Skip to content
Please enter a keyword to search
  • Preview

    I.S. EN 60310:2016

    Current The latest, up-to-date edition.

    RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2016

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    National Foreword
    FOREWORD
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Classification
    5 Service conditions
    6 Rated current and load profile
    7 Rated voltage and power of transformer windings
    8 Transformer tappings
    9 Cooling
    10 Temperature limits
    11 Mechanical design
    12 Rating plates
    13 Tests
    Annex A (informative) - List of items for which an
            agreement between purchaser and manufacturer
            is needed or for which further information or
            specifications shall be given by the purchaser or
            by the manufacturer
    Annex B (informative) - Thermal ageing and insulation
            life time
    Annex C (informative) - Example of thermal endurance
            calculation to demonstrate the suitability of an
            insulation system for a specified application
    Annex D (informative) - Wet dielectric tests for dry-type
            transformers and inductors
    Annex E (informative) - Load profiles
    Bibliography
    Annex ZA (normative) - Normative references to
             international publications with their
             corresponding European publications

    Abstract - (Show below) - (Hide below)

    Pertains to traction and auxiliary power transformers installed on board rolling stock and to the various types of power inductors inserted in the traction and auxiliary circuits of rolling stock, of dry or liquid-immersed design.

    General Product Information - (Show below) - (Hide below)

    Development Note For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60060-2:2010 High-voltage test techniques - Part 2: Measuring systems
    IEC 60270:2000+AMD1:2015 CSV High-voltage test techniques - Partial discharge measurements
    IEC 60076-7:2005 Power transformers - Part 7: Loading guide for oil-immersed power transformers
    IEC 61287-1:2014 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
    EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
    IEC 61373:2010 Railway applications - Rolling stock equipment - Shock and vibration tests
    IEC 60050-811:1991 International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
    EN 60076-4:2002 Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors
    EN 60085:2008 Electrical insulation - Thermal evaluation and designation
    IEC 61039:2008 Classification of insulating liquids
    EN 61373:2010/AC:2017-09 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010)
    EN 60076-5:2006 Power transformers - Part 5: Ability to withstand short-circuit
    EN 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
    IEC 60076-10:2016 Power transformers - Part 10: Determination of sound levels
    IEC 60076-18:2012 Power transformers - Part 18: Measurement of frequency response
    EN 60076-11:2004 Power transformers - Part 11: Dry-type transformers
    EN 61099:2010 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
    IEC 60076-5:2006 Power transformers - Part 5: Ability to withstand short circuit
    IEC 60076-14:2013 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials
    EN 61039 : 2008 CLASSIFICATION OF INSULATING LIQUIDS
    IEC 60850:2014 Railway applications - Supply voltages of traction systems
    IEC 61099:2010 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
    EN 60270:2001/A1:2016 HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015)
    IEC 60076-4:1976 Power transformers - Part 4: Tappings and connections
    IEC 60505:2011 Evaluation and qualification of electrical insulation systems
    IEC 60836:2015 Specifications for unused silicone insulating liquids for electrotechnical purposes
    IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
    IEC 60076-12:2008 Power transformers - Part 12: Loading guide for dry-type power transformers
    EN 60076-10:2016 Power transformers - Part 10: Determination of sound levels
    IEC 60296:2012 RLV Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
    EN 60060-2:2011 High-voltage test techniques - Part 2: Measuring systems
    IEC 60076-3:2013 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
    IEC 60050-421:1990 International Electrotechnical Vocabulary (IEV) - Part 421: Power transformers and reactors
    EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
    EN 60296:2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
    EN 60836:2015 Specifications for unused silicone insulating liquids for electrotechnical purposes
    IEC 60076-1:2011 Power transformers - Part 1: General
    IEC 60076-6:2007 Power transformers - Part 6: Reactors
    EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
    EN 60076-14:2013 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials
    EN 60076-1:2011 POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011)
    EN ISO 9614-2 : 1996 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING
    IEC 60076-2:2011 Power transformers - Part 2: Temperature rise for liquid-immersed transformers
    IEC 62497-1:2010+AMD1:2013 CSV Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment
    EN 60076-18 : 2012 POWER TRANSFORMERS - PART 18: MEASUREMENT OF FREQUENCY RESPONSE (IEC 60076-18:2012)
    IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
    IEC 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
    EN 61378-1:2011 Convertor transformers - Part 1: Transformers for industrial applications
    EN 60505:2011/AC:2017-03 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017)
    IEC 60077-1:2017 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
    EN 60076-2:2011 Power transformers - Part 2: Temperature rise for liquid-immersed transformers
    EN 61287-1:2014/AC:2014 RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014)
    EN ISO 9614-1:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)
    IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
    IEC 61378-1:2011 Converter transformers - Part 1: Transformers for industrial applications
    IEC 62498-1:2010 Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
    EN 60076-6:2008 Power transformers - Part 6: Reactors
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective