I.S. EN 50272-4:2007
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 4: BATTERIES FOR USE IN PORTABLE APPLIANCES
Hardcopy , PDF
09-04-2021
English
01-01-2007
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Introduction
1 Scope
2 Normative references
3 Definitions
4 Operating instructions
5 Dimensions and interchangeability of cells and batteries
6 Electrical safety
6.1 Protection against incorrect connection polarity
6.2 Design of battery and battery compartments
6.3 Compartments for consumer replaceable batteries
7 Safe handling and protection against misuse
7.1 Charging
7.2 Thermal abuse
7.3 Mechanical impact
7.4 Protection against pole reversal in the event of deep
discharge
7.5 Protection against electrical overload
7.6 Safe handling
8 Battery compartments
8.1 Battery accommodation
8.2 Replacement battery enclosures
8.3 Battery contacts
8.4 Protection against hazards caused by released gas
9 Measures in the event of accidents with batteries
9.1 Swallowing button cells
9.2 Burns or positioning caused byleaking batteries
10 Marking and disposal of batteries for use in portable
appliances
Annex A (informative) Instructions for use and
recommendations to the end-users
A.1 Instructions for use
A.2 Recommendations to the end-users
Bibliography
Applies to the safety aspects associated with the accommodation, the arrangements of circuits and the operation of secondary cells and batteries in portable appliances.
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| DIN EN 50272-4 : 2007 | Identical |
| BS EN 50272-4:2007 | Identical |
| NBN EN 50272-4 : 2007 | Identical |
| SN EN 50272-4 : 2007 | Identical |
| UNE-EN 50272-4:2007 | Identical |
| NF EN 50272-4 : 2007 | Identical |
| EN 50272-4:2007 | Identical |
| NEN EN 50272-4 : 2007 | Identical |
| IEC 62281:2016 | Safety of primary and secondary lithium cells and batteries during transport |
| IEC 61960:2011 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications |
| IEC TR 61438:1996 | Possible safety and health hazards in the use of alkaline secondary cells and batteries - Guide to equipment manufacturers and users |
| EN 62281:2017 | Safety of primary and secondary lithium cells and batteries during transport |
| EN 60086-3:2016 | Primary batteries - Part 3: Watch batteries |
| EN 61951-1:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-cadmium |
| EN 60086-5:2016 | Primary batteries - Part 5: Safety of batteries with aqueous electrolyte |
| EN 61056-1:2012 | General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test |
| IEC 60050-482:2004 | International Electrotechnical Vocabulary (IEV) - Part 482: Primary and secondary cells and batteries |
| EN 61056-2:2012 | General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking |
| IEC 61056-2:2012 | General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking |
| IEC TR 62188:2003 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Design and manufacturing recommendations for portable batteries made from sealed secondary cells |
| EN 61951-2:2017 | Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride |
| EN 61959:2004 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries |
| IEC 61951-2:2017 | Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride |
| IEC 61951-1:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-Cadmium |
| IEC 61056-1:2012 | General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test |
| EN 60086-1:2015 | Primary batteries - Part 1: General |
| EN 50272-2:2001 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| IEC 60086-2:2015 | Primary batteries - Part 2: Physical and electrical specifications |
| EN 61960:2011 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications |
| EN 60086-2:2016 | Primary batteries - Part 2: Physical and electrical specifications |
| EN 61429:1996/A11:1998 | MARKING OF SECONDARY CELLS AND BATTERIES WITH THE INTERNATIONAL RECYCLING SYMBOL ISO 7000-1135 AND INDICATIONS REGARDING DIRECTIVES 93/86/EEC AND 91/157/EEC |
| IEC 60086-1:2015 | Primary batteries - Part 1: General |
| EN 60086-4:2015 | Primary batteries - Part 4: Safety of lithium batteries |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| IEC 61429:1995 | Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 |
| IEC 60086-5:2016 | Primary batteries - Part 5: Safety of batteries with aqueous electrolyte |
| IEC 60086-4:2014 | Primary batteries - Part 4: Safety of lithium batteries |
| IEC 61959:2004 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries |
| IEC 60086-3:2016 | Primary batteries - Part 3: Watch batteries |
| EN 62133:2013 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.