I.S. EN 61096:1993
Current
The latest, up-to-date edition.
METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS
Hardcopy , PDF
English
01-01-1993
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1 Scope and object
2 Normative references
3 Terminology
4 Information required from manufacturers of CD players
4.1 Identification
4.2 Standard conditions for measurements
4.3 Performance claims
4.4 Additional considerations
5 Measurement of electrical parameters
5.1 Maximum power consumption
5.2 Reference output voltage
5.3 Channel unbalance at 1 kHz
5.4 Total cross-talk attenuation
5.5 Frequency response without de-emphasis
5.6 Frequency response with de-emphasis
5.7 Idle channel signal-to-noise ratio
5.8 Dynamic range (active channel signal-to-noise ratio)
5.9 Distortion and noise
5.10 Modulation distortion
5.11 Frequency error
5.12 Phase difference between channels
5.13 Level non-linearity
5.14 Output polarity
5.15 Access times
5.16 CD player performance in case of CD defects and
mechanical deviating properties
Annexes
A (informative) Examples of available test discs
B (informative) Table of measurements - Results
C (informative) Test CD requirements
ZA (normative) Other International Publications quoted in
this standard with the references of the
relevant European Publications
Applicable to reproducing equipment for digital audio compact discs that conform to the specifications of IEC 60908.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
90
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN 61096 : 1994 AMD 1 1997 | Identical |
| EN 61096:1993/A1:1996 | Identical |
| NF EN 61096 : 93 AMD 1 97 | Identical |
| SN EN 61096 : 1993 AMD 1 1996 | Identical |
| BS EN 61096:1993 | Identical |
| DIN EN 61096:1993-10 | Identical |
| IEC 60038:2009 | IEC standard voltages |
| ISO 3742:1988 | Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms |
| IEC TR 60268-13:1998 | Sound system equipment - Part 13: Listening tests on loudspeakers |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| ISO 3743-2:1994 | Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| EN 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations |
| IEC 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations |
| HD 483.15 : 200S4 | SOUND SYSTEM EQUIPMENT - PREFERRED MATCHING VALUES FOR THE INTERCONNECTION OF SOUND SYSTEM COMPONENTS |
| ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
| EN 60908:1999 | Audio recording - Compact disc digital audio system |
| HD 472 S1:1989/AC:2013 | NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
| IEC 60958:1989 | Digital audio interface |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60908:1999 | Audio recording - Compact disc digital audio system |
| IEC 60225:1966 | Octave, half-octave and third-octave band filters intended for the analysis of sounds and vibrations |
| ISO 532:1975 | Acoustics Method for calculating loudness level |
| EN 23742 : 1991 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHOD FOR DISCRETE-FREQUENCY AND NARROW-BAND SOURCES IN REVERBERATION ROOMS |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 23741 : 1991 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR BROADBAND SOURCES IN REVERBERATION ROOMS |
| IEC 60268-15:1996 | Sound system equipment - Part 15: Preferred matching values for the interconnection of sound system components. |
| HD 483.1 : 200S2 | SOUND SYSTEM EQUIPMENT - GENERAL |
| IEC 60268-1:1985 | Sound system equipment. Part 1: General |
| EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| HD 195 : 200S6 | SAFETY REQUIREMENTS FOR MAINS OPERATED ELECTRONIC AND RELATED APPARATUS FOR HOUSEHOLD AND SIMILAR GENERAL USE |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| EN 60651:1994/A2:2001 | SOUND LEVEL METERS (IEC 60651:1979/A2:2000) |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| EN 60958:1990/A2:1995 | DIGITAL AUDIO INTERFACE |
| HD 483.2 : 200S2 | SOUND SYSTEM EQUIPMENT - EXPLANATION OF GENERAL TERMS AND CALCULATION METHODS |
| IEC 60651:1979+AMD1:1993+AMD2:2000 CSV | Sound level meters |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.