I.S. EN 61248-1:1998
Current
The latest, up-to-date edition.
TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 1: GENERIC SPECIFICATION
Hardcopy , PDF
English
01-01-1998
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1 General
1.1 Scope
1.2 Normative references
1.3 General considerations
1.4 Terminology
1.5 AQLs for particular parameter and for the whole
sample of components
1.6 Letter symbols, signs and abbreviations
1.7 Graphical symbols
1.8 Marking of the component and package
1.9 Structurally similar components
1.10 Delayed delivery
1.11 Certified test records
1.12 Standard ratings and characteristics
1.13 Ordering information
1.14 Quality conformance inspection
2 Tests
3 Capability approval procedures
3.1 Eligibility for capability approval
3.2 Application for capability approval
3.3 Description of capability
3.4 Appraisal of capability
3.5 Announcement of capability approval
3.6 Maintenance of capability approval
3.7 Changes to the approved capability
Annexes
A (informative) Sample format for certified test record
B (informative) Sample format for abstract of description
of capability for inclusion in QC 001005
(IECQ Register of approval)
ZA (normative) Normative references to international
publications with their corresponding
European publications
INDEX
Defines compliance requirements for manufacturers of transformers and inductors to be used in electronic equipment so as to obtain capability approval according to 11.7 of QC 001002, together with the component test schedules for assessing that capability.
| DevelopmentNote |
Supersedes I.S. EN 126000. (08/2005) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
74
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 61248-1 : 1998 | Identical |
| IEC 61248-1:1996 | Identical |
| SN EN 61248-1 : 1997 | Identical |
| DIN EN 61248-1:1998-05 | Identical |
| BS EN 61248-1:1997 | Identical |
| NF EN 61248-1 : 1998 | Identical |
| EN 61248-1 : 1997 | Identical |
| HD 323.2.20 : 200S3 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60367-1:1982 | Cores for inductors and transformers for telecommunications. Part 1: Measuring methods |
| HD 323.2.13 : 200S1 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST M: LOW AIR PRESSURE |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60068-2-13:1983 | Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| EN 61007:1997 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures |
| HD 323.2.14 : 200S2 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST N: OF TEMPERATURE |
| EN 60068-2-7:1993 | Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state |
| IEC 61007:1994 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures |
| IECQ 001004:2006 | |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| HD 323.2.3 : 200S2 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST CA - DAMP HEAT, STEADY STATE |
| IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
| IEC GUIDE 102:1996 | Electronic components - Specification structures for quality assessment (Qualification approval and capability approval) |
| IEC 60852-5:1994 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 5: Transformers and inductors using the series Q of C-cores |
| EN 60068-2-17:1994 | Environmental testing - Part 2: Tests - Test Q: Sealing |
| HD 323.2.6 : 200S2 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST FC AND GUIDANCE: VIBRATION (SINUSOIDAL) |
| IEC 60068-2-17:1994 | Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing |
| IEC 60076-1:2011 | Power transformers - Part 1: General |
| EN 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
| EN 60068-2-29:1993 | Environmental testing - Part 2: Tests - Test Eb and guidance: Bump |
| IEC 60068-2-29:1987 | Environmental testing. Part 2: Tests. Test Eb and guidance: Bump |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60651:1994/A2:2001 | SOUND LEVEL METERS (IEC 60651:1979/A2:2000) |
| HD 323.2.58 : 200S1 | TEST TD: SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60651:1979+AMD1:1993+AMD2:2000 CSV | Sound level meters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.