IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
ISO 16750-2:2012
|
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads |
ISO 6469-2:2009
|
Electrically propelled road vehicles Safety specifications Part 2: Vehicle operational safety means and protection against failures |
ISO 16750-4:2010
|
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads |
IEC 61287-1:2014
|
Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
IEC 61373:2010
|
Railway applications - Rolling stock equipment - Shock and vibration tests |
EN 61557-2:2007
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance |
ISO 16750-5:2010
|
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads |
ISO 23273:2013
|
Fuel cell road vehicles Safety specifications Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen |
IEC 60322:2001
|
Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction |
EN 50122-1:2011/A4:2017
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
ISO 7637-3:2016
|
Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
ISO 16750-1:2006
|
Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General |
ISO 7637-1:2015
|
Road vehicles Electrical disturbances from conduction and coupling Part 1: Definitions and general considerations |
EN 50128:2011/AC:2014
|
RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
EN 50500 : 2008 AMD 1 2015
|
MEASUREMENT PROCEDURES OF MAGNETIC FIELD LEVELS GENERATED BY ELECTRONIC AND ELECTRICAL APPARATUS IN THE RAILWAY ENVIRONMENT WITH RESPECT TO HUMAN EXPOSURE |
EN 61377-1:2006/corrigendum:2006
|
RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL SYSTEM |
ISO 10099:2001
|
Pneumatic fluid power — Cylinders — Final examination and acceptance criteria |
EN 61373:2010/AC:2017-09
|
RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
ISO 7637-2:2011
|
Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
EN 60721-3-5:1997
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations |
IEC 60721-3-5:1997
|
Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations |
EN 50153 : 2014 AMD 1 2017
|
RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
IEC 61000-3-12:2011
|
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase |
EN 61111 : 2009
|
LIVE WORKING - ELECTRICAL INSULATING MATTING |
EN 62196-1:2014
|
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
ISO 6469-1:2009
|
Electrically propelled road vehicles Safety specifications Part 1: On-board rechargeable energy storage system (RESS) |
IEC 61111:2009
|
Live working - Electrical insulating matting |
IEC 60850:2014
|
Railway applications - Supply voltages of traction systems |
EN 62576:2010
|
Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics |
EN 60112 : 2003 AMD 1 2009
|
METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
EN 50215:2009
|
Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
EN 50178:1997
|
Electronic equipment for use in power installations |
DIN VDE 0701-0702 : 2008-06
|
INSPECTION AFTER REPAIR, MODIFICATION OF ELECTRICAL APPLIANCES - PERIODIC INSPECTION ON ELECTRICAL APPLIANCES - GENERAL REQUIREMENTS FOR ELECTRICAL SAFETY |
IEC 62576:2009
|
Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics |
EN 50124-1:2017
|
Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
EN 50125-1:2014
|
Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
ISO 16750-3:2012
|
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads |
EN 50119 : 2009 AMD 1 2013
|
RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
EN 50110-1:2013
|
Operation of electrical installations - Part 1: General requirements |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
EN 50129 : 2003 COR 2010
|
RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
EN 50163 : 2004 COR 2013
|
RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
ISO 9001:2015
|
Quality management systems — Requirements |
EN 61000-3-12:2011
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011) |
ISO 6469-3:2011
|
Electrically propelled road vehicles Safety specifications Part 3: Protection of persons against electric shock |
EN 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
EN 50355:2013
|
Railway applications - Railway rolling stock cables having special fire performance - Guide to use |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
IEC 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
EN 61557-8:2015/AC:2016-06
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems |
IEC 61557-8:2014
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems |
EN 45545-5:2013+A1:2015
|
Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
EN 61287-1:2014/AC:2014
|
RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014) |
EN 60322:2001
|
Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction |
IEC 60445:2017
|
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
IEC 61377-1:2006
|
Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system |
EN 50272-3 : 2002 COR 2003
|
SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES |
IEC 62196-1:2014
|
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
IEC 60310:2016
|
Railway applications - Traction transformers and inductors on board rolling stock |