IEC 60721-1:1990+AMD1:1992+AMD2:1995 CSV
|
Classification of environmental conditions - Part 1: Environmental parameters and their severities |
IEC 60654-4:1987
|
Operating conditions for industrial-process measurement and control equipment. Part 4: Corrosive and erosive influences |
IEC 60068-2-5:2010
|
Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing |
IEC 60793-1-1 : 2017
|
OPTICAL FIBRES - PART 1-1: MEASUREMENT METHODS AND TEST PROCEDURES - GENERAL AND GUIDANCE |
IEC 60068-2-43:2003
|
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections |
EN 61300-2-18:2005
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance |
IEC 60068-1:2013
|
Environmental testing - Part 1: General and guidance |
EN 60825-1:2014/AC:2017-06
|
SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
EN 60068-2-42:2003
|
Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
EN 60793-1-1:2017
|
Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance |
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
IEC 60068-2-27:2008
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC TR 62362:2010
|
Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics - Guidance |
EN 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold |
IEC 60793-2:2015
|
Optical fibres - Part 2: Product specifications - General |
IEC TR 62222:2012
|
Fire performance of communication cables installed in buildings |
EN 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60068-2-13:1983
|
Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
EN 60068-1:2014
|
Environmental testing - Part 1: General and guidance |
EN 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements |
IEC 60794-1-2:2017
|
Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
EN 60794-1-1:2016
|
Optical fibre cables - Part 1-1: Generic specification - General |
IEC 60068-2-11:1981
|
Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
IEC 60825-1:2014
|
Safety of laser products - Part 1: Equipment classification and requirements |
EN 61300-2-22:2007
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature |
EN 61000-4-2:2009
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61300-2-46:2006
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic |
IEC 60794-1-1:2015
|
Optical fibre cables - Part 1-1: Generic specification - General |
EN 60079-28:2015
|
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
EN 60874-1:2012
|
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
IEC TR 62627-01:2016
|
Fibre optic interconnecting devices and passive components - Part 01: Fibre optic connector cleaning methods |
IEC TR 62283:2010
|
Optical fibres - Guidance for nuclear radiation tests |
ISO/IEC TR 29106:2007
|
Information technology Generic cabling Introduction to the MICE environmental classification |
EN 61000-4-3 : 2006 AMD 2 2010
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
ISO/IEC Guide 99:2007
|
International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
EN 60793-1-54:2013
|
Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation |
EN 60068-2-27:2009
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
EN 61300-2-34:2009
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures |
IEC 61300-2-18:2005
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance |
IEC 61300-2-22:2007
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature |
IEC 60874-1:2011
|
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
IEC 61300-3-35:2015 RLV
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers |
IEC 60068-2-10:2005
|
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth |
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 61000-4-2:2008
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 60793-1-54 : 2.0
|
OPTICAL FIBRES - PART 1-54: MEASUREMENT METHODS AND TEST PROCEDURES - GAMMA IRRADIATION |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
IEC 61300-2-34:2009
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures |
EN 61300-3-35:2015
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers |
EN 60793-2:2016
|
Optical fibres - Part 2: Product specifications - General |
EN 60794-1-2:2017/AC:2017-07
|
OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE (IEC 60794-1-2:2017) |
IEC 60068-2-42:2003
|
Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
EN 60068-2-78:2013
|
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
EN 60068-2-13:1999
|
Environmental testing - Part 2: Tests - Test M: Low air pressure |
EN 60068-2-6:2008
|
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
EN 61000-4-4:2012
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
EN 60068-2-43:2003
|
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections |
EN 60068-2-11:1999
|
Environmental testing - Part 2: Tests - Test Ka: Salt mist |
IEC 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements |
EN 60068-2-5:2011
|
Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing |
EN 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
EN 60695-11-5:2017
|
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
IEC 60695-11-5 : 2.0
|
FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
EN 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
ISO/IEC Guide 98-3:2008
|
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
EN 61300-2-46:2006
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic |
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |