECES - DENTAL LOW-VOLTAGE ELECTRICAL MOTORS
XP I ETS 300245-5 : 99 XP	INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 5: WIDEBAND (7 KHZ) HANDSET TELEPHONY
I.S. EN 270:1995	RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HOOD - REQUIREMENTS, TESTING, MARKING
BS EN 60244-1:2000	METHODS OF MEASUREMENT FOR RADIO TRANSMITTERS - PART 1: GENERAL CHARACTERISTICS FOR BROADCAST TRANSMITTERS
CEI EN 61043 : 1998	ELECTROACOUSTICS - INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY - MEASUREMENTS WITH PAIRS OF PRESSURE SENSING MICROPHONES
04/30118161 DC : DRAFT AUG 2004	ISO 22472 - SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR THE INSTALLATION AND OPERATION OF VOYAGE DATA RECORDER (VDR)
SAE J ISO 9533 : FEB 2003	EARTH-MOVING MACHINERY - MACHINE-MOUNTED FORWARD AND REVERSE AUDIBLE WARNING ALARM - SOUND TEST METHOD
SAE J 184 : 2014	QUALIFYING A SOUND DATA ACQUISITION SYSTEM
BS 6086:1981	METHOD OF MEASUREMENT OF NOISE INSIDE MOTOR VEHICLES
95/541995 DC : DRAFT AUG 1995	PREN ISO 12239 - SPECIFICATION FOR FIRE PROTECTION EQUIPMENT - SELF-CONTAINED SMOKE ALARMS
ANSI S12.19 : 1996 : R2006	MEASUREMENT OF OCCUPATIONAL NOISE EXPOSURE
BS ISO 11819-1 : 97 AMD 13621	ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 1 - STATISTICAL PASS-BY METHOD
SAE J ISO 6396 : FEB 2003	ACOUSTICS - MEASUREMENT AT THE OPERATORS POSITION OF NOISE EMITTED BY EARTH-MOVING MACHINERY - DYNAMIC TEST CONDITIONS
BS ISO 3743-1 : 1994 AMD 8937	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - COMPARISON METHOD FOR HARD WALLED TEST ROOMS
06/19982093 DC : DRAFT AUG 2006
ISO 18738:2003	Lifts (elevators) - Measurement of lift ride quality
CSA ISO 1996-2 : 2005	ACOUSTICS - DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL NOISE - PART 2: ACQUISITION OF DATA PERTINENT TO LAND USE
DIN ISO 13472-1:2004-04	Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method (ISO 13472-1:2002)
NF ISO 18738 : 2003	LIFTS (ELEVATORS) - MEASUREMENT OF LIFT RIDE QUALITY
BS EN 60315-4:1998	METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 4: RECEIVERS FOR FREQUENCY-MODULATED SOUND BROADCASTING EMISSIONS
BS 6415:1983	SPECIFICATION FOR AUDIO FREQUENCY CALIBRATION TAPE FOR TRANSVERSE TRACK VIDEO RECORDERS
BS 5108-1(1991) : AMD 7552	SOUND ATTENUATION OF HEARING PROTECTORS - SUBJECTIVE METHOD OF MEASUREMENT
BS 4727-3:GRP08(1985) : 1985	GLOSSARY OF ELECTROTECHNICAL POWER TELECOMMUNICATION ELECTRONICS LIGHTING & COLOUR TERMS - TERMS PARTICULAR TO TELECOMMUNICATIONS & ELECTRONICS - ACOUSTICS & ELECTROACOUSTICS TERMINOLOGY
BS EN 61209:1999
BS EN 61606:1997	AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC METHODS OF MEASUREMENT OF AUDIO CHARACTERISTICS
03/103026 DC : DRAFT JAN 2003	BS EN ISO 5840 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
08/30175518 DC : DRAFT SEP 2008	BS EN 13141-2 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES
03/303496 DC : DRAFT MAR 2003	IEC 62252 ED. 1 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - RADAR FOR CRAFT NOT IN COMPLIANCE WITH IMO SOLAS - CHAPTER 5: PERFORMANCE REQUIREMENTS METHODS OF TEST AND REQUIRED TEST RESULTS
AAMI ISO 5840 : 2005 : R2010	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
I.S. EN 61481:2001	LIVE WORKING - PORTABLE PHASE COMPARATORS FOR VOLTAGES OF 1 KV TO 36 KV A.C.
AAMI ISO 5840 :2005	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
PD EN 14035-12:2003	FIREWORKS - PART 12: FLASH BANGERS AND FLASH BANGER BATTERIES - SPECIFICATION AND TEST METHODS
ANSI S12.10 : 2002 : R2007	ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
CSA C61400-11 : 2007	WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
BS EN 61204:1995	Low-voltage power supply devices, d.c. output. Performance characteristics and safety requirements
TS 126 132 : 13.2.0	UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; SPEECH AND VIDEO TELEPHONY TERMINAL ACOUSTIC TEST SPECIFICATION (3GPP TS 26.132 VERSION 14.1.0 RELEASE 14)
I.S. EN 60244-1:2000	METHODS OF MEASUREMENT FOR RADIO TRANSMITTERS - PART 1: GENERAL CHARACTERISTICS FOR BROADCAST TRANSMITTERS
CEI EN 60945 : 2003	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
BS EN 50144-1:1999	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS
AAMI ISO 10079-1 : 1999	MEDICAL SUCTION EQUIPMENT - PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 50144-2-13:2002	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-13: PARTICULAR REQUIREMENTS FOR CHAIN SAWS
ANSI S12.44 : 1997 : R2012	METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL
ANSI/ASA S12.15 : 1992(R2016)	FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED
BS EN ISO 10637:2000	DENTAL EQUIPMENT - HIGH- AND MEDIUM-VOLUME SUCTION SYSTEMS
BS EN 60268-5 : 2003	SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
I.S. EN ISO 5840-1:2015	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS (ISO 5840-1:2015)
I.S. EN ISO 10052:2005	ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
ISO 230-5:2000	Test code for machine tools Part 5: Determination of the noise emission
I.S. EN 60268-5:2003	SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
EG 202 518 : 1.4.1	SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); ACOUSTIC OUTPUT OF TERMINAL EQUIPMENT; MAXIMUM LEVELS AND TEST METHODOLOGY FOR VARIOUS APPLICATIONS
ANSI S12.62 : 2012(R2017)	ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION
I.S. EN 61029-1:2009	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
NF EN 61400-11 : 2004 AMD 1 2006	WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
SAE J ISO 6395 : FEB 2003	ACOUSTICS - MEASUREMENT OF EXTERIOR NOISE EMITTED BY EARTH-MOVING MACHINERY - DYNAMIC TEST CONDITIONS
NF EN 14035-4 : 2003	FIREWORKS - PART 4: BANGER AND BANGER BATTERIES - SPECIFICATION AND TEST METHODS
ETS 300 176-2 : 20002	DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT) - APPROVAL TEST SPECIFICATION - SPEECH
SAE J ISO 7216 : FEB 2003	ACOUSTICS - AGRICULTURAL AND FORESTRY WHEELED TRACTORS AND SELF-PROPELLED MACHINES - MEASUREMENT OF NOISE EMITTED WHEN IN MOTION
I.S. EN ISO 9612:2009	ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD
BS 6402(1983) : 1983	SPECIFICATION FOR PERSONAL SOUND EXPOSURE METERS
NF EN ISO 3743-2 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
EN 61260:1995/A1:2001	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS
IEC 60045-1:1991	Steam turbines - Part 1: Specifications
I.S. EN 60094-3:1999	MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 3: METHODS OF MEASURING THE CHARACTERISTICS OF RECORDING AND REPRODUCING EQUIPMENT FOR SOUND ON MAGNETIC TAPE
DIN EN ISO 5840-2 E : 2016	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015)
BS EN ISO 140-6:1998	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS
ISO 4871:1996	Acoustics Declaration and verification of noise emission values of machinery and equipment
ISO 5136:2003	Acoustics Determination of sound power radiated into a duct by fans and other air-moving devices In-duct method
BS EN ISO 13294:1997	DENTAL HANDPIECES - DENTAL AIR-MOTORS
IEC 60645-2:1993	Audiometers - Part 2: Equipment for speech audiometry
BS EN ISO 11546-1:1996	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
ISO 11689:1996	Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment
IEC 61260:1995	Electroacoustics - Octave-band and fractional-octave-band filters
17/30354643 DC : 0	BS EN 62933-2-1 - ELECTRIC ENERGY STORAGE (ESS) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
I.S. EN ISO 11957:2009	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCE OF CABINS - LABORATORY AND IN SITU MEASUREMENTS
EN ISO 5840-2:2015	Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015)
I.S. EN ISO 5136:2009	ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
I.S. EN ISO 7235:2009	ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS
UNI EN ISO 11691 : 2009	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
I.S. EN 12505:2000	FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
EN ISO 11690-1 : 1996	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - NOISE CONTROL STRATEGIES
EN ISO 5840-1:2015	Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015)
I.S. EN ISO 11546-1:2009	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
I.S. EN ISO 11546-2:2009	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
DIN EN ISO 17201-2:2006-10	ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 2: ESTIMATION OF MUZZLE BLAST AND PROJECTILE SOUND BY CALCULATION
I.S. EN ISO 15744:2008	HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2)
I.S. EN ISO 9614-3:2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
EN ISO 11691:2009	Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)
I.S. EN ISO 4869-4:2000	ACOUSTICS - HEARING PROTECTORS - PART 4 - MEASUREMENT OF EFFECTIVE SOUND PRESSURE LEVELS FOR LEVEL-DEPENDENT SOUND-RESTORATION EAR-MUFFS
DIN EN 15657-1:2009-10	ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE
I.S. EN ISO 4871:2009	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
DIN EN ISO 8359:2009-08	OXYGEN CONCENTRATORS FOR MEDICAL USE - SAFETY REQUIREMENTS
DIN EN ISO 7235:2010-01	Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
UNI EN ISO 11689 : 1998	ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT
UNI EN ISO 15744 : 2008	HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2)
VDE 0682-412 : 2001 AMD 1 2003	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
DIN EN 61243-2 : 2001 AMD 2 2003	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
BS 4196-1:1991	SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR DETERMINATION OF SOUND POWER LEVELS FOR BROADBAND SOURCES IN REVERBERATION ROOMS
BS 4196-2:1991	SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR DETERMINATION OF SOUND POWER LEVELS FOR DISCRETE-FREQUENCY AND NARROW-BAND SOURCES IN REVERBERATION ROOMS
VDE 0557-1 : 2001	LOW-VOLTAGE POWER SUPPLY DEVICES, DC OUTPUT - PERFORMANCE CHARACTERISTICS AND SAFETY REQUIREMENTS
VDE 0559-4 : 1988	POWER CONVERTERS FOR ROLLING STOCK - DIRECT D.C. CONVERTERS (D.C. CHOPPER CONVERTERS)
VDI 3743-1 : 2003	CHARACTERISTIC NOISE EMISSION VALUES OF TECHNICAL SOUND SOURCES - PUMPS - CENTRIFUGAL PUMPS
VDI 2566-2 : 2004	ACOUSTICAL DESIGN FOR LIFT SYSTEMS WITHOUT MACHINE ROOM
BS 848-6(2003) : 2003	FANS FOR GENERAL PURPOSES - METHOD OF MEASUREMENT OF FAN VIBRATION
BS 6840-13:1998	Sound system equipment Listening tests on loudspeakers
BS 6840-4:1997	SOUND SYSTEM EQUIPMENT - MICROPHONES
UNE-EN ISO 5840-2:2016	Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015)
CSA Z107.55 : 1986	RECOMMENDED PRACTICE FOR THE PREDICTION OF SOUND LEVELS RECEIVED AT A DISTANCE FROM AN INDUSTRIAL PLANT
DIN 45641:1990-06	AVERAGING OF SOUND LEVELS
IEC TR 60268-13:1998	Sound system equipment - Part 13: Listening tests on loudspeakers
NF ETS 300807 : 2001	INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - AUDIO CHARACTERISTICS OF TERMINALS DESIGNED TO SUPPORT CONFERENCE SERVICES IN THE ISDN
DIN EN ISO 9612 E : 2009	ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD
BS EN 15657-1:2009	ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE
13/30289577 DC : 0	IEC 62777 - QUALITY EVALUATION METHOD FOR THE SOUND FIELD OF DIRECTIONAL LOUDSPEAKER ARRAY SYSTEM
I.S. EN ISO 140-12:2000	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR
07/30151731 DC : 0	BS IEC 80601-2-35 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF BLANKETS, PADS AND MATTRESSES, INTENDED FOR HEATING IN MEDICAL USE
BS ISO 9568:1993	CINEMATOGRAPHY - BACKGROUND ACOUSTIC NOISE LEVELS IN THEATRES, REVIEW ROOMS AND DUBBING ROOMS
XP I ETS 300245-6 : 99 XP	INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 6: WIDEBAND (7 KHZ), LOUDSPEAKING AND HANDS FREE TELEPHONY
09/30182105 DC : 0	BS EN 60349-2 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
BS EN ISO 9612:2009	Acoustics. Determination of occupational noise exposure. Engineering method
IEC 62006:2010	Hydraulic machines - Acceptance tests of small hydroelectric installations
BS EN 60645-2:1997	AUDIOMETERS - PART 2: EQUIPMENT FOR SPEECH AUDIOMETRY
ISO 10847:1997	Acoustics In-situ determination of insertion loss of outdoor noise barriers of all types
CSA C22.2 No. 601.2.21 : 1998	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFANT RADIANT WARMERS
DIN EN 12733:2016-08 (Draft)	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
ANSI S12.53/2 : 1999	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
CSA Z107.53 : 0	PROCEDURE FOR PERFORMING A SURVEY OF SOUND DUE TO INDUSTRIAL, INSTITUTIONAL, OR COMMERCIAL ACTIVITIES
I.S. EN 61243-2:1999	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
UNE-EN 62006:2011	Hydraulic machines - Acceptance tests of small hydroelectric installations
BS ISO 6798:1995	RECIPROCATING INTERNAL COMBUSTION ENGINES - MEASUREMENT OF EMITTED AIRBORNE NOISE - ENGINEERING METHOD AND SURVEY METHOD
BS 5724-2.30(1993) : 1993	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR CAPNOMETERS FOR USE WITH HUMANS
BS EN 61007:1997	TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - MEASURING METHODS AND TEST PROCEDURES
13/30281662 DC : 0	BS EN 50332-1 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT"
ISO 9918:1993	Capnometers for use with humans Requirements
07/30137110 DC : 0	ISO 9612 - ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD
BS 7458-2:1991	TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINERY - SURVEY METHOD
DIN 58648-4:1991-11	RESPIRATORY EQUIPMENT; COMPRESSED AIR LINE BREATHING APPARATUS IN LIGHT DUTY CONSTRUCTION (LIGHT DUTY COMPRESSED AIR LINE BREATHING APPARATUS); SAFETY REQUIREMENTS, TESTING, MARKING
BS EN 61996:2001	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
AAMI ISO 10079-3 : 1999	MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE
01/560291 DC : DRAFT JAN 2001	BS EN ISO 17510-2 SLEEP APNOEA BREATHING THERAPY - PART 2: MASKS AND APPLICATION ACCESSORIES
ES 203 038 : 1.2.1	SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); REQUIREMENTS AND TESTS METHODS FOR TERMINAL EQUIPMENT INCORPORATING A HANDSET WHEN CONNECTED TO THE ANALOGUE INTERFACE OF THE PSTN
BS EN ISO 5840-1:2015	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS
BS 7458-1:1991	TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINERY - ENGINEERING METHOD FOR FREE-FIELD CONDITIONS OVER A REFLECTING PLANE
CSA Z10079.3 : 2003 : R2013	MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE
CSA M5131 : 1997	ACOUSTICS - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - MEASUREMENT OF NOISE AT THE OPERATOR'S POSITION - SURVEY METHOD
PREN 50332-1 : DRAFT 2013	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT"
03/113341 DC : DRAFT SEP 2003	BS EN ISO 140-11 - ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 11: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT SOUND BY FLOOR COVERINGS ON LIGHTWEIGHT REFERENCE FLOORS
BS 5724-2.119(1991) : 1991	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR BABY INCUBATORS
NF EN 61029-1 : 2009 AMD 11 2011	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
BS EN 61237-4:1998	BROADCAST VIDEO TAPE RECORDERS - METHODS OF MEASUREMENT - PART 4: ANALOGUE AUDIO PERFORMANCE MEASUREMENTS
ISO 13475-1:1999	Acoustics — Stationary audible warning devices used outdoors — Part 1: Field measurements for determination of sound emission quantities
AAMI DF80:2003	MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR THE SAFETY OF CARDIAC DEFIBRILLATORS [INCLUDING AUTOMATED EXTERNAL DEFIBRILLATORS]
AAMI ID26 : 2004 : R2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
BS ISO 4869-2 : 1994 AMD 8935	ACOUSTICS - HEARING PROTECTORS - ESTIMATION OF EFFECTIVE A-WEIGHTED SOUND PRESSURE LEVELS WHEN HEARING PROTECTORS ARE WORN
BS EN 61243-5:2001	Live working. Voltage detectors Voltage detecting systems (VDS)
BS 4196-3(1981) : LATEST	SOUND POWER LEVELS OF NOISE SOURCES - ENGINEERING METHODS FOR DETERMINATION OF SOUND POWER LEVELS FOR SOURCES IN SPECIAL REVERBERATION TEST ROOMS
UNE-EN ISO 5840-1:2016	Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015)
DIN EN ISO 5840-2:2016-05	Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015)
DIN EN ISO 5840-1:2015-12	Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015)
BS 6812-2:1987	AIRBORNE NOISE EMITTED BY EARTH MOVING MACHINERY - METHOD OF MEASUREMENT AT THE OPERATOR'S POSITION IN A STATIONARY TEST CONDITION
I.S. EN ISO 5840-2:2015	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015)
NF EN 14035-12 : 2003	FIREWORKS - PART 12: FLASH BANGERS AND FLASH BANGER BATTERIES - SPECIFICATION AND TEST METHODS
I.S. EN ISO 10637:2000	DENTAL EQUIPMENT - HIGH- AND MEDIUM-VOLUME SUCTION SYSTEMS
NF ISO 14695 : 2003	INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION
AAMI ISO 5840-1 : 2016	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS
I.S. EN 27574-1:1991	ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - GENERAL CONSIDERATIONS AND DEFINITIONS
ISO 3742:1988	Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms
I.S. EN 60315-7:1998	METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 7: METHODS OF MEASUREMENT ON DIGITAL SATELLITE RADIO (DSR) RECEIVERS
I.S. EN 27785-1:1994	DENTAL HANDPIECES - PART 1: HIGH SPEED AIR TURBINE HANDPIECES
BS 6812-1:1987	AIRBORNE NOISE EMITTED BY EARTH MOVING MACHINERY - METHOD OF MEASUREMENT OF EXTERIOR NOISE IN A STATIONARY TEST CONDITION
UNI EN 12733 : 2009	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
ANSI S12.15 : 1992 : R2007	FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED
UNI ISO 9533 : 2008	EARTH-MOVING MACHINERY - MACHINE-MOUNTED FORWARD AND REVERSE AUDIBLE WARNING ALARM - SOUND TEST METHOD
BS 7445-1:1991	DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL NOISE - GUIDE TO QUANTITIES AND PROCEDURES
SAE J 2103 : JUN 2003	ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY EARTHMOVING MACHINERY - OPERATOR'S POSITION - STATIONARY TESTING CONDITION
IEC 60244-1:1999	Methods of measurement for radio transmitters - Part 1: General characteristics for broadcast transmitters
CSA C22.2 No. 601.2.19 : 1992	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF BABY INCUBATORS
ANSI S12.34 : 0	ENGINEERING METHODS FOR THE DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES FOR ESSENTIALLY FREE-FIELD CONDITIONS OVER A REFLECTING PLANE
ASTM F 1690 : 1996 : R2004	Standard Specification for Humidifiers for Medical Use—Part 1: General Requirements for Active Humidification Systems (Withdrawn 2013)
CSA ISO 1996-3 : 2005	ACOUSTICS - DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL NOISE - PART 3: APPLICATION TO NOISE LIMITS
EN 62006:2011	Hydraulic machines - Acceptance tests of small hydroelectric installations
UNI EN ISO 10052 : 2010	ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
I.S. HD 483.5 S2:1995	SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
I.S. EN 61204:1996	LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS
DIN EN 12505:2010-11	Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN ISO 11064-6 E : 2005	ERGONOMIC DESIGN OF CONTROL CENTRES - PART 6: ENVIRONMENTAL REQUIREMENTS FOR CONTROL CENTRES
ISO 140-4:1998	Acoustics Measurement of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between rooms
BS EN 1835:2000	RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
BS EN ISO 15606:2000	DENTAL HANDPIECES - AIR-POWERED SCALERS AND SCALER TIPS
BS EN ISO 11819-1:2001	Acoustics. Measurement of the influence of road surfaces on traffic noise Statistical pass-by method
IEC 61329:1995	Sound system equipment - Methods of measuring and specifying the performance of sounders (electroacoustic transducers for tone production)
ISO 9612:2009	Acoustics Determination of occupational noise exposure Engineering method
UNE-EN ISO 11203:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
ISO 7574-1:1985	Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 1: General considerations and definitions
ISO 7785-2:1995	Dental handpieces Part 2: Straight and geared angle handpieces
ISO 5840:2005	Cardiovascular implants Cardiac valve prostheses
BS EN ISO 14257:2001	Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance
UNE-EN ISO 5136:2010	Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
ISO 17201-2:2006	Acoustics Noise from shooting ranges Part 2: Estimation of muzzle blast and projectile sound by calculation
ISO 8297:1994	Acoustics Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment Engineering method
IEC 61183:1994	Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters
BS EN 12505 : 2000	FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
ISO/TR 4869-4:1998	Acoustics Hearing protectors Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs
ANSI S12.44 : 1997(R2020)	METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL
EN ISO 11203:2009	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
UNI EN ISO 11203 : 2009	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
I.S. EN ISO 11203:2009	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
OPEI B175.4 : 2013	OUTDOOR POWER EQUIPMENT - PORTABLE, HANDHELD, INTERNAL COMBUSTION ENGINE-POWERED CUT-OFF MACHINES - SAFETY AND ENVIRONMENTAL REQUIREMENTS
EN 269:1994	Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking
UNI EN ISO 3743-2 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
UNI EN ISO 5840 : 2009	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
UNI EN 791 : 2009	DRILL RIGS - SAFETY
UNI EN ISO 9614-3 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
UNI EN ISO 11957 : 2009	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCE OF CABINS - LABORATORY AND IN SITU MEASUREMENTS
UNI EN ISO 4871 : 2009	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
UNI EN ISO 7235 : 2009	ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR- TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS
UNI EN ISO 5136 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
UNI EN ISO 8359 : 2012	OXYGEN CONCENTRATORS FOR MEDICAL USE - SAFETY REQUIREMENTS
UNI EN ISO 11546-1 : 2009	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
UNI EN ISO 11546-2 : 2009	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
UNI EN 12505 : 2010	FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
CEI EN 61243-5 : 2002	LIVE WORKING - VOLTAGE DETECTORS - PART 5: VOLTAGE DETECTING SYSTEMS (VDS)
UNI ISO 9613-2 : 2006	ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION
BS EN 50144-2-16:2003	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-16: PARTICULAR REQUIREMENTS FOR TACKERS
BS 5724-2.120(1991) : 1991	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR TRANSPORT INCUBATORS
99/561983 DC : APR 99	ISO/DIS 14257 - ACOUSTICS - MEASUREMENT AND MODELLING OF SPATIAL SOUND DISTRIBUTION CURVES IN WORKROOMS FOR EVALUATION OF THEIR ACOUSTICAL PERFORMANCE
98/715898 DC : DRAFT OCT 1998	ISO/CD 8579-1 - ACCEPTANCE CODE FOR GEAR UNITS - PART 1: TEST CODE FOR AIRBORNE SOUND
TR 101 380 : 1.1.1	DIGITAL TERMINALS AND ACCESS (DTA) - DEFINITIONS, ABBREVIATIONS AND SYMBOLS
BS 7077-1.1(1993) : AMD 8364	DENTAL HANDPIECES AND ACCESSORIES - HANDPIECES - SPECIFICATION FOR HIGH SPEED AIR TURBINE HANDPIECES
99/710387 DC : DRAFT JUN 99	EN ISO 15744 - HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2)
BS 6288-5(1989) : 1989 AMD 8126	MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - SPECIFICATION FOR ELECTRICAL MAGNETIC TAPE PROPERTIES
BS EN 60804:2001	Integrating-averaging sound level meters
I.S. EN ISO 7785-2:1998	DENTAL HANDPIECES - PART 2: STRAIGHT AND GEARED ANGLE HANDPIECES
DIN 45640-1 : 1990	NOISE EMITTED BY VESSELS ON INLAND WATER-WAYS AND HARBOURS; METHOD FOR THE DETERMINATION OF THE MAXIMUM SOUND PRESSURE LEVEL
BS ISO 8297:1994	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF MULTISOURCE INDUSTRIAL PLANTS FOR EVALUATION OF SOUND PRESSURE LEVELS IN THE ENVIRONMENT - ENGINEERING METHOD
ISO 9902:1993	Textile machinery acoustics Determination of sound pressure levels and sound power levels emitted by textile machines Engineering and survey methods
03/113375 DC : DRAFT AUG 2003	BS EN ISO 22374 - DENTISTRY - DENTAL HANDPIECES - ELECTRICAL-POWERED SCALERS AND SCALER TIPS
BS 7422(1991) : 1991 AMD 10092	SPECIFICATION FOR FILTERS FOR THE MEASUREMENT OF AUDIBLE SOUND IN THE PRESENCE OF ULTRASOUND
ISO 9921-1:1996	Ergonomic assessment of speech communication Part 1: Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method)
05/30134824 DC : 0	EN 50447 - ACTIVE IMPLANTABLE MEDICAL DEVICES - PARTICULAR REQUIREMENTS FOR HEART-LUNG MACHINES (HLM)
ISO/TR 7849:1987	Acoustics Estimation of airborne noise emitted by machinery using vibration measurement
BS ISO 11498 : 1997 AMD 10705	DENTAL HANDPIECES - DENTAL LOW-VOLTAGE ELECTRIC MOTORS
03/303500 DC : DRAFT FEB 2003	ISO 6969 - ROAD VEHICLES - SOUND SIGNALLING DEVICES - TESTS AFTER MOUNTING ON VEHICLE
BS ISO 3743-2 : 1994 AMD 9426	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - METHODS FOR SPECIAL REVERBERATION TEST ROOMS
DIN ISO 5128:1984-11	ACOUSTICS - MEASUREMENT OF NOISE INSIDE MOTOR VEHICLES
BS 5724-2.121(1995) : 1995	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR INFANT RADIANT WARMERS
07/30164508 DC : 0	IEC 60601-2-21 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-21: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT RADIANT WARMERS
XP I ETS 300245-8 : 99 XP	INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 8: SPEECH TRANSMISSION CHARACTERISTIC WHEN USING LOW-DELAY CODE-EXCITED LINEAR PREDICTION (LD-CELP) CODING AT 16 KBIT/S
BS ISO 9921-1:1996	ERGONOMIC ASSESSMENT OF SPEECH COMMUNICATION - SPEECH INTERFERENCE LEVEL AND COMMUNICATION DISTANCES FOR PERSONS WITH NORMAL HEARING CAPACITY IN DIRECT COMMUNICATION (SIL METHOD)
BS EN 61248-1:1997	TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 27917:1992	ACOUSTICS - MEASUREMENT AT THE OPERATOR'S POSITION OF AIRBORNE NOISE EMITTED BY BRUSH SAWS
CSA Z10079.3 : 2003	MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE
CEI EN 61012 : 1999	FILTERS FOR THE MEASUREMENT OF AUDIBLE SOUND IN THE PRESENCE OF ULTRASOUND
CEI EN 61329 : 1998	SOUND SYSTEM EQUIPMENT METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE OF SOUNDERS (ELECTROACOUSTIC TRANSDUCERS FOR TONE PRODUCTION)
BS EN 12733 : 2001	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
BS EN 62121:2001	METHODS OF MEASUREMENT FOR MINIDISC RECORDERS/PLAYERS
TBR 008 : 20002	INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TELEPHONY 3,1 kHz TELESERVICE - ATTACHMENT REQUIREMENTS FOR HANDSET TERMINALS
BS ISO 13472-1:2002	Acoustics. Measurement of sound absorption properties of road surfaces in situ Extended surface method
07/30168572 DC : 0	BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
BS EN 61029-1 : 2009	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
01/564696 DC : DRAFT NOV 2001	BS ISO 7731 - ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS
ISO 8194:1987	Radiation protection Clothing for protection against radioactive contamination Design, selection, testing and use
02/565107 DC : DRAFT DEC 2002	BS EN 14594 - RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING
BS 7721(1994) : 1994 AMD 14748	GAS TURBINES AND GAS TURBINE SETS - MEASUREMENT OF EMITTED AIRBORNE NOISE - ENGINEERING/SURVEY METHOD
I-ETS 300 245-6 : JAN 96	INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - WIDEBAND (7KHZ), LOUDSPEAKING AND HANDS FREE TELEPHONY
UNI ISO 230-5 : 2010	TEST CODE FOR MACHINE TOOLS - PART 5: DETERMINATION OF THE NOISE EMISSION
BS EN 61260:1996	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS
BS EN 61243-2:1998	Live working. Voltage detectors Resistive type to be used for voltages of 1 kV to 36 kV a.c.
CSA Z10079.3:2003	MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE
BS ISO 14695:2003	INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION
ANSI S12.10 : 2002	ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
ISO 140-8:1997	Acoustics Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
CSA Z10079.1 : 2003	MEDICAL SUCTION EQUIPMENT - PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT - SAFETY REQUIREMENTS
CSA Z9918 : 0	CAPNOMETERS FOR USE WITH HUMANS - REQUIREMENTS
CEI EN 62006 : 2011	HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS
ICAO 7300 ANNEX 16 VOL.1 : 2011	ANNEX 16 TO THE CONVENTION ON INTERNATIONAL CIVIL AVIATION (ICAO 7300) - ENVIRONMENTAL PROTECTION - VOLUME 1: AIRCRAFT NOISE
ISO 1680-2:1986	Acoustics Test code for the measurement of airborne noise emitted by rotating electrical machinery Part 2: Survey method
ISO 7196:1995	Acoustics — Frequency-weighting characteristic for infrasound measurements
NF ETS 300 082 : 1995	INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - 3,1 KHZ TELEPHONY TELESERVICE - END-TO-END COMPATIBILITY REQUIREMENTS FOR TELEPHONY TERMINALS
SAE J ISO 6393 : FEB 2003	ACOUSTICS - MEASUREMENT OF EXTERIOR NOISE EMITTED BY EARTH-MOVING MACHINERY - STATIONARY TEST CONDITIONS
ISO 6242-3:1992	Building construction Expression of users' requirements Part 3: Acoustical requirements
I.S. EN ISO 4869-2:1996	ACOUSTICS - HEARING PROTECTORS - PART 2: ESTIMATION OF EFFECTIVE A-WEIGHTED SOUND PRESSURE LEVELS WHEN HEARING PROTECTORS ARE WORN
BS EN ISO 4869-2:1995	ACOUSTICS - HEARING PROTECTORS - PART 2: ESTIMATION OF EFFECTIVE A-WEIGHTED SOUND PRESSURE LEVELS WHEN HEARING PROTECTORS ARE WORN
ISO 362:1998	Acoustics Measurement of noise emitted by accelerating road vehicles Engineering method
ANSI S1.4 : 1983	SPECIFICATION FOR SOUND LEVEL METERS
NF EN ISO 10637 : 2001	DENTAL EQUIPMENT - HIGH- AND MEDIUM-VOLUME SUCTION SYSTEMS
ANSI/ASA S12.44 : 1997(R2017)	METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL
I.S. EN 146:1992	RESPIRATORY PROTECTIVE DEVICES - POWERED PARTICLE FILTERING DEVICES INCORPORATING HELMETS OR HOODS - REQUIREMENTS, TESTING AND MARKING
ANSI/ASA S12.19 :1996(R2016)	MEASUREMENT OF OCCUPATIONAL NOISE EXPOSURE
ANSI S12.43 : 1997 : R2012	METHODS FOR MEASUREMENT OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS
ANSI S1.42 : 2001(R2016)	DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS
BS EN 60704-2-3:2002	Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Particular requirements for dishwashers
EN ISO 4869-2:1995/AC:2007	ACOUSTICS - HEARING PROTECTORS - PART 2: ESTIMATION OF EFFECTIVE A-WEIGHTED SOUND PRESSURE LEVELS WHEN HEARING PROTECTORS ARE WORN
ASTM F 1690 : 1996	Standard Specification for Humidifiers for Medical Use-Part 1 General Requirements for Active Humidification Systems
ISO 1680-1:1986	Acoustics Test code for the measurement of airborne noise emitted by rotating electrical machinery Part 1: Engineering method for free-field conditions over a reflecting plane
I.S. EN 61237-4:1998	BROADCAST VIDEO TAPE RECORDERS - METHODS OF MEASUREMENT - PART 4: ANALOGUE PERFORMANCE MEASUREMENTS
I.S. EN 62006:2011	HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS
ISO 14695:2003	Industrial fans Method of measurement of fan vibration
IEC 61007:1994	Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
DIN EN ISO 15744:2008-11	HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2)
DIN EN ISO 14257:2011-11	Acoustics - Measurement and parametric description of of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001)
ISO 140-3:1995	Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements
BS EN ISO 140-4:1998	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 4: FIELD MEASUREMENTS OF AIRBORNE SOUND INSULATION BETWEEN ROOMS
IEC 61481:2001+AMD1:2002+AMD2:2004 CSV	Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
BS EN ISO 15744:2002	HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2)
BS EN ISO 11689 : 1997	ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT
BS EN 12094-12:2003	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for pneumatic alarm devices
ISO 9613-2:1996	Acoustics Attenuation of sound during propagation outdoors Part 2: General method of calculation
BS EN ISO 5136:2009	Acoustics. Determination of sound power radiated into a duct by fans and other air-moving devices. In-duct method
ISO 3382:1997	Acoustics — Measurement of the reverberation time of rooms with reference to other acoustical parameters
BS EN ISO 11821:1997	ACOUSTICS - MEASUREMENTS OF THE IN SITU SOUND ATTENUATION OF A REMOVABLE SCREEN
ISO 11546-1:1995	Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes)
ISO 10052:2004	Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method
ISO 9614-3:2002	Acoustics Determination of sound power levels of noise sources using sound intensity Part 3: Precision method for measurement by scanning
IEC 60804:2000	Integrating-averaging sound level meters
ISO 11691:1995	Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method
IEC 61243-5:1997	Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS)
BS EN ISO 7785-2:1998	DENTAL HANDPIECES - STRAIGHT AND GEARED ANGLE HANDPIECES
BS EN ISO 4869-4:2000	ACOUSTICS - HEARING PROTECTORS - PART 4: MEASUREMENT OF EFFECTIVE SOUND PRESSURE LEVELS FOR LEVEL-DEPENDENT SOUND-RESTORATION EAR MUFFS
BS EN ISO 11690-1:1997	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACE CONTAINING MACHINERY - PART 1: NOISE CONTROL STRATEGIES
BS EN ISO 11546-2:2009	Acoustics. Determination of sound insulation performances of enclosures Measurements in situ (for acceptance and verification purposes)
BS EN 864:1997	MEDICAL ELECTRICAL EQUIPMENT - CAPNOMETERS FOR USE WITH HUMANS - PARTICULAR REQUIREMENTS
BS EN ISO 7785-1:1999	DENTAL HANDPIECES - PART 1: HIGH-SPEED AIR TURBINE HANDPIECES
BS EN ISO 11203:2009	Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
ISO 11498:1997	Dental handpieces Dental low-voltage electrical motors
UNE-EN ISO 3743-2:2010	Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)
ISO 12001:1996	Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code
ISO 7785-1:1997	Dental handpieces Part 1: High-speed air turbine handpieces
UNE-EN ISO 7235:2010	Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
ISO 7235:2003	Acoustics Laboratory measurement procedures for ducted silencers and air-terminal units Insertion loss, flow noise and total pressure loss
IEC 60268-5:2003+AMD1:2007 CSV	Sound system equipment - Part 5: Loudspeakers
ISO 140-5:1998	Acoustics Measurement of sound insulation in buildings and of building elements Part 5: Field measurements of airborne sound insulation of faade elements and faades
ISO 11957:1996	Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements
ISO 11819-1:1997	Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method
IEC 61237-4:1997	Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements
UNE-EN ISO 9614-3:2010	Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
IEC 61248-1:1996	Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification
ISO 9241-6:1999	Ergonomic requirements for office work with visual display terminals (VDTs) Part 6: Guidance on the work environment
UNE-EN ISO 12001:2010	Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
ISO 15744:2002	Hand-held non-electric power tools Noise measurement code Engineering method (grade 2)
UNE-EN ISO 11546-2:2010	Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
ISO 11064-6:2005	Ergonomic design of control centres Part 6: Environmental requirements for control centres
ISO 15606:1999	Dental handpieces Air-powered scalers and scaler tips
IEC 61252:1993+AMD1:2000+AMD2:2017 CSV	Electroacoustics - Specifications for personal sound exposure meters
ISO 14257:2001	Acoustics — Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance
ISO 140-6:1998	Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors
ISO 5840-2:2015	Cardiovascular implants Cardiac valve prostheses Part 2: Surgically implanted heart valve substitutes
IEC 62121:2001	Methods of measurement for minidisc recorders/players
BS EN ISO 5840:2009	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
UNE-EN ISO 3746:2010	Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995)
IEC 61606:1997	Audio and audiovisual equipment - Digital audio parts - Basic methods of measurement of audio characteristics
ISO 11821:1997	Acoustics Measurement of the in situ sound attenuation of a removable screen
ISO 11546-2:1995	Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes)
BS EN ISO 11820:1997	Acoustics. Measurements on silencers in situ
ISO 8359:1996	Oxygen concentrators for medical use Safety requirements
BS EN ISO 4871:2009	Acoustics. Declaration and verification of noise emission values of machinery and equipment
IEC 61996:2000	Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Performance requirements - Methods of testing and required test results
BS EN ISO 12001:2009	Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code
BS EN ISO 140-3:1995	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS
BS EN 791 : 1996	DRILL RIGS - SAFETY
BS EN ISO 140-7:1998	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 7: FIELD MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS
ONORM EN ISO 3743-2 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
BS EN ISO 140-5:1998	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 5: FIELD MEASUREMENTS OF AIRBORNE SOUND INSULATION OF FACADE ELEMENTS AND FACADES
UNE-EN ISO 4871:2010	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
IEC 61063:1991	Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery
EN 61481:2001/A2:2005	LIVE WORKING - PORTABLE PHASE COMPARATORS FOR USE ON VOLTAGES FROM 1 KV TO 36 KV A.C.
EN 61252:1995/A2:2017	ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS (IEC 61252:1993/A2:2017)
EN ISO 11957:2009	Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
EN 15657-1:2009	Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example
EN ISO 140-4:1998	Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms (ISO 140-4:1998)
EN ISO 4869-4:2000	ACOUSTICS - HEARING PROTECTORS - PART 4 - MEASUREMENT OF EFFECTIVE SOUND PRESSURE LEVELS FOR LEVEL-DEPENDENT SOUND-RESTORATION EAR-MUFFS
EN ISO 11064-6:2005	Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005)
EN ISO 15744 : 2008	Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002)
EN ISO 11819-1:2001	Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:1997)
EN ISO 11821 : 1997	ACOUSTICS - MEASUREMENT OF THE IN SITU SOUND ATTENUATION OF A REMOVABLE SCREEN
EN ISO 15606:1999	Dental handpieces - Air-powered scalers and scaler tips (ISO 15606:1999)
EN ISO 9612:2009	Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009)
EN ISO 3743-2:2009	Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)
EN ISO 17201-2:2006	Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation (ISO 17201-2:2006)
EN 864 : 1996	MEDICAL ELECTRICAL EQUIPMENT - CAPNOMETERS FOR USE WITH HUMANS - PARTICULAR REQUIREMENTS
EN ISO 12001:2009	Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
EN ISO 7785-1:1999	Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997)
EN ISO 9241-6:1999	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999)
EN 27574-1 : 1988	ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - GENERAL CONSIDERATIONS AND DEFINITIONS
EN ISO 140-7:1998	Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998)
EN ISO 11689:1996/AC:2009	Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996/Cor 1:2007)
EN ISO 140-5:1998	Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of façade elements and façades (ISO 140-5:1998)
EN 14035-4:2003/AC:2005	FIREWORKS - PART 4: BANGERS AND BANGER BATTERIES - SPECIFICATION AND TEST METHODS
EN ISO 140-12 : 2000	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR
EN ISO 8359:2009/A1:2012	OXYGEN CONCENTRATORS FOR MEDICAL USE - SAFETY REQUIREMENTS (ISO 8359:1996/AMD 1:2012)
EN 27785-1 : 1994	DENTAL HANDPIECES - PART 1: HIGH SPEED AIR TURBINE HANDPIECES
EN 1835 : 1999	RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
EN ISO 140-6 : 1998	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS
EN 270 : 94 AMD 1 2000	RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HOOD - REQUIREMENTS, TESTING, MARKING
EN ISO 9614-3:2009	Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
EN ISO 3382 : 2000	ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS
EN ISO 140-8 : 1997	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR
EN 14035-12:2003/AC:2005	FIREWORKS - PART 12: FLASH BANGERS AND FLASH BANGER BATTERIES - SPECIFICATION AND TEST METHODS
EN ISO 11546-1:2009	Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
EN ISO 13294:1997	Dental handpieces - Dental air-motors (ISO 13294:1997)
EN ISO 7785-2:1997	Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995)
EN 2719917 : 1991	ACOUSTICS - MEASUREMENT AT THE OPERATOR'S POSITION OF AIRBORNE NOISE EMITTED BY BRUSH SAWS
EN ISO 5136:2009	Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
EN ISO 11546-2:2009	Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
EN ISO 7235:2009	Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
EN ISO 14257 : 2001	ACOUSTICS - MEASUREMENT AND PARAMETRIC DESCRIPTION OF SPATIAL SOUND DISTRIBUTION CURVES IN WORKROOMS FOR EVALUATION OF THEIR ACOUSTICAL PERFORMANCE
EN 791:1995+A1:2009	Drill rigs - Safety
EN ISO 11498:1999	Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997)
EN ISO 140-3:1995/A1:2004	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS
EN ISO 4871:2009	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 25136 : 1993	ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS - IN-DUCT METHOD
EN 1454 : 1997	PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY
EN ISO 11820 : 1996	ACOUSTICS - MEASUREMENTS ON SILENCERS IN SITU
ISO 13472-1:2002	Acoustics Measurement of sound absorption properties of road surfaces in situ Part 1: Extended surface method
DIN EN 23742:1991-11	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR DISCRETE-FREQUENCY AND NARROW-BAND SOURCES IN REVERBERATION ROOMS
BS 5724-2.124(1998) : 1998	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
BS EN 60945:2002	Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results
DIN ISO 362:2003-08	ACOUSTICS - MEASUREMENT OF NOISE EMITTED BY ACCELERATING ROAD VEHICLES - ENGINEERING METHOD
DIN EN ISO 5840-1 E : 2015	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS (ISO 58401:2015)
01/707359 DC : DRAFT APR 2001	ISO/DIS 13325 - TYRES - COAST-BY-METHOD FOR MEASUREMENT OF TYRE/ROAD SOUND EMISSION
I.S. EN 12419:1999	RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A FULL FACE MASK, HALF MASK OR QUARTER MASK - REQUIREMENTS, TESTING MARKING
CSA Z107.54 : 1985	PROCEDURE FOR MEASUREMENT OF SOUND AND VIBRATION DUE TO BLASTING OPERATIONS
DIN EN 23741:1991-11	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR BROAD-BAND SOURCES IN REVERBERATION ROOMS
BS ISO 8579-1:2002	ACCEPTANCE CODE FOR GEAR UNITS - PART 1: TEST CODE FOR AIRBORNE SOUND
I.S. EN ISO 13294:1998	DENTAL HANDPIECES - DENTAL AIR-MOTORS
DIN VDE 0559-4 : 1988	POWER CONVERTERS FOR ROLLING STOCK - DIRECT D.C. CONVERTERS (D.C. CHOPPER CONVERTERS)
BS ISO 9611:1996	ACOUSTICS - CHARACTERIZATION OF SOURCES OF STRUCTURE-BORNE SOUND WITH RESPECT TO SOUND RADIATION FROM CONNECTED STRUCTURES - MEASUREMENT OF VELOCITY AT THE CONTACT POINTS OF MACHINERY WHEN RESILIENTLY MOUNTED
UNI ISO 9613-1 : 2006	Acoustics - Sound attenuation in outdoor propagation - Part 1: Calculation of atmospheric absorption
03/311729 DC : DRAFT JULY 2003	EN ISO 8041 - HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
BS ISO 18738:2003	LIFTS (ELEVATORS) - MEASUREMENT OF LIFT RIDE QUALITY
BS 7739-1:1994
03/101986 DC : DRAFT JAN 2003	BS EN ISO 17201-1 - ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: SOUND SOURCE ENERGY DETERMINATION OF MUZZLE BLAST
BS EN 62006:2011	Hydraulic machines. Acceptance tests of small hydroelectric installations
DIN EN ISO 11203:2010-01	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
09/30166871 DC : 0	BS EN 62520 - RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS FED BY POWER CONVERTERS
ISO 6798:1995	Reciprocating internal combustion engines Measurement of emitted airborne noise Engineering method and survey method
BIS IS 12193-3 : 2012(R2015)	METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 3: RECEIVERS FOR FREQUENCY-MODULATED SOUND BROADCASTING EMISSIONS
DIN 45640-2:1993-11	NOISE EMITTED BY VESSELS ON INLAND WATER-WAYS AND HARBOURS; ENVELOPING SURFACE METHOD FOR THE DETERMINATION OF THE SOUND POWER LEVEL
ANSI S12.62 : 2012	ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION
DIN EN ISO 9612:2009-09	ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD
14/30281560 DC : 0	BS EN ISO 5840-2 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES
UNI EN ISO 9612 : 2011	ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD
BS EN 50144-2-13 : 2002	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PARTICULAR REQUIREMENTS FOR CHAIN SAWS
11/30206274 DC : 0	BS EN 60349-4 - ELECTRIC TRACTION ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
BS 4196-8:1991	SOUND POWER LEVELS OF NOISE SOURCES - SPECIFICATION FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES
BS 4196-7:1988	SOUND POWER LEVELS OF NOISE SOURCES - SURVEY METHOD FOR DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING A REFERENCE SOUND SOURCE
BS EN 61043:1994	SPECIFICATION FOR ELECTROACOUSTICS - INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY - MEASUREMENT WITH PAIRS OF PRESSURE SENSING MICROPHONES
BS 848-2.5(2003) : 2003	ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
00/713944 DC : DRAFT SEP 2000	ISO/DIS 14695 - INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION
CEI EN 60315-4 : 1999	METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 4: RECEIVERS FOR FREQUENCY-MODULATED SOUND BROADCASTING EMISSIONS
AAMI ID26 : 2004 : R2013	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
BS 6864-1:1987	LABORATORY TESTS ON NOISE EMISSION FROM APPLIANCES AND EQUIPMENT INTENDED FOR USE IN WATER SUPPLY INSTALLATIONS - METHOD FOR MEASUREMENT
95/710815 DC : DRAFT AUG 1995	PREN 12076 - MEASUREMENT OF NOISE EMISSION FROM COMPRESSORS AND VACUUM PUMPS (ENGINEERING METHOD)
03/311404 DC : 0	IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CEI EN 60645-2 : 1997	AUDIOMETERS - PART 2: EQUIPMENT FOR SPEECH AUDIOMETRY
NF ISO 7183 : 1989	COMPRESSED AIR DRYERS - SPECIFICATIONS AND TESTS
IEEE C37.082-1982	STANDARD METHODS FOR THE MEASUREMENT OF SOUND PRESSURE LEVELS OF AC POWER CIRCUIT BREAKERS
I.S. EN 60094-5:1994	MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 5: ELECTRICAL MAGNETIC TAPE PROPERTIES
I.S. EN 61329:1999	SOUND SYSTEM EQUIPMENT - METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE OF SOUNDERS (ELECTROACOUSTIC TRANSDUCERS FOR TONE PRODUCTION)
NF ISO 230-5 : 2003	TEST CODE FOR MACHINE TOOLS - PART 5: DETERMINATION OF THE NOISE EMISSION
ANSI S12.53/2 : 1999 : R2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
ANSI S1.42 : 2001 : R2011	DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS
ANSI S12.18 : 1994 : R2009	PROCEDURES FOR OUTDOOR MEASUREMENT OF SOUND PRESSURE LEVEL
ANSI/ASA S1.42 : 2001(R2016)	DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS
ES 201 168 : 1.2.1	CORPORATE TELECOMMUNICATION NETWORKS (CN); TRANSMISSION CHARACTERISTICS OF DIGITAL PRIVATE BRANCH EXCHANGES (PBXS)
I.S. EN 60645-2:1999	AUDIOMETERS - PART 2: EQUIPMENT FOR SPEECH AUDIOMETRY
ANSI S12.44 : 1997 : R2007	METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL
ANSI S3.44 : 2016	DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE AND ESTIMATION OF NOISE-INDUCED HEARING IMPAIRMENT
EN 12733:2001+A1:2009	Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety
I.S. EN 61096:1993	METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS
IEC 60315-4:1997	Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions
ISO 4412-1:1991	Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps
IEC 61204:1993+AMD1:2001 CSV	Low-voltage power supply devices, d.c. output - Performance characteristics
DIN EN ISO 3743-2:2009-11	Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)
DIN EN ISO 9614-3:2009-11	Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
BS EN ISO 11064-6:2005	ERGONOMIC DESIGN OF CONTROL CENTRES - PART 6: ENVIRONMENTAL REQUIREMENTS FOR CONTROL CENTRES
ISO 11690-1:1996	Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies
IEC 61243-2:1995+AMD1:1999+AMD2:2002 CSV	Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.
ISO 140-7:1998	Acoustics Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of floors
UNE-EN ISO 11957:2010	Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
BS EN ISO 10052 : 2004	ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
ISO 13294:1997	Dental handpieces Dental air-motors
BS EN ISO 140-8:1998	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR
BS EN 1454:1997	PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY
BS EN ISO 9614-3:2009	Acoustics. Determination of sound power levels of noise sources using sound intensity Precision method for measurement by scanning
ISO 5128:1980	Acoustics Measurement of noise inside motor vehicles
ISO 5840-1:2015	Cardiovascular implants Cardiac valve prostheses Part 1: General requirements
BS EN 270:1995	RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HOOD - REQUIREMENTS, TESTING, MARKING
BS EN 25136:1994	ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS - IN-DUCT METHOD
IEC 61043:1993	Electroacoustics - Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones
DIN EN ISO 5840:2009-08	CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
EN 61243-5:2001	Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS)
EN 61996:2000	Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Performance requirements - Methods of testing and required test results
EN 61606 : 1997	AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC METHODS OF MEASUREMENT OF AUDIO CHARACTERISTICS
EN 61029-1:2009/A11:2010	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
EN 61237-4:1997	Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements
DIN EN ISO 140-3:2005-03	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS
DIN EN ISO 12001:2010-01	Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
EN 61243-2:1997/A2:2002	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
EN 61248-1 : 1997	Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification
EN 60268-5:2003/A1:2009	SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
EN 60315-7:1995	Methods of measurement on radio receivers for various classes of emission - Part 7: Methods of measurement on digital satellite radio (DSR) receivers
EN 60094-5:1993/A1:1996	MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 5: ELECTRICAL MAGNETIC TAPE PROPERTIES
DIN EN 457:1992-04	SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
DIN EN ISO 11064-6:2005-10	Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005)
EN ISO 5840:2009	Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005)
EN 60804:2000	Integrating-averaging sound level meters
EN 50144-2-13:2002	Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws
EN 60551:1992/A1:1997	DETERMINATION OF TRANSFORMER AND REACTOR SOUND LEVELS
DIN EN ISO 5136:2009-11	Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
DIN EN ISO 11546-2:2010-01	Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
DIN EN ISO 14509:2001-03	SMALL CRAFT - MEASUREMENT OF AIRBORNE SOUND EMITTED BY POWERED RECREATIONAL CRAFT
EN 50144-1 : 98 COR 2005	SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 11546-1:2010-01	Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
EN 60704-2-3:2002/A1:2005	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-3: PARTICULAR REQUIREMENTS FOR DISHWASHERS
EN 60244-1:2000	Methods of measurement for radio transmitters - Part 1: General characteristics for broadcast transmitters
EN 61204:1995/A1:2001	LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS (IEC 61204:1993, MODIFIED + A1:2001)
EN 50332-1:2013	Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment"
NF EN ISO 11203 : 2009	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
EN 60094-3:1996/A3:1996	MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 3: METHODS OF MEASURING THE CHARACTERISTICS OF RECORDING AND REPRODUCING EQUIPMENT FOR SOUND ON MAGNETIC TAPE

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format